How to Fit Ring Doorbell 4

Included in the Box

When you unbox your Ring Doorbell 4, you should find:

• Ring Doorbell 4 unit
• Mounting plate (with security screws)
• Two screw sets (for different wall types)
• Wire nuts
• Cable clips
• Wedge and corner mounting kits (for angled installation)
• Security screwdriver (tiny star-shaped tool)
• Quick start guide

Optional but Helpful

• Smartphone with Ring app installed: Download the free Ring app from the App Store or Google Play before starting.
• Wi-Fi network name and password: You’ll need this during setup.
• Ladder: If your doorbell is mounted high.
• Assistant: Having someone hold the doorbell while you wire it can be a big help.

Step 1: Check Compatibility and Power Requirements

Not all doorbell systems are created equal. Before you remove your old doorbell, it’s crucial to verify that your home’s wiring can support the Ring Doorbell 4.

Check Your Existing Doorbell Transformer

The Ring Doorbell 4 requires a transformer that outputs between 8V and 24V AC, with at least 10VA (volt-amperes) of power. Most older doorbells use 16V transformers, which work perfectly.

To check:

1. Turn off power at the circuit breaker.
2. Remove your existing doorbell button.
3. Use a voltage tester to measure the voltage across the two wires.
4. If the reading is between 8V and 24V, you’re good to go. If it’s below 8V, you may need to upgrade your transformer.

Pro Tip: If you’re unsure about your transformer, consult an electrician. Using an underpowered transformer can cause your Ring Doorbell 4 to malfunction or not turn on at all.

Wi-Fi Requirements

Your Ring Doorbell 4 connects to your home Wi-Fi network. It supports 2.4 GHz networks (not 5 GHz). Make sure your router is within range—ideally within 30 feet of the doorbell location. If your Wi-Fi signal is weak, consider using a Wi-Fi extender.

Step 2: Turn Off Power and Remove Old Doorbell

Safety first! Always turn off the power before working with electrical wiring.

Turn Off the Circuit Breaker

Go to your electrical panel and turn off the breaker that controls your doorbell. If you’re not sure which one it is, turn off the main breaker to be safe.

Remove the Old Doorbell

1. Unscrew the old doorbell from the wall.
2. Gently pull it away to expose the two wires.
3. Take a photo of the wiring setup for reference.
4. Disconnect the wires by loosening the terminal screws or removing wire nuts.
5. Cap the wires with wire nuts to prevent them from touching each other or the wall.

Note: If your old doorbell was wireless or battery-powered, you may not have wires. In that case, you’ll need to install a transformer and run wires—this is more complex and may require an electrician.

Step 3: Choose Your Mounting Option

The Ring Doorbell 4 comes with flexible mounting options to suit different doorframes and angles.

Standard Wall Mount

Use this if your doorbell is flush against a flat wall and the camera angle looks straight at your doorstep.

Wedge Mount

The wedge kit tilts the doorbell downward by 5, 10, or 15 degrees. Use this if your doorbell is mounted high or you want better coverage of your walkway.

Corner Mount

Ideal for doors near a corner or if you want to angle the camera sideways. The corner mount allows up to a 45-degree adjustment.

Tip: Hold the mounting plate (with wedge or corner) against the wall and look through the camera lens (using the Ring app’s preview) to find the best angle before drilling.

Step 4: Install the Mounting Plate

Now it’s time to secure the mounting plate to your wall.

Position the Plate

1. Hold the mounting plate (with any wedge or corner attachment) against the wall where you want the doorbell.
2. Use a level to ensure it’s straight.
3. Mark the screw holes with a pencil.

Drill Pilot Holes

1. Use a drill bit slightly smaller than your screws to create pilot holes.
2. If drilling into brick or concrete, use a masonry bit and wall plugs.

Secure the Plate

1. Align the plate with the holes.
2. Insert screws and tighten with a screwdriver.
3. Make sure the plate is firm and doesn’t wiggle.

Pro Tip: If your wires are too short, gently pull them through the back of the mounting plate before securing it.

Step 5: Connect the Wires

This is the most critical part of the installation. Proper wiring ensures your doorbell gets consistent power.

Prepare the Wires

1. Strip about 1/4 inch of insulation from the ends of the two wires if needed.
2. Twist the exposed copper strands to prevent fraying.

Attach to Terminal Screws

1. Loosen the two terminal screws on the back of the Ring Doorbell 4.
2. Insert one wire under each screw.
3. Tighten the screws securely—don’t over-tighten, but make sure the wires can’t pull out.

Important: It doesn’t matter which wire goes to which terminal—Ring Doorbell 4 is not polarity-sensitive.

Use Cable Clips

Secure the wires to the wall using the included cable clips. This prevents strain on the connections and keeps everything neat.

Step 6: Attach the Ring Doorbell 4

Now that the mounting plate is secure and the wires are connected, it’s time to attach the doorbell.

Slide the Doorbell onto the Plate

1. Align the slots on the back of the doorbell with the hooks on the mounting plate.
2. Gently slide it down until it clicks into place.

Secure with Security Screw

1. Use the included security screwdriver to tighten the small screw at the bottom of the doorbell.
2. This prevents theft and ensures the device stays firmly attached.

Note: Don’t overtighten—just snug enough to prevent removal.

Step 7: Turn Power Back On and Test

Now that everything is installed, restore power and test the system.

Restore Power

Go back to your circuit breaker and turn the power back on.

Check the Doorbell

1. Wait about 30 seconds for the doorbell to power up.
2. Look for the LED light on the front—it should glow solid white when ready.
3. If it blinks or doesn’t light up, see the troubleshooting section below.

Step 8: Set Up the Ring App

The final step is pairing your doorbell with the Ring app and customizing settings.

Download and Open the Ring App

If you haven’t already, download the Ring app on your smartphone and create an account.

Add a New Device

1. Tap the three-line menu (☰) and select “Set up a device.”
2. Choose “Doorbells” and then “Ring Video Doorbell 4.”
3. Follow the on-screen instructions.

Scan the QR Code

1. Point your phone’s camera at the QR code on the back of the doorbell.
2. The app will detect it and begin pairing.

Connect to Wi-Fi

1. Select your Wi-Fi network and enter the password.
2. Wait for the doorbell to connect—this may take a minute.

Complete Setup

1. Name your doorbell (e.g., “Front Door”).
2. Set up motion zones to control where the camera detects movement.
3. Enable notifications and adjust sensitivