This guide walks you through how to install doorbell camera Akaso safely and correctly, whether you’re replacing an old doorbell or setting up a new one. You’ll learn wiring, app setup, and troubleshooting tips for a smooth installation.
Key Takeaways
- Turn off power first: Always shut off electricity at the breaker before handling wires to prevent shocks or damage.
- Check compatibility: Ensure your doorbell wiring and voltage (16–24V AC) support the Akaso doorbell camera.
- Use the right tools: A screwdriver, voltage tester, and drill (if needed) make installation faster and safer.
- Download the Akaso app: The app is essential for pairing, live viewing, motion alerts, and settings customization.
- Mount securely: Position the camera at 4–6 feet high with a clear view of your doorway and minimal glare.
- Test after install: Power on and verify video, audio, Wi-Fi, and motion detection work properly.
- Troubleshoot common issues: If the camera won’t connect or video is blurry, check Wi-Fi, power, or reset the device.
Introduction: Why Install an Akaso Doorbell Camera?
Installing a doorbell camera like the Akaso model is one of the smartest upgrades you can make to your home security. Whether you’re tired of missing deliveries, want to keep an eye on visitors, or just crave peace of mind, a smart doorbell camera gives you real-time alerts and live video from your phone—no matter where you are. The Akaso doorbell camera is affordable, easy to use, and packed with features like HD video, two-way audio, night vision, and motion detection.
In this guide, you’ll learn exactly how to install doorbell camera Akaso from start to finish. We’ll cover everything from checking your existing doorbell setup to mounting the device, connecting it to your Wi-Fi, and using the app. Whether you’re replacing an old wired doorbell or installing a new one, this step-by-step walkthrough ensures a smooth, safe, and successful installation.
By the end, you’ll have a fully functional smart doorbell that enhances your home’s safety and convenience. Let’s get started!
What You’ll Need Before You Begin
Visual guide about How to Install Doorbell Camera Akaso
Image source: storage.googleapis.com
Before you touch a single wire, make sure you have the right tools and materials. Rushing into installation without preparation can lead to mistakes, damage, or even injury.
Essential Tools and Supplies
- Screwdriver set: A Phillips head is most common, but have a flathead handy too.
- Voltage tester: This non-contact tester helps confirm power is off and checks if your doorbell transformer is working.
- Drill and drill bits: You may need this if mounting on brick, concrete, or if you’re installing a new doorbell where none existed.
- Wire strippers: Useful if you need to trim or re-strip old wires.
- Pencil or marker: For marking drill holes.
- Level: Ensures your doorbell is straight.
- Smartphone or tablet: Required to download and use the Akaso app.
- Wi-Fi network: The camera needs a 2.4 GHz Wi-Fi signal (5 GHz is not supported).
Akaso Doorbell Camera Kit Contents
When you open your Akaso doorbell camera box, you should find:
- The Akaso doorbell camera unit
- Mounting bracket (usually included)
- Screws and wall anchors
- Wire connectors or terminal screws
- User manual and quick start guide
- Optional: Chime connector (if your model includes one)
Check Your Existing Doorbell Setup
If you’re replacing an old doorbell, inspect the current setup:
- Are there two wires connected to the doorbell button? (Most wired models need two wires.)
- Is the doorbell chime mechanical (with a physical bell) or digital?
- What’s the voltage? Use a multimeter or voltage tester to check—Akaso cameras typically require 16–24V AC.
If you don’t have an existing doorbell, you’ll need to run wires from your doorbell transformer to the front door. This is more complex and may require professional help. Most homeowners installing Akaso cameras are replacing an existing wired doorbell, which is much simpler.
Step 1: Turn Off the Power
Safety first! Electricity and water don’t mix, and even low-voltage doorbell wires can give a shock or damage your camera if mishandled.
Locate Your Circuit Breaker
Go to your home’s main electrical panel (usually in the basement, garage, or utility closet). Look for a breaker labeled “doorbell,” “chime,” or “front door.” If there’s no label, you may need to test breakers one by one.
Turn Off the Correct Breaker
Switch the breaker to the “OFF” position. To double-check, go to your doorbell and press the button. If the chime doesn’t sound, power is off. For extra safety, use a non-contact voltage tester near the doorbell wires to confirm no current is flowing.
Pro Tip: Place a piece of tape over the breaker switch with a note like “Do not turn on – installing doorbell.” This prevents someone else from accidentally restoring power.
Step 2: Remove the Old Doorbell
Now that power is off, it’s time to remove your existing doorbell button.
Unscrew the Faceplate
Use your screwdriver to remove the screws holding the old doorbell button to the wall. Gently pull the button away from the wall. You’ll see two wires connected to the back.
Disconnect the Wires
Loosen the terminal screws or pull the wires out of the back (depending on the model). Label them with tape if needed—though most doorbells only have two wires, so polarity usually doesn’t matter.
Inspect the Wires
Check the condition of the wires. Are they frayed, corroded, or too short? If so, you may need to strip fresh ends or extend them. Use wire strippers to remove about 1/4 inch of insulation from each wire if needed.
Secure the Wires
Tape the wires to the wall or hold them with a small piece of tape so they don’t fall back into the wall. You’ll need them for the new Akaso camera.
Step 3: Install the Mounting Bracket
The Akaso doorbell camera comes with a mounting bracket that attaches to the wall. This bracket holds the camera securely and often includes wire terminals.
Position the Bracket
Hold the bracket against the wall where you want to install the camera. Ideal height is 4 to 6 feet from the ground—this gives a good view of visitors’ faces and avoids tampering.
Use a level to make sure the bracket is straight. Mark the screw holes with a pencil.
Drill Pilot Holes (If Needed)
If you’re mounting on wood, you can screw directly. For brick, concrete, or siding, drill pilot holes using a masonry bit. Insert wall anchors if provided.
Attach the Bracket
Line up the bracket with the holes and secure it with screws. Make sure it’s tight and level.
Connect the Wires
Feed the two doorbell wires through the bracket’s wire channel. Connect them to the terminal screws on the bracket (usually labeled “Front” and “Trans”). Tighten the screws securely.
Note: Some Akaso models have a built-in chime connector that goes inside your doorbell chime box. If yours includes one, follow the manual to install it. This helps stabilize power and prevent buzzing.
Step 4: Attach the Akaso Doorbell Camera
With the bracket in place and wires connected, it’s time to mount the camera.
Align the Camera
Hold the Akaso camera against the bracket. Most models snap into place or slide down and lock.
Secure with Screws (If Required)
Some brackets include a security screw to prevent theft. If yours does, insert and tighten it with a screwdriver. Keep the screw in a safe place—you’ll need it to remove the camera later.
Double-Check Connections
Make sure the camera is firmly seated and the wires aren’t pinched or loose.
Step 5: Restore Power and Test the Hardware
Now it’s time to turn the power back on and see if the camera powers up.
Turn On the Breaker
Go back to the electrical panel and flip the breaker to “ON.”
Check for Power
The Akaso camera should light up or show a status LED. Common indicators:
- Solid red: Power on, not connected to Wi-Fi
- Blinking red: Ready to pair
- Solid green: Connected and working
If nothing happens, double-check your wiring and breaker. Use a voltage tester to confirm power at the doorbell.
Test the Doorbell Button
Press the button on the camera. Your indoor chime should ring (if wired). If it doesn’t, the chime connector may be needed or your chime may not be compatible.
Step 6: Download and Set Up the Akaso App
The Akaso app is the control center for your doorbell camera. It’s available for free on the Apple App Store and Google Play.
Download the App
Search for “Akaso Smart” or “Akaso Home” in your app store. Download and install it.
Create an Account
Open the app and sign up with your email or phone number. Verify your account if required.
Add a New Device
Tap the “+” or “Add Device” button. Select “Doorbell Camera” from the list.
Scan the QR Code
The app will ask you to scan the QR code on the back of your Akaso camera or in the manual. Point your phone’s camera at the code to proceed.
Connect to Wi-Fi
The app will prompt you to connect the doorbell to your Wi-Fi network. Important notes:
- Only 2.4 GHz Wi-Fi is supported—5 GHz networks won’t work.
