Changing the WiFi network on your Aiwit doorbell is simple with the right steps. This guide walks you through disconnecting, reconnecting, and troubleshooting your device to ensure a smooth transition to a new network.
Key Takeaways
- Use the Aiwit app: The official app is the only reliable way to change your doorbell’s WiFi network—no physical buttons or manual resets required.
- Ensure 2.4 GHz network: Aiwit doorbells only work with 2.4 GHz WiFi bands; 5 GHz networks are not supported.
- Stay close during setup: Keep your phone and doorbell within 3–5 feet of the router for a strong signal during reconfiguration.
- Reset if needed: If the doorbell won’t connect, a factory reset may be necessary—follow the app instructions carefully.
- Check power source: Make sure your doorbell is fully charged or wired properly before starting the process.
- Update firmware: Always check for app and firmware updates to avoid compatibility issues.
- Test after setup: Verify motion detection, live view, and notifications work correctly on the new network.
How to Change WiFi Network on Aiwit Doorbell
If you’ve recently changed your internet provider, upgraded your router, or moved to a new home, you might need to update the WiFi network your Aiwit doorbell connects to. Unlike some smart devices that allow quick network switching via buttons or voice commands, the Aiwit doorbell requires a specific process through its companion app. Don’t worry—it’s straightforward once you know the steps.
In this comprehensive guide, you’ll learn exactly how to change the WiFi network on your Aiwit doorbell safely and efficiently. We’ll walk you through preparation, the step-by-step reconfiguration process, troubleshooting common issues, and tips to ensure your doorbell stays connected and functional. Whether you’re a tech novice or a seasoned smart home user, this guide is designed to make the process stress-free.
By the end, your Aiwit doorbell will be securely linked to your new WiFi network, ready to send alerts, stream video, and protect your home just like before—only now with better speed or coverage.
Why You Might Need to Change Your WiFi Network
Visual guide about How to Change Wifi Network on Aiwit Doorbell
Image source: safetywish.com
There are several common reasons why you’d want to update the WiFi network on your Aiwit doorbell:
- Moving to a new home: Your old network no longer exists, and your doorbell needs to connect to the new household’s WiFi.
- Router upgrade: You’ve installed a new router with a different network name (SSID) or password.
- Network optimization: You’ve split your network into separate 2.4 GHz and 5 GHz bands and want to ensure the doorbell connects to the correct one.
- Security concerns: You’ve changed your WiFi password for security reasons and need to update all connected devices.
- Improved signal strength: You’ve added a WiFi extender or mesh system and want your doorbell to use the stronger signal.
Regardless of your reason, the process remains the same. The key is to follow the steps carefully and avoid skipping any part of the setup.
What You’ll Need Before Starting
Before you begin changing the WiFi network on your Aiwit doorbell, gather the following:
- A smartphone or tablet: With the Aiwit app installed (available on iOS and Android).
- Your new WiFi network details: Including the network name (SSID) and password.
- Stable internet connection: Your phone should be connected to the new WiFi network you want the doorbell to use.
- Access to your doorbell: You’ll need to be near the doorbell during setup—ideally within 10 feet.
- Power source: Ensure the doorbell is charged (if battery-powered) or properly wired (if hardwired).
- Patience: The process may take 5–10 minutes, especially if troubleshooting is needed.
Having everything ready will prevent interruptions and reduce frustration during the setup.
Step 1: Open the Aiwit App and Log In
The Aiwit app is the central hub for managing your doorbell. It’s where you’ll initiate the WiFi change process.
Launch the App
Open the Aiwit app on your smartphone or tablet. If you don’t have it installed, download it from the Apple App Store (iOS) or Google Play Store (Android). Make sure you’re using the latest version—older versions may not support newer features or security protocols.
Log In to Your Account
Enter your registered email and password to log in. If you’ve forgotten your password, use the “Forgot Password” link to reset it. You must be logged in to access your device settings.
Select Your Doorbell
Once logged in, you’ll see a list of your connected devices. Tap on your Aiwit doorbell to open its control panel. If you have multiple devices, make sure you select the correct one.
Step 2: Access Device Settings
Now that you’re in the doorbell’s main screen, you need to navigate to the settings menu where the WiFi configuration options are located.
Tap the Settings Icon
Look for a gear or settings icon—usually in the top-right corner of the screen. Tap it to open the device settings menu.
Find “Network” or “WiFi Settings”
Scroll through the options until you find “Network,” “WiFi,” or “Connection Settings.” The exact wording may vary slightly depending on your app version.
Select “Change WiFi” or “Reconnect”
You should see an option like “Change WiFi Network” or “Reconnect to WiFi.” Tap it to begin the process. The app will now guide you through the steps to disconnect from the current network and connect to a new one.
Step 3: Put the Doorbell in Pairing Mode
To connect to a new network, your Aiwit doorbell must enter pairing mode. This allows it to broadcast a signal that the app can detect and use to send new WiFi credentials.
Follow On-Screen Instructions
The app will prompt you to put the doorbell into pairing mode. This usually involves pressing and holding a button on the device itself.
Locate the Reset/Pair Button
On most Aiwit doorbells, there’s a small reset or pair button on the back or side of the device. You may need a paperclip or SIM ejector tool to press it.
Press and Hold the Button
Press and hold the button for about 5–10 seconds until you hear a voice prompt (like “Waiting for connection”) or see a blinking light. This indicates the doorbell is in pairing mode and ready to receive new network information.
