This guide walks you through attaching your Blink doorbell to its mount safely and correctly. Whether you’re replacing an old doorbell or installing a new one, we cover every step—from tools to troubleshooting—to ensure a secure, long-lasting setup.
Key Takeaways
- Choose the right mount: Blink offers standard and wedge mounts for different angles and surfaces. Pick the one that fits your door frame and viewing needs.
- Turn off power first: Always shut off electricity at the breaker before working near existing doorbell wiring to avoid shocks.
- Use the correct tools: A screwdriver, drill (if needed), level, and measuring tape ensure a clean, secure installation.
- Secure the mount tightly: Loose mounts cause poor video quality and device instability. Tighten all screws and check alignment.
- Test before finalizing: Power on and test the doorbell’s view and motion detection before finishing the setup.
- Adjust angle for best view: Use the wedge mount or tilt the standard mount to avoid glare and capture visitors clearly.
- Maintain regularly: Check screws and clean the lens every few months to keep your Blink doorbell working perfectly.
How to Attach Blink Doorbell to Mount: A Complete Step-by-Step Guide
So, you’ve got your new Blink doorbell—congratulations! You’re about to upgrade your home security with motion alerts, HD video, and two-way audio. But before you can start seeing who’s at your door, you need to attach it properly to the mount. Don’t worry—it’s easier than it looks.
In this guide, we’ll walk you through how to attach Blink doorbell to mount safely and correctly. Whether you’re replacing an old wired doorbell or installing a completely new system, we’ve got you covered. We’ll explain the tools you need, how to position the mount, and how to secure everything so your doorbell stays put through rain, wind, and daily use.
By the end of this guide, you’ll have a securely mounted Blink doorbell that gives you a clear view of your doorstep—no wobbles, no slips, no guesswork.
What You’ll Need Before You Start
Before you begin, gather these tools and materials. Having everything ready saves time and prevents frustration.
- Blink doorbell kit: This includes the doorbell unit, mounting plate (standard or wedge), screws, and anchors.
- Screwdriver: A Phillips head screwdriver is usually enough, but a power drill with a screw bit can speed things up.
- Drill (optional): Useful if you’re mounting into brick, concrete, or hard siding.
- Measuring tape: Helps you center the mount and measure height.
- Level: Ensures your doorbell isn’t crooked—important for a clean look and proper camera angle.
- Pencil: For marking screw holes.
- Safety gear: Gloves and safety glasses, especially if drilling.
- Smartphone or tablet: To test the doorbell and check the camera view via the Blink app.
If you’re replacing an existing doorbell, you may also need wire strippers and electrical tape. But don’t worry—we’ll cover that too.
Step 1: Choose the Right Mount for Your Doorbell
Blink offers two main mounting options: the standard mount and the wedge mount. Choosing the right one ensures your camera sees the best angle of your doorstep.
Standard Mount
The standard mount is flat and attaches directly to the wall. It’s ideal if your doorframe is straight and you want a straightforward, flush installation. Most users start with this one.
Visual guide about How to Attach Blink Doorbell to Mount
Image source: m.media-amazon.com
Wedge Mount
The wedge mount is angled (usually 15 or 30 degrees) to tilt the camera downward. This is perfect if your doorbell is mounted high up or if you want to avoid capturing too much sky or porch ceiling. It also helps reduce glare from sunlight.
Pro Tip: If your front door is recessed or you have a deep porch, the wedge mount can help aim the camera directly at visitors instead of capturing empty space.
Step 2: Turn Off Power (If Replacing a Wired Doorbell)
If you’re replacing an existing wired doorbell, safety comes first. Even though doorbell circuits are low voltage, it’s still smart to turn off the power.
Locate Your Breaker Box
Find your home’s electrical panel. Look for a breaker labeled “doorbell,” “chime,” or “HVAC.” If you can’t find it, turn off the main breaker to be safe.
Test the Power
After turning off the breaker, press your old doorbell button. If the chime doesn’t sound, the power is off. You can also use a non-contact voltage tester near the wires to confirm.
Important: Never assume the power is off. Always test it. A small shock won’t hurt, but it’s not worth the risk.
Step 3: Remove the Old Doorbell (If Applicable)
If you’re replacing an old doorbell, you’ll need to remove it first.
Unscrew the Old Unit
Use a screwdriver to remove the screws holding the old doorbell to the wall. Gently pull the unit away to expose the wires.
Disconnect the Wires
Loosen the terminal screws and carefully remove the wires. Don’t cut them—just disconnect. Wrap the bare ends with electrical tape to prevent short circuits.
Remove the Old Mount
Unscrew and remove the old mounting plate. Clean the area if there’s old paint or debris.
Tip: Take a photo of the wiring before disconnecting. It helps if you need to reconnect later.
Step 4: Position the Blink Mount
Now it’s time to place the Blink mount. Proper positioning ensures your camera sees the right area and stays secure.
Choose the Height
The ideal height for a doorbell is between 48 and 60 inches from the ground. This makes it easy to see visitors of all heights and avoids tampering.
Center It on the Doorframe
Use a measuring tape to find the center of your doorframe. Mark the spot lightly with a pencil.
Check the Angle
If using a wedge mount, decide which direction to tilt the camera. Most people angle it slightly downward to focus on the walkway.
Use a Level
Place the mount against the wall and use a level to make sure it’s straight. A crooked doorbell looks unprofessional and can affect the camera view.
Pro Tip: Hold the mount in place and look through the camera lens (if possible) to preview the view. Adjust until you’re happy with what it sees.
Step 5: Mark and Drill Pilot Holes
Once the mount is positioned, it’s time to secure it.
Mark the Screw Holes
Hold the mount firmly against the wall. Use a pencil to mark the centers of the screw holes through the mount’s slots.
Drill Pilot Holes (If Needed)
If you’re mounting into wood, you can often screw directly in. But for brick, concrete, or hard siding, drill pilot holes first. Use a drill bit slightly smaller than your screws.
Insert Wall Anchors (If Needed)
For drywall or hollow walls, insert plastic wall anchors into the pilot holes. This gives the screws something solid to grip.
Safety Note: Wear safety glasses when drilling. Dust and debris can fly into your eyes.
Step 6: Attach the Mount to the Wall
Now it’s time to secure the mount.
Align the Mount
Hold the mount over the pilot holes or anchors. Make sure it’s still level and centered.
Insert and Tighten Screws
Insert the screws through the mount and into the wall. Use a screwdriver or drill to tighten them—but don’t over-tighten. This can crack the mount or strip the screw holes.
Double-Check Stability
Gently wiggle the mount. It should feel solid. If it moves, loosen the screws slightly, adjust, and retighten.
Tip: If the mount feels loose, try using longer screws or switching to heavier-duty anchors.
Step 7: Connect the Wires (For Wired Installations)
If your Blink doorbell is wired, now’s the time to connect it.
Strip the Wire Ends
Use wire strippers to expose about 1/4 inch of copper on each wire. Be careful not to cut the wire.
Attach to the Mount
Most Blink mounts have two small terminals or clips. Insert the wires into the correct slots. Usually, it doesn’t matter which wire goes where—doorbell circuits are not polarized.
Secure the Connection
Tighten the terminal screws or press the clips closed. Make sure the wires are snug and won’t pull out.
Important: If you’re unsure about wiring, consult a professional. Incorrect wiring can damage your doorbell or chime.
Step 8: Attach the Blink Doorbell to the Mount
With the mount secure and wires connected, it’s time to attach the doorbell.
Align the Doorbell
Hold the Blink doorbell so the mounting slots on the back line up with the screws or clips on the mount.
Slide It Into Place
Gently slide the doorbell down or forward until it clicks or sits flush. You should feel it lock into position.
Secure with the Set Screw
Most Blink doorbells have a small set screw on the bottom or side. Use the included Allen wrench to tighten it. This prevents theft and keeps the doorbell from falling off.
Pro Tip: Don’t overtighten the set screw. Just snug it enough to hold the doorbell firmly.
Step 9: Restore Power and Test the Doorbell
Now that everything is installed, it’s time to test it.
Turn the Power Back On
Go to your breaker box and turn the power back on. Wait a few seconds for the system to reset.
Open the Blink App
Launch the Blink app on your phone. Make sure your doorbell is connected to Wi-Fi and appears in the app.
Check the Live View
Tap “Live View” to see what the camera is capturing. Walk to your front door and check if motion detection works.
Test the Doorbell Button
Press the button on the doorbell. You should hear a chime (if wired) and receive a notification on your phone.
Note: If you don’t get a notification, check your Wi-Fi signal and app settings.
Step 10: Adjust the Angle and Fine-Tune
Even after installation, you might need to tweak the angle.
Use the Wedge Mount
If you used a wedge mount, you can rotate it to change the camera angle. Loosen the screws slightly, adjust, and retighten.
Tilt the Standard Mount
Some standard mounts allow slight tilting. If yours does, adjust it now for the best view.
Avoid Glare and Obstructions
Make sure the camera isn’t pointing directly into the sun or at a reflective surface. Also, check that plants, mailboxes, or decorations don’t block the view.
Tip: Take a photo of the camera view from inside your home. This helps you see what the doorbell sees without going outside.
Troubleshooting Common Installation Issues
Even with careful installation, problems can happen. Here’s how to fix the most common ones.
Doorbell Won’t Stay Attached
If the doorbell keeps falling off, the set screw may be loose or the mount isn’t secure. Tighten the set screw and check that the mount screws are firmly in the wall. Use anchors if needed.
Poor Wi-Fi Signal
If the doorbell keeps disconnecting, it might be too far from your router. Try moving the router, using a Wi-Fi extender, or installing the doorbell closer to the house.
Blurry or Dark Video
This could be due to a dirty lens, poor lighting, or incorrect angle. Clean the lens with a microfiber cloth. Adjust the mount to avoid backlighting from the sun.
No Chime Sound (Wired Setup)
Check that the wires are connected properly and the power is on. Also, verify that your chime is compatible with the Blink doorbell. Some older chimes may not work.
Motion Detection Not Working
Make sure motion zones are set up in the app. Also, check that the doorbell isn’t pointed at a busy street or tree that triggers false alerts.
Maintenance Tips to Keep Your Blink Doorbell Secure
A well-installed doorbell still needs care. Follow these tips to keep it working smoothly.
- Clean the lens monthly: Use a soft, dry cloth to wipe away dust, dirt, and fingerprints.
- Check screws every few months: Weather and vibration can loosen screws. Tighten them if needed.
- Update the app and firmware: Blink releases updates that improve performance and security.
- Test the doorbell weekly: Press the button and check the live view to ensure everything’s working.
- Replace batteries (if wireless): If your model uses batteries, replace them once a year or when the app warns you.
Final Thoughts
Attaching your Blink doorbell to the mount might seem tricky at first, but with the right steps, it’s a quick and rewarding project. By choosing the right mount, positioning it correctly, and securing it tightly, you’ll have a reliable security device that keeps your home safe.
Remember: safety first, take your time, and test everything before calling it done. A well-mounted doorbell not only works better—it looks better too.
Now that you know how to attach Blink doorbell to mount, you’re ready to enjoy peace of mind every time someone approaches your door.