- Make sure your phone is connected to the same 2.4 GHz network.
- Enter your Wi-Fi password carefully—case-sensitive.
The camera will attempt to connect. This may take 30–60 seconds.
Complete Setup
Once connected, the app will confirm success. You can now name your doorbell (e.g., “Front Door”), set motion zones, adjust sensitivity, and enable notifications.
Step 7: Configure Settings and Features
Now that your Akaso doorbell camera is online, customize it to fit your lifestyle.
Motion Detection
Go to the app’s settings and adjust motion sensitivity. High sensitivity catches more movement but may trigger false alerts (like passing cars). Medium or low is often best for front doors.
Motion Zones
Draw zones on the camera’s view to focus alerts on specific areas (e.g., your porch, not the sidewalk). This reduces unnecessary notifications.
Night Vision
Akaso cameras have infrared night vision. Test it by viewing the feed at night. Make sure nothing is blocking the IR sensors.
Two-Way Audio
Tap the microphone icon in the app to talk to visitors. Speak clearly and wait a second for the audio to transmit.
Recording and Alerts
Enable motion alerts so you get a notification when someone approaches. Some models support cloud storage or local SD card recording—check your plan.
Privacy Settings
You can disable the camera or microphone when needed (e.g., during private events). Look for a “Privacy Mode” in the app.
Step 8: Final Checks and Tips
Before you call the job done, run a few final tests.
Test the Live View
Open the app and check the live video feed. Is the image clear? Is the audio working? Adjust the camera angle if needed.
Test Motion Alerts
Walk in front of the camera to trigger a motion alert. Did you get a notification? Was the video recorded?
Test the Doorbell Button
Press the button and confirm the chime rings and you get a notification.
Check Wi-Fi Signal
Weak Wi-Fi can cause lag or disconnections. If the signal is poor, consider a Wi-Fi extender near your front door.
Secure the Installation
Make sure all screws are tight and the camera is firmly mounted. A loose camera can fall or get stolen.
Troubleshooting Common Issues
Even with careful installation, problems can happen. Here’s how to fix the most common ones.
Camera Won’t Power On
- Check the breaker—is it really on?
- Test the voltage at the doorbell—should be 16–24V AC.
- Inspect wires—are they connected properly?
- Try the chime connector if included.
Wi-Fi Connection Fails
- Ensure you’re using 2.4 GHz Wi-Fi.
- Move your router closer or use a Wi-Fi extender.
- Restart your router and camera.
- Reset the camera and re-pair it.
Blurry or Dark Video
- Clean the camera lens with a soft cloth.
- Adjust the camera angle to avoid direct sunlight or glare.
- Check night vision—ensure IR LEDs aren’t blocked.
No Chime Sound
- Your chime may not be compatible with smart doorbells.
- Install the chime connector inside the chime box.
- Use a plug-in wireless chime as an alternative.
False Motion Alerts
- Lower motion sensitivity in the app.
- Adjust motion zones to exclude busy areas.
- Trim bushes or trees that sway in the wind.
App Won’t Connect
- Restart the app and your phone.
- Ensure your phone is on the same Wi-Fi network.
- Reset the camera by holding the setup button for 10 seconds.
Maintenance and Long-Term Care
To keep your Akaso doorbell camera working smoothly:
- Clean the lens monthly with a microfiber cloth.
- Check for firmware updates in the app.
- Test the doorbell and alerts every few months.
- Replace the battery if your model is battery-powered (most Akaso wired models don’t have batteries).
- Inspect wires and mounting during seasonal home checks.
Conclusion: Enjoy Your Smart Doorbell
Congratulations! You’ve successfully learned how to install doorbell camera Akaso and set it up for optimal performance. From turning off the power to configuring motion zones, you’ve completed every step with confidence.
Your Akaso doorbell camera now provides 24/7 surveillance, instant alerts, and two-way communication—giving you peace of mind whether you’re home or away. It’s a simple upgrade that makes a big difference in home security.
Remember, if you run into issues, the troubleshooting tips in this guide can help. And if all else fails, contact Akaso customer support or consult a licensed electrician.
Enjoy your new smart doorbell, and stay safe!