Changing the battery in your Ring One doorbell is simple and takes just a few minutes. This guide walks you through removing the old battery, installing a new one, and reattaching the doorbell securely. No tools or technical skills required—perfect for any homeowner.
Key Takeaways
- Turn off power at the breaker before starting: For safety, always disconnect power to your doorbell circuit to avoid electrical shock.
- Use only compatible rechargeable batteries: The Ring One doorbell works best with a 16V 10VA or higher AC transformer and a rechargeable lithium-ion battery (included).
- Handle the battery carefully: Avoid puncturing, crushing, or exposing the battery to extreme heat or water to prevent damage or fire risk.
- Reattach the doorbell securely: Make sure the mounting bracket clicks into place to prevent the device from falling or becoming misaligned.
- Check the Ring app for battery status: After replacement, open the Ring app to confirm the new battery is recognized and charging properly.
- Charge the battery fully before reinstalling: A full charge ensures optimal performance and longer battery life between replacements.
- Clean the doorbell during maintenance: Wipe the lens and sensors with a soft cloth to maintain video clarity and motion detection accuracy.
How to Change Battery in Ring One Doorbell: A Complete Step-by-Step Guide
If you own a Ring One doorbell, you already know how convenient it is to see who’s at your door—even when you’re not home. But like any smart device, it needs regular maintenance to keep working at its best. One of the most common tasks is changing the battery. Whether your doorbell is showing a low battery warning in the Ring app or it’s stopped responding altogether, replacing the battery is a quick and easy fix.
In this guide, we’ll walk you through the entire process of changing the battery in your Ring One doorbell. You’ll learn how to safely remove the old battery, install a new one, and get your doorbell back up and running in just a few minutes. No special tools or technical expertise required—just follow along, and you’ll have your smart doorbell working like new again.
Why Your Ring One Doorbell Battery Needs Replacing
Visual guide about How to Change Battery in Ring One Doorbell
Image source: images.ctfassets.net
The Ring One doorbell is powered by a rechargeable lithium-ion battery. Over time, this battery loses its ability to hold a full charge. You might notice that your doorbell’s video quality drops, motion alerts become less frequent, or the device shuts off unexpectedly. These are all signs that the battery is nearing the end of its life.
Most Ring One batteries last between 6 to 12 months, depending on usage. If your doorbell is in a high-traffic area or exposed to extreme temperatures, the battery may drain faster. Replacing it promptly ensures your doorbell stays online and continues to protect your home.
What You’ll Need
Before you begin, gather these items:
- A replacement rechargeable lithium-ion battery (compatible with Ring One)
- A small Phillips-head screwdriver (optional, for some mounting brackets)
- A soft, dry cloth
- Access to your home’s circuit breaker
- Your smartphone with the Ring app installed
Most Ring One doorbells come with a spare battery, but if you don’t have one, you can purchase a compatible replacement from Ring’s official website or authorized retailers. Avoid third-party batteries, as they may not meet safety standards or could void your warranty.
Step 1: Turn Off Power to the Doorbell
Safety first! Even though the Ring One doorbell runs on battery power, it’s still connected to your home’s electrical wiring. To avoid any risk of electric shock, turn off the power at the circuit breaker.
Locate Your Circuit Breaker
Go to your home’s main electrical panel. Look for the breaker labeled “Doorbell,” “Chime,” or something similar. If you’re unsure which one controls your doorbell, turn off the main breaker to be safe.
Test the Power
After turning off the breaker, press your doorbell button. If nothing happens, the power is off. You can also use a non-contact voltage tester near the doorbell wires to confirm there’s no current.
Why This Step Matters
Even though the doorbell operates on battery, the wiring can still carry a small amount of electricity. Turning off the power prevents accidental shocks and protects the internal components during battery replacement.
Step 2: Remove the Ring One Doorbell from the Mounting Bracket
Now that the power is off, it’s time to take the doorbell off the wall.
Locate the Release Tab
On the bottom edge of the Ring One doorbell, you’ll find a small plastic tab. This is the release mechanism that holds the device in place.
Press and Hold the Tab
Use your thumb to press and hold the release tab firmly. While holding it, gently pull the bottom of the doorbell away from the wall. The entire unit should slide downward and come free from the mounting bracket.
Handle with Care
Once removed, place the doorbell on a flat, stable surface. Avoid dropping it or exposing it to moisture. The lens and sensors are delicate, so handle the device by its sides.
Step 3: Open the Battery Compartment
With the doorbell removed, you can now access the battery.
Find the Battery Cover
On the back of the Ring One doorbell, you’ll see a small rectangular cover. This is the battery compartment.
Remove the Cover
Use your fingernail or a flat tool (like a butter knife or plastic spudger) to gently pry open the cover. It should pop off easily. Avoid using metal tools, as they can scratch the casing or damage the internal components.
Inspect the Battery
Once the cover is off, you’ll see the rechargeable lithium-ion battery inside. Take a moment to check its condition. If it’s swollen, leaking, or damaged, do not touch it with bare hands. Dispose of it properly at an electronics recycling center.
Step 4: Remove the Old Battery
Now it’s time to take out the old battery.
Disconnect the Battery Connector
The battery is connected to the doorbell via a small plastic connector. Gently pull the connector straight out. Do not yank or twist it—this could damage the wires.
Lift Out the Battery
Once disconnected, carefully lift the battery out of the compartment. It should slide out easily. Place it aside in a safe location until you can dispose of it properly.
Clean the Compartment (Optional)
While the battery is out, use a soft, dry cloth to wipe away any dust or debris from the battery compartment. This helps ensure a clean connection for the new battery.
Step 5: Install the New Battery
With the old battery removed, you’re ready to install the new one.
Check the New Battery
Before installing, inspect the new battery for any damage. Make sure it’s fully charged. If it’s not, plug it into the Ring charger (sold separately) for at least 4–6 hours.
Insert the Battery
Place the new battery into the compartment, aligning it with the guides. Make sure the connector end faces the correct direction.
Reconnect the Battery
Gently push the battery connector into the port on the doorbell. You should hear a soft click when it’s securely connected. Double-check that it’s fully seated.
Replace the Battery Cover
Snap the battery cover back into place. Make sure it’s flush with the back of the doorbell and doesn’t wobble.
Step 6: Reattach the Doorbell to the Wall
Now that the new battery is installed, it’s time to put the doorbell back on the wall.
Align the Mounting Bracket
Hold the doorbell so the top edge aligns with the mounting bracket on the wall. The bracket has a small hook that the doorbell slides onto.
Slide the Doorbell into Place
Gently slide the doorbell upward until it clicks into the bracket. You should feel it lock securely.
Test the Fit
Give the doorbell a light tug to make sure it’s firmly attached. If it moves or feels loose, remove it and reattach it carefully.
Step 7: Turn the Power Back On
With the doorbell reattached, restore power to the circuit.
Go Back to the Breaker Panel
Return to your electrical panel and turn the doorbell breaker back on. If you turned off the main breaker, turn it on now.
Wait for the Doorbell to Boot Up
It may take 30–60 seconds for the Ring One doorbell to power on and reconnect to your Wi-Fi network. The LED light on the front will flash blue during this process.
Test the Doorbell
Press the doorbell button to make sure it chimes and sends a notification to your phone. If everything works, you’re all set!
Step 8: Check the Battery Status in the Ring App
To confirm the new battery is working, open the Ring app on your smartphone.
Open the Ring App
Launch the app and log in if needed.
Select Your Doorbell
Tap on your Ring One doorbell from the device list.
Check the Battery Level
Go to Device Health or Settings. You should see the battery level displayed. If it shows 100%, the new battery is recognized and charging properly.
Update Firmware if Needed
While you’re in the app, check for any available firmware updates. Keeping your doorbell’s software up to date improves performance and security.
Tips for Extending Battery Life
Now that your Ring One doorbell has a fresh battery, here are some tips to make it last longer:
- Reduce Motion Sensitivity: In the Ring app, lower the motion sensitivity to reduce unnecessary recordings.
- Limit Live View Usage: Frequent live streaming drains the battery faster. Use it only when needed.
- Avoid Extreme Temperatures: Install your doorbell in a shaded area to prevent overheating in summer or freezing in winter.
- Clean the Lens Regularly: Dirt and debris can trigger false motion alerts. Wipe the lens weekly with a microfiber cloth.
- Use a Solar Charger (Optional): Ring offers a solar panel accessory that keeps the battery charged using sunlight.
Troubleshooting Common Issues
Even with a new battery, you might run into a few problems. Here’s how to fix them:
Doorbell Won’t Power On
If the doorbell doesn’t turn on after battery replacement:
- Double-check that the battery is properly connected.
- Ensure the battery is fully charged.
- Verify that the power is restored at the breaker.
- Try removing and reattaching the doorbell.
Low Battery Warning Still Appears
If the app still shows a low battery:
- The new battery may not be fully charged. Charge it for at least 6 hours.
- The battery might be defective. Try a different replacement.
- Reset the doorbell by holding the setup button for 20 seconds.
Doorbell Falls Off the Wall
If the doorbell keeps coming loose:
- Make sure the mounting bracket is securely screwed into the wall.
- Use the included security screw to lock the doorbell in place (if your model supports it).
- Consider using a stronger adhesive or wall anchor for brick or concrete surfaces.
No Notifications or Video
If you’re not receiving alerts:
- Check your Wi-Fi signal strength at the doorbell location.
- Ensure the doorbell is connected to the correct Wi-Fi network.
- Restart your router and the doorbell.
- Update the Ring app and doorbell firmware.
When to Replace the Battery Again
Most Ring One batteries last 6–12 months. To know when it’s time for another replacement:
- The Ring app shows a low battery warning.
- The doorbell shuts off unexpectedly.
- Video quality drops or motion alerts stop.
- The battery takes longer to charge or doesn’t hold a charge.
Keep a spare battery on hand so you’re never caught off guard.
Conclusion
Changing the battery in your Ring One doorbell is a simple task that anyone can do. By following this guide, you’ve learned how to safely remove the old battery, install a new one, and get your smart doorbell back online. Regular maintenance like this ensures your doorbell stays reliable and keeps your home secure.
Remember to turn off the power, handle the battery carefully, and check the Ring app after replacement. With these steps, you’ll extend the life of your doorbell and enjoy uninterrupted smart home protection.
Don’t wait until your doorbell stops working—stay ahead of the curve and replace the battery before it dies. Your future self will thank you!