Adjusting the volume on your Ring 2 doorbell is simple and essential for hearing alerts clearly. This guide walks you through every method—from the Ring app to physical speaker settings—so you never miss a visitor again.
Key Takeaways
- Use the Ring app to control chime volume: The primary way to adjust Ring 2 volume is through the mobile app’s device settings.
- Check your smartphone’s media volume: App notifications rely on your phone’s volume settings—make sure they’re turned up.
- Enable or disable the built-in speaker: You can mute the doorbell’s internal speaker if using a Ring Chime or Chime Pro.
- Update firmware for optimal performance: Outdated software can cause audio issues—keep your device updated.
- Test volume after adjustments: Always trigger a test ring to confirm your changes worked.
- Troubleshoot low volume with placement and Wi-Fi: Poor signal or obstructed speakers can reduce sound quality.
- Use a Ring Chime for louder alerts: For homes where the doorbell speaker isn’t loud enough, a Chime adds indoor audio alerts.
How to Adjust Volume of Ring 2 Doorbell: A Complete Step-by-Step Guide
Your Ring 2 doorbell is more than just a camera—it’s your home’s first line of defense and a convenient way to greet visitors, deliveries, and unexpected guests. But what happens when the chime is too quiet to hear from the kitchen, or so loud it startles your pets? Knowing how to adjust the volume of your Ring 2 doorbell ensures you’re always alerted without unnecessary noise.
In this comprehensive guide, we’ll walk you through every method to control your Ring 2’s volume—from the Ring mobile app to physical settings and troubleshooting tips. Whether you’re a new Ring user or just need a refresher, you’ll learn how to fine-tune your doorbell’s audio for the perfect balance of clarity and comfort. We’ll also cover common issues like low volume, delayed alerts, and how to use accessories like the Ring Chime to boost sound. By the end, you’ll have full control over your doorbell’s audio experience.
Understanding Your Ring 2 Doorbell’s Audio Features
Before diving into volume adjustments, it’s important to understand how the Ring 2 handles sound. Unlike traditional doorbells that rely solely on a wired chime inside your home, the Ring 2 uses a combination of its built-in speaker and optional accessories to deliver audio alerts.
Visual guide about How to Adjust Volume of Ring 2 Doorbell
Image source: lifewire.com
The Ring 2 doorbell has a small internal speaker that plays a chime when someone presses the button. This speaker is useful for outdoor notifications—letting you know someone is at the door even if you’re in the backyard. However, the volume is limited, especially in noisy environments or larger homes.
For indoor alerts, Ring relies on push notifications sent to your smartphone, tablet, or paired devices like the Ring Chime or Chime Pro. These notifications play a sound through your device’s speaker, and their volume depends on your phone’s settings. Additionally, if you’ve connected a Ring Chime, it will play a louder, customizable chime inside your home—ideal for hearing alerts from another room.
Understanding these layers of audio delivery is key to adjusting volume effectively. You’re not just controlling one sound source—you’re managing multiple systems working together. That’s why adjusting volume on the Ring 2 often involves changes in both the app and your device settings.
Method 1: Adjusting Volume via the Ring Mobile App
The most direct and user-friendly way to adjust your Ring 2 doorbell’s volume is through the Ring mobile app. This method gives you control over both the doorbell’s built-in speaker and notification settings. Here’s how to do it step by step.
Step 1: Open the Ring App
Launch the Ring app on your smartphone or tablet. Make sure you’re logged into the account linked to your Ring 2 doorbell. If you have multiple Ring devices, ensure you’re viewing the correct one.
Step 2: Select Your Ring 2 Doorbell
On the home screen, tap the device icon for your Ring 2 doorbell. This will open the live view or device dashboard, depending on your app version.
Step 3: Access Device Settings
Look for the gear icon (⚙️) in the top-right corner of the screen and tap it. This opens the device settings menu, where you can adjust various features including motion detection, video quality, and audio.
Step 4: Find the Audio Settings
Scroll down until you see the “Audio” or “Sound” section. Tap on it to expand the options. Here, you’ll find settings for the doorbell chime volume and notification sounds.
Step 5: Adjust the Chime Volume
You’ll see a slider labeled “Chime Volume” or “Doorbell Volume.” Drag the slider to increase or decrease the volume of the built-in speaker on your Ring 2. The scale typically ranges from 0 (mute) to 10 (maximum).
Tip: Start with a mid-level volume (around 5 or 6) and test it by pressing the doorbell button. Adjust up or down based on how well you can hear it from different areas of your home or yard.
Step 6: Save Your Changes
The app usually saves changes automatically, but if you see a “Save” or “Apply” button, tap it to confirm. Exit the settings menu and return to the home screen.
This method gives you precise control over the doorbell’s speaker volume. However, remember that the Ring 2’s internal speaker has physical limits—it may not be loud enough for large homes or noisy environments. That’s where additional accessories come in handy.
Method 2: Adjusting Smartphone Notification Volume
Since the Ring app sends push notifications to your phone, the volume of these alerts depends on your device’s media or notification volume—not the app itself. If you’re not hearing doorbell alerts, your phone’s volume might be too low or on silent.
Step 1: Check Your Phone’s Volume Settings
On an iPhone, use the physical volume buttons on the side of the device to increase the media volume. Make sure the ring/silent switch (the small toggle on the left) is not set to silent (red dot showing).
On Android, press the volume up button and ensure “Media” or “Notifications” volume is turned up. You can also go to Settings > Sound > Volume and adjust the notification slider.
Step 2: Enable Ring Notifications
Open your phone’s Settings app and go to Notifications (or Apps & Notifications). Find the Ring app in the list and make sure notifications are enabled. Allow “Sounds” and “Banners” for real-time alerts.
Step 3: Test the Notification
Ask someone to press your doorbell or use the “Test Chime” feature in the Ring app (found in Device Settings > Audio). Listen for the notification sound on your phone.
Pro Tip: If you use Do Not Disturb mode, add the Ring app to your allowed exceptions so you still receive doorbell alerts even when the phone is silenced.
Adjusting your phone’s volume ensures you hear alerts no matter where you are in the house—especially if you’re not near the doorbell itself.
Method 3: Using a Ring Chime or Chime Pro for Louder Alerts
If the Ring 2’s built-in speaker isn’t loud enough, or you want chimes to play inside your home, a Ring Chime or Chime Pro is the perfect solution. These devices plug into any standard electrical outlet and play customizable sounds when your doorbell is pressed.
Step 1: Purchase and Set Up a Ring Chime
Buy a Ring Chime or Chime Pro from the Ring website or a retailer like Amazon. The Chime Pro also acts as a Wi-Fi extender, boosting your doorbell’s signal—ideal for homes with weak connectivity.
Step 2: Plug In the Chime
Insert the Chime into an outlet near where you want to hear alerts—like the living room, kitchen, or bedroom. Avoid outlets behind furniture or in enclosed spaces that muffle sound.
Step 3: Connect to the Ring App
Open the Ring app and tap the menu (☰) > Devices > Add Device > Chime. Follow the on-screen instructions to pair the Chime with your Ring 2 doorbell. The app will guide you through Wi-Fi setup and naming the device.
Step 4: Adjust Chime Volume and Sound
Once connected, go to the Chime’s settings in the app. You’ll find a volume slider and a list of chime sounds (e.g., classic ding-dong, modern beep, festive melodies). Choose your preferred sound and set the volume to a comfortable level.
Example: If you have a large home, place one Chime downstairs and another upstairs. Set different sounds for each so you know which floor the alert is coming from.
Using a Chime not only increases volume but also adds flexibility—you can customize sounds for different doors or events (e.g., front door vs. back door).
