How to Change Blink Doorbell Chime

This guide walks you through how to change your Blink doorbell chime using the app or physical chime unit. Whether you’re upgrading your sound or fixing a silent alert, we’ve got you covered with simple instructions and expert tips.

Key Takeaways

• Understand your chime options: Blink doorbells work with both the Blink Chime Pro and third-party mechanical or digital chimes.
• Use the Blink app for setup: Most chime changes are managed through the Blink mobile app under device settings.
• Check compatibility first: Not all chimes work with Blink systems—verify voltage and wiring before installation.
• Test after every change: Always test the chime after adjusting settings to ensure it’s working properly.
• Troubleshoot common issues: Silent chimes, delayed alerts, or no sound can often be fixed with simple steps like checking Wi-Fi or power.
• Customize alert sounds: With the Chime Pro, you can choose from multiple tones and adjust volume levels.
• Keep firmware updated: Regular updates improve performance and add new features to your Blink system.

How to Change Blink Doorbell Chime: A Complete Step-by-Step Guide

So, your Blink doorbell isn’t making the sound you want—or maybe it’s not making any sound at all. Don’t worry! Changing your Blink doorbell chime is easier than you think. Whether you’re using the official Blink Chime Pro or a traditional wired chime, this guide will walk you through every step to get your doorbell ringing just right.

In this comprehensive how-to, you’ll learn how to change your Blink doorbell chime using the Blink app, connect it to different chime types, customize alert sounds, and troubleshoot common problems. By the end, you’ll have a doorbell that not only alerts you when someone’s at the door but does so with the perfect tone and volume for your home.

Understanding Your Blink Doorbell Chime Options

Before diving into the steps, it’s important to understand how Blink doorbells handle chimes. Unlike traditional wired doorbells that connect directly to a chime inside your home, Blink doorbells are wireless and rely on either a Chime Pro device or integration with existing mechanical/digital chimes through your home’s wiring.

There are two main ways your Blink doorbell can produce a chime:

• Blink Chime Pro: A standalone plug-in device that connects to your Wi-Fi and produces a customizable chime sound when the doorbell is pressed.
• Existing Wired Chime: If your home has a traditional doorbell chime wired to your doorbell circuit, the Blink Sync Module 2 can trigger it when motion is detected or the button is pressed.

Knowing which setup you have (or want) will determine the steps you follow. Most users prefer the Chime Pro for its flexibility and ease of use, especially in homes without existing doorbell wiring.

How to Change the Chime Using the Blink Chime Pro

If you’re using the Blink Chime Pro, changing the chime is as simple as adjusting settings in the Blink app. The Chime Pro offers multiple tones, volume levels, and even the ability to set different chimes for different events (like motion vs. button press).

Step 1: Open the Blink App

Launch the Blink app on your smartphone or tablet. Make sure you’re logged into the account linked to your Blink system. If you have multiple systems, select the one that includes your doorbell and Chime Pro.

Step 2: Navigate to Device Settings

Tap on the “Devices” tab at the bottom of the screen. Find your Blink Video Doorbell in the list and tap on it to open its settings.

Step 3: Select “Chime Settings”

Scroll down until you see the “Chime Settings” option. Tap on it to access your Chime Pro configuration.

Step 4: Choose Your Chime Sound

You’ll see a list of available chime tones. These may include options like “Classic Ding,” “Modern Beep,” “Gentle Chime,” or “Loud Alert.” Tap on the one you prefer. Some tones are designed to be subtle, while others are louder and more attention-grabbing—ideal for larger homes or noisy environments.

Step 5: Adjust the Volume

Below the tone selection, you’ll find a volume slider. Drag it left to lower the volume or right to increase it. We recommend testing at medium volume first, then adjusting based on your home’s acoustics.

Step 6: Set Chime Triggers

Here’s a great feature: you can choose whether the chime sounds for doorbell presses only, motion alerts only, or both. For most users, enabling both ensures you never miss a visitor. However, if you get frequent motion alerts (like from pets or passing cars), you might want to disable the chime for motion to reduce noise.

Step 7: Save and Test

Once you’ve made your selections, tap “Save” at the top right. Then, press the button on your Blink doorbell (or simulate a press in the app) to test the new chime. Listen carefully—does it sound clear? Is it loud enough? If not, go back and tweak the settings.

Pro Tip: If you have multiple Chime Pro units (e.g., one upstairs and one downstairs), you can assign different tones or volumes to each for better zone awareness.

How to Connect Blink Doorbell to an Existing Wired Chime

If your home already has a wired doorbell chime, you can integrate your Blink doorbell with it using the Blink Sync Module 2. This method is ideal if you prefer the classic “ding-dong” sound or don’t want to rely on a plug-in device.

Step 1: Check Compatibility

Not all chimes work with Blink systems. Your existing chime must be compatible with low-voltage doorbell circuits (typically 8–24V AC). Most mechanical chimes (the ones with two bells and a clapper) are compatible, but some digital or smart chimes may not respond properly.

To check, look at the label on your existing chime or consult your doorbell transformer. If you’re unsure, contact Blink support or refer to their compatibility list online.

Step 2: Turn Off Power

Safety first! Before touching any wires, turn off the power to your doorbell at the circuit breaker. Use a non-contact voltage tester to confirm the wires are not live.

Step 3: Remove the Old Doorbell

Unscrew and remove your existing doorbell button from the wall. Disconnect the two wires (usually labeled “Front” and “Trans”) and cap them with wire nuts for safety.

Step 4: Install the Blink Doorbell

Mount your Blink doorbell in the same location using the included mounting plate and screws. Connect the two wires to the terminals on the back of the Blink doorbell (polarity doesn’t matter). Secure the doorbell to the plate.

Step 5: Connect the Sync Module 2

The Sync Module 2 acts as the bridge between your wireless doorbell and the wired chime. It should be installed inside your home, near the existing chime unit.

• Open the chime cover and locate the two terminals where the doorbell wires connect.
• Disconnect those wires and connect them to the “Chime” terminals on the Sync Module 2.
• Connect two new wires from the “Doorbell” terminals on the Sync Module 2 back to the original chime terminals.
• Plug the Sync Module 2 into a nearby power outlet.

Step 6: Pair the Devices in the App

Open the Blink app and go to “Add Device”. Follow the prompts to add your Sync Module 2. Once connected, the app will detect your doorbell and chime setup.

Step 7: Test the Chime

Press the doorbell button. You should hear your existing chime sound. If not, double-check wiring connections and ensure the Sync Module 2 has power.

Pro Tip: If your chime doesn’t sound, try adjusting the “Chime Duration” setting in the app. Some chimes need a longer signal to activate.

How to Change Chime Settings for Multiple Doorbells

If you have more than one Blink doorbell (e.g., front door, back door, gate), you can assign different chime sounds or behaviors to each. This helps you instantly know which door someone is at.

Step 1: Assign Unique Names

In the Blink app, go to each doorbell’s settings and give it a unique name like “Front Door” or “Back Porch.” This makes it easier to manage individually.

Step 2: Customize Chime per Device

For each doorbell, go to “Chime Settings” and choose a distinct tone. For example, use a soft chime for the front door and a louder one for the back. You can also set different volumes or disable motion chimes for less-used entrances.

Step 3: Use Chime Pro Zones (Optional)

If you have multiple Chime Pro units, place one near each doorbell zone. Then, in the app, assign each doorbell to trigger only its nearest Chime Pro. This creates a localized alert system.

Pro Tip: Use this feature during holidays or parties—set a festive chime for the front door and a quiet one for the side entrance to avoid disturbing guests.

Troubleshooting Common Chime Issues

Even with perfect setup, chime problems can happen. Here’s how to fix the most common issues.

Chime Doesn’t Sound at All

• Check power: Ensure the Chime Pro is plugged in or the Sync Module 2 has power.
• Verify Wi-Fi: The Chime Pro needs a stable Wi-Fi connection. Move it closer to your router if needed.
• Test in app: Use the “Test Chime” feature in the Blink app to see if the issue is with the doorbell or the chime itself.
• Restart devices: Power-cycle the Chime Pro or Sync Module 2 by unplugging for 10 seconds.

Chime Sounds Weak or Distorted

• Adjust volume: Increase the volume in the app or move the Chime Pro to a better location (away from walls or furniture that block sound).
• Check for interference: Other electronic devices (like microwaves or cordless phones) can interfere with the signal. Relocate the Chime Pro if needed.

Delayed Chime or Missed Alerts

• Improve Wi-Fi signal: Use a Wi-Fi extender if your doorbell or Chime Pro is far from the router.
• Update firmware: Go to “System Settings” > “Firmware” and check for updates.
• Reduce motion sensitivity: High sensitivity can cause false alerts. Lower it in the doorbell settings.

Chime Sounds for Motion but Not Button Press

• Check trigger settings: In “Chime Settings,” make sure “Button Press” is enabled.
• Test button: Press the doorbell firmly—sometimes a weak press doesn’t register.
• Re-pair device: Remove and re-add the doorbell in the app to reset the connection.

Existing Wired Chime Not Working

• Verify wiring: Double-check all connections at the chime and Sync Module 2.
• Test transformer: Use a multimeter to ensure the doorbell transformer is outputting 8–24V AC.
• Try a different chime: If possible, test with a known-working chime to rule out hardware issues.

Tips for Getting the Most Out of Your Blink Chime

Now that your chime is working, here are some expert tips to enhance your experience:

• Use silent hours: In the app, set “Do Not Disturb” times when you don’t want chimes (e.g., during naps or late at night).
• Pair with smart lights: Use IFTTT or Alexa routines to flash lights when the doorbell chimes—great for hearing-impaired users.
• Keep firmware updated: Blink regularly releases updates that improve performance and add features. Enable auto-updates in the app.
• Clean the doorbell: Dust and debris can affect the button’s responsiveness. Wipe it gently with a dry cloth monthly.
• Monitor battery life: If using battery-powered doorbells, check battery levels in the app and replace them before they die.

Conclusion

Changing your Blink doorbell chime doesn’t have to be complicated. Whether you’re using the flexible Chime Pro or integrating with a traditional wired chime, the process is straightforward with the right guidance. By following the steps in this guide, you can customize your alert sounds, improve reliability, and ensure you never miss a visitor again.

Remember to test your chime after every change, keep your devices updated, and don’t hesitate to troubleshoot if something goes wrong. With a little patience and the tips shared here, your Blink doorbell will deliver the perfect chime—every time.

Now go ahead, press that button, and enjoy the sound of security done right.