Installing the Ring Pro Doorbell is easier than you think—even if you’re not a DIY expert. This guide walks you through every step, from checking compatibility to final app setup, ensuring a secure and reliable smart doorbell experience.
Key Takeaways
- Check compatibility first: The Ring Pro requires a transformer with 16–24V AC and existing doorbell wiring to function properly.
- Turn off power before installing: Always shut off electricity at the breaker to avoid shocks or damage to the device.
- Use the mounting bracket correctly: The angled bracket helps position the doorbell for optimal motion detection and video quality.
- Connect wires securely: Loose connections can cause power issues or prevent the doorbell from working.
- Complete setup via the Ring app: Download the app, scan the QR code, and follow prompts to connect to Wi-Fi and customize settings.
- Test after installation: Verify video, motion alerts, and chime functionality to ensure everything works as expected.
- Use Ring Chime Pro for better range: If your Wi-Fi signal is weak near the door, the Chime Pro extends coverage and acts as a plug-in chime.
How to Install the Ring Pro Doorbell
Upgrading your home security with the Ring Pro Doorbell is a smart move. This sleek, hardwired smart doorbell offers 1080p HD video, advanced motion detection, two-way audio, and customizable motion zones—all designed to keep your home safe and give you peace of mind. But before you can enjoy these features, you need to install it properly.
Don’t worry—this guide will walk you through the entire process, from checking your doorbell’s compatibility to finalizing the setup in the Ring app. Whether you’re a seasoned DIYer or a first-time installer, we’ve broken it down into simple, easy-to-follow steps. By the end, you’ll have a fully functional Ring Pro Doorbell that keeps you connected to your front door from anywhere in the world.
What You’ll Need Before You Start
Visual guide about How to Install the Ring Pro Doorbell
Image source: i.pinimg.com
Before you begin, gather all the tools and materials you’ll need. Having everything ready will make the installation smoother and faster.
You’ll need:
- The Ring Pro Doorbell (included in the box)
- Existing doorbell wiring (required)
- A compatible transformer (16–24V AC, 30VA or higher)
- Phillips-head screwdriver
- Drill and drill bits (if mounting on brick, stucco, or concrete)
- Level (to ensure the doorbell is straight)
- Smartphone or tablet with the Ring app installed
- Wi-Fi network (2.4 GHz or 5 GHz)
- Optional: Ring Chime Pro (for better Wi-Fi range and indoor chime)
It’s also helpful to have a helper nearby, especially if you’re working at height or need an extra hand holding the doorbell during wiring.
Step 1: Check Compatibility
Not all doorbells are compatible with the Ring Pro. Before you start, make sure your current setup meets the requirements.
Check Your Existing Doorbell Wiring
The Ring Pro is a hardwired device, meaning it needs to be connected to your home’s existing doorbell wires. If you don’t have wires running to your doorbell, the Ring Pro won’t work. You’ll need at least two wires connected to your current doorbell button.
To check:
- Remove your existing doorbell button by unscrewing it from the wall.
- Look for two wires connected to the back. If you see them, you’re good to go.
- If there are no wires or only one, the Ring Pro isn’t compatible unless you run new wiring (which is complex and may require an electrician).
Check Your Transformer Voltage
The Ring Pro requires a transformer that outputs between 16 and 24 volts AC (alternating current) and at least 30VA (volt-amperes). Most older doorbells use 8–16V, which is too low.
To check your transformer:
- Locate your doorbell transformer. It’s usually near your doorbell chime inside the house, often in a basement, garage, or utility closet.
- Look for a label that shows the voltage and VA rating. If it says 16V or higher and 30VA or more, you’re set.
- If it’s lower, you may need to upgrade the transformer. Ring sells a compatible transformer, or you can hire an electrician.
Check Wi-Fi Signal Strength
The Ring Pro needs a strong Wi-Fi connection to stream video and send alerts. Use the Ring app’s “Wi-Fi Signal Strength” tool to test the signal at your door.
To test:
- Open the Ring app on your phone.
- Go to Devices > Add Device > Doorbells > Ring Video Doorbell Pro.
- Follow the prompts until you reach the Wi-Fi signal test.
- Hold your phone where you plan to install the doorbell and let the app measure the signal.
- If the signal is weak, consider installing a Ring Chime Pro, which acts as a Wi-Fi extender.
Step 2: Turn Off the Power
Safety first! Working with electrical wiring can be dangerous if the power is on.
Locate Your Circuit Breaker
Find the breaker that controls your doorbell. It’s often labeled “doorbell,” “chime,” or “front door.” If you’re unsure, turn off the main breaker to be safe.
Turn Off the Power
Switch the breaker to the “off” position. To double-check, press your existing doorbell button. If the chime doesn’t sound, the power is off.
Use a Voltage Tester (Optional but Recommended)
If you have a non-contact voltage tester, touch it to the wires at the doorbell to confirm no electricity is flowing.
Never skip this step—even low-voltage doorbell circuits can cause shocks or damage your Ring Pro.
Step 3: Remove Your Old Doorbell
Now it’s time to remove your existing doorbell button.
Unscrew the Old Button
Use a Phillips-head screwdriver to remove the two screws holding your current doorbell in place. Gently pull the button away from the wall.
Disconnect the Wires
You’ll see two wires connected to the back. Loosen the screws holding them and carefully remove the wires. Don’t let them fall back into the wall—tape them to the side or hold them with a helper.
Inspect the Wires
Check that the wires aren’t frayed or damaged. If they are, trim the ends with wire strippers and expose fresh copper.
Step 4: Install the Mounting Bracket
The Ring Pro comes with a mounting bracket that helps secure the doorbell and allows for angled positioning.
Choose the Right Bracket
The box includes a flat bracket and an angled bracket (15° or 30°). Use the angled one if your doorbell is on a corner or if you want better coverage of your walkway.
Position the Bracket
Hold the bracket against the wall where you want to install the doorbell. Use a level to make sure it’s straight. Mark the screw holes with a pencil.
Drill Pilot Holes (If Needed)
If you’re mounting on brick, stucco, or concrete, drill pilot holes using a masonry bit. For wood or siding, you can screw directly into the wall.
Secure the Bracket
Use the included screws to attach the bracket to the wall. Make sure it’s tight and level.
Step 5: Connect the Wires
Now it’s time to connect your doorbell wires to the Ring Pro.
Prepare the Wires
Strip about 1/4 inch of insulation from the ends of the two wires if needed. Twist the exposed copper to keep it neat.
Attach the Wires to the Ring Pro
The Ring Pro has two terminal screws on the back. Loosen them slightly, then insert one wire under each screw. Tighten the screws to secure the wires. It doesn’t matter which wire goes where—Ring Pro is not polarity-sensitive.
Use the Wire Nuts (Optional)
If your wires are too short or loose, use the included wire nuts to extend or secure them. Twist the wires together and cap them with the nut.
Secure the Doorbell to the Bracket
Slide the Ring Pro onto the mounting bracket until it clicks into place. The bracket has a locking mechanism—make sure it’s fully seated.
Step 6: Restore Power and Test
Once everything is connected, it’s time to turn the power back on and test the doorbell.
Turn the Breaker Back On
Go to your circuit breaker and switch the doorbell circuit back to “on.”
Check for Power
The Ring Pro should light up with a solid blue LED. If it doesn’t, double-check your wiring and transformer.
Test the Doorbell
Press the button on the Ring Pro. You should hear a chime inside (if your chime is compatible) and see a notification on your phone if the app is set up.
Step 7: Set Up the Ring App
The final step is configuring your Ring Pro through the Ring app.
Download the Ring App
If you haven’t already, download the Ring app from the App Store (iOS) or Google Play (Android). Create an account or log in.
Add Your Device
- Open the app and tap Set Up a Device.
- Select Doorbells, then Ring Video Doorbell Pro.
- Scan the QR code on the back of your doorbell or enter the serial number manually.
- Follow the on-screen instructions to connect to your Wi-Fi network.
Customize Settings
Once connected, you can:
- Set up motion zones to focus on specific areas (like your driveway or walkway).
- Adjust motion sensitivity to reduce false alerts.
- Enable two-way talk and live view.
- Set up linked devices, like a Ring Chime or smart lights.
Test Live View
Tap the live view button in the app to see the camera feed. Speak through the app to test two-way audio.
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix the most common ones.
Doorbell Won’t Power On
- Check that the breaker is on.
- Verify the transformer is 16–24V AC and 30VA or higher.
- Ensure wires are securely connected and not loose.
- Try swapping the wires—sometimes polarity matters with older chimes.
Weak Wi-Fi Signal
- Move your router closer to the door.
- Install a Ring Chime Pro to extend Wi-Fi range.
- Reduce interference by avoiding microwaves, cordless phones, or thick walls.
No Chime Sound
- Make sure your mechanical or digital chime is compatible (check Ring’s compatibility list).
- Adjust the chime settings in the Ring app under Device Settings > Chime Settings.
- If using a digital chime, enable “Digital Chime” in the app.
Blurry or Dark Video
- Clean the camera lens with a soft, dry cloth.
- Adjust the angle of the doorbell using the mounting bracket.
- Ensure the doorbell isn’t facing direct sunlight or bright lights at night.
Motion Alerts Not Working
- Check motion zones and sensitivity in the app.
- Make sure the doorbell is powered and connected to Wi-Fi.
- Test by walking in front of the doorbell to trigger motion.
Tips for a Successful Installation
To get the most out of your Ring Pro, keep these tips in mind:
- Install at chest height: Mount the doorbell about 48 inches from the ground for the best view of visitors.
- Angle for coverage: Use the angled bracket to point the camera toward your walkway or driveway.
- Use a weatherproof cover: If your doorbell is exposed to rain or snow, consider a Ring weatherproof cover.
- Update firmware regularly: The Ring app will notify you of updates—install them to improve performance and security.
- Enable end-to-end encryption: For added privacy, turn on end-to-end encryption in the app settings (requires a Ring Protect Plus plan).
Conclusion
Installing the Ring Pro Doorbell is a straightforward process that can significantly enhance your home security. By following this guide, you’ve ensured a safe, secure, and reliable setup—from checking compatibility and turning off the power to connecting wires and customizing settings in the app.
With features like HD video, two-way talk, and smart alerts, the Ring Pro keeps you connected to your home no matter where you are. Whether you’re watching for packages, greeting guests, or deterring intruders, your Ring Pro is now ready to protect what matters most.
Take a moment to test all features, adjust motion zones, and explore the app’s settings. And if you run into any issues, refer back to the troubleshooting section or contact Ring support for help.
Welcome to smarter home security—your front door just got a whole lot smarter.