Method 4: Muting the Doorbell Speaker (When Using a Chime)
If you’re using a Ring Chime and don’t want the doorbell’s built-in speaker to play simultaneously, you can mute it to avoid echo or confusion. This is especially useful if the outdoor chime is too loud or unnecessary.
Step 1: Open the Ring App
Go to your Ring 2 device settings as described earlier.
Step 2: Navigate to Audio Settings
Tap the “Audio” section and look for the “Chime Volume” slider.
Step 3: Set Volume to Zero
Drag the slider all the way to the left (0) to mute the doorbell’s speaker. This disables the outdoor chime while keeping the Chime active indoors.
Note: Muting the doorbell speaker won’t affect motion alerts or live view audio—only the sound when the button is pressed.
This setup creates a cleaner audio experience, especially in quiet neighborhoods where outdoor chimes might disturb others.
Troubleshooting Low or No Volume on Ring 2
Even after adjusting settings, you might still experience low volume or no sound at all. Here are common causes and fixes.
Issue 1: Weak Wi-Fi Signal
A poor connection can delay or mute notifications. Check your Ring 2’s signal strength in the app under Device Health. If it shows “Poor” or “Fair,” consider moving your router closer or using a Wi-Fi extender like the Ring Chime Pro.
Issue 2: Obstructed Speaker
Dirt, paint, or mounting angle can block the doorbell’s speaker. Clean the front panel gently with a soft, dry cloth. Ensure the doorbell isn’t mounted too close to a wall or under a deep overhang that muffles sound.
Issue 3: Outdated Firmware
Ring regularly releases updates to improve performance. Go to Device Settings > Device Health > Firmware Version. If an update is available, install it. This can resolve audio bugs and improve volume consistency.
Issue 4: Phone in Do Not Disturb or Silent Mode
Double-check that your phone isn’t silencing notifications. On iPhone, swipe down for Control Center and ensure Do Not Disturb is off. On Android, check the notification panel for silent mode icons.
Issue 5: App Permissions Disabled
If the Ring app can’t access your microphone or notifications, audio alerts may fail. Go to your phone’s Settings > Apps > Ring > Permissions and enable Microphone, Notifications, and Background App Refresh.
Testing after each fix helps identify the root cause. Use the “Test Chime” feature in the app to verify audio output.
Best Practices for Optimal Volume Control
To get the most out of your Ring 2’s audio system, follow these expert tips:
- Test volume in different areas: Walk around your home and yard to ensure you can hear alerts from key locations like the bedroom, garage, or backyard.
- Use multiple Chimes for large homes: Place Chimes in central areas or on different floors for consistent coverage.
- Choose distinct chime sounds: Assign unique tones to different doors or devices to quickly identify the source of an alert.
- Adjust volume seasonally: In winter, when windows are closed, you may need lower volume. In summer, with windows open, increase it to hear over outdoor noise.
- Regularly clean the doorbell: Dust and debris can accumulate on the speaker grill, reducing sound quality. Clean it monthly.
- Keep the app updated: New versions often include audio improvements and bug fixes.
By combining app settings, phone adjustments, and smart accessories, you can create a personalized audio experience that fits your lifestyle and home layout.
Conclusion
Adjusting the volume of your Ring 2 doorbell doesn’t have to be complicated. With the Ring app, your smartphone settings, and optional accessories like the Ring Chime, you have multiple tools to ensure you never miss a visitor. Whether you need a gentle chime for a quiet home or a loud alert for a busy household, the right volume settings make all the difference.
Start by using the app to control the doorbell’s speaker, then fine-tune your phone’s notification volume. For louder or more flexible alerts, add a Ring Chime. And if you run into issues, remember to check Wi-Fi, clean the speaker, and keep your firmware updated. With these steps, your Ring 2 will deliver clear, reliable audio exactly when and how you need it.
Now that you know how to adjust the volume of your Ring 2 doorbell, take a few minutes to test and customize your settings. A well-tuned doorbell doesn’t just improve convenience—it enhances your home’s security and peace of mind.