Wait for Confirmation
The app should detect the doorbell within 10–30 seconds. You’ll see a message like “Device found” or “Ready to connect.” If it doesn’t appear, try pressing the button again or move closer to the doorbell.
Step 4: Connect to the New WiFi Network
Now that your doorbell is in pairing mode, it’s time to send it the new WiFi details.
Select Your New Network
The app will scan for available WiFi networks. Choose the one you want your doorbell to connect to. Make sure it’s a 2.4 GHz network—Aiwit doorbells do not support 5 GHz.
Enter the WiFi Password
Type in the password for your new network. Double-check for typos—incorrect passwords are a common cause of connection failures. The app may offer to save the password for future use.
Confirm and Send
Tap “Connect” or “Send” to transmit the network information to the doorbell. The app will show a progress bar or status message while the doorbell attempts to connect.
Wait for Success Message
If successful, you’ll see a confirmation like “Connected successfully” or “WiFi updated.” The doorbell may reboot automatically. This can take 1–2 minutes.
Step 5: Test the Connection
After the connection is established, it’s important to verify that everything is working correctly.
Check Live View
Tap the “Live View” or “Watch Live” button in the app. You should see a clear video feed from your doorbell. If the image is blurry or delayed, the signal may be weak.
Test Motion Detection
Walk in front of the doorbell to trigger motion detection. You should receive a notification on your phone within a few seconds.
Verify Two-Way Audio
Tap the microphone icon and speak. You should hear your voice through the doorbell’s speaker. This confirms the audio connection is working.
Check Recording and Alerts
Ensure that motion events are being recorded and saved to the cloud (if enabled). Also, confirm that push notifications are arriving promptly.
Troubleshooting Common Issues
Sometimes, the WiFi change process doesn’t go smoothly. Here are solutions to the most common problems.
Doorbell Won’t Enter Pairing Mode
If the app doesn’t detect the doorbell after pressing the button:
- Make sure the doorbell has power—check the battery level or wiring.
- Press and hold the button for a full 10 seconds.
- Try resetting the doorbell completely (see below).
- Move closer to the doorbell—distance can affect signal detection.
Connection Fails or Times Out
If the app says “Connection failed” or “Timeout”:
- Double-check the WiFi password—even one wrong character will prevent connection.
- Ensure you’re using a 2.4 GHz network. Many modern routers broadcast both 2.4 GHz and 5 GHz under the same name. Log into your router settings to separate them if needed.
- Restart your router and try again.
- Move your phone and doorbell closer to the router during setup.
Weak Signal or Poor Video Quality
If the live view is laggy or disconnects frequently:
- Check the signal strength in the app—many Aiwit apps show a WiFi signal indicator.
- Reposition your router or use a WiFi extender near the doorbell.
- Avoid placing the doorbell behind thick walls, metal frames, or near large appliances that cause interference.
- Consider upgrading to a mesh WiFi system for better coverage.
App Crashes or Freezes
If the Aiwit app becomes unresponsive:
- Close and reopen the app.
- Restart your phone.
- Update the app to the latest version.
- Clear the app cache (Android) or reinstall the app (iOS/Android).
Doorbell Doesn’t Appear in App
If your doorbell disappears from the device list:
- Ensure it’s still powered on.
- Check if it’s connected to any network—try accessing it via the app’s “Add Device” feature.
- Perform a factory reset and re-add the device.
How to Factory Reset Your Aiwit Doorbell
If all else fails, a factory reset may be necessary. This erases all settings and returns the doorbell to its original state, allowing you to set it up as if it were new.
When to Reset
Consider a factory reset if:
- The doorbell won’t connect to any network.
- The app can’t detect the device.
- You’re giving the doorbell to someone else.
- You’re experiencing persistent glitches.
Steps to Reset
- Press and hold the reset button on the doorbell for 15–20 seconds.
- Wait for the voice prompt saying “Factory reset complete” or see a series of rapid light flashes.
- The doorbell will reboot and enter pairing mode automatically.
- Open the Aiwit app and follow the initial setup process to add the device and connect it to your new WiFi network.
Note: A factory reset will delete all recorded events and settings. Make sure you’ve backed up any important footage before proceeding.
Tips for a Smooth WiFi Transition
To make the process even easier, keep these best practices in mind:
- Update the app regularly: New versions often include bug fixes and improved connectivity.
- Use a strong, simple password: Avoid special characters that might cause issues during transmission.
- Name your networks clearly: Use distinct names for 2.4 GHz and 5 GHz bands (e.g., “HomeWiFi_2.4G” and “HomeWiFi_5G”).
- Schedule the change during low usage: Avoid peak internet times to reduce interference.
- Keep the doorbell charged: Low battery can cause connection failures or incomplete setups.
- Document your settings: Write down your WiFi name and password in case you need to repeat the process.
Conclusion
Changing the WiFi network on your Aiwit doorbell doesn’t have to be complicated. With the right preparation and a clear understanding of the steps, you can update your connection in under 10 minutes. The key is to use the Aiwit app, ensure you’re on a 2.4 GHz network, and follow the pairing process carefully.
Remember to test your doorbell after the change to confirm everything is working—live view, motion alerts, and two-way audio should all function smoothly. If you run into issues, don’t panic. Most problems can be resolved with a simple reset or by checking your network settings.
By keeping your Aiwit doorbell connected to a reliable WiFi network, you ensure continuous protection and peace of mind. Whether you’re upgrading your home network or moving to a new place, this guide has you covered. Stay safe, stay connected, and enjoy the smart convenience your Aiwit doorbell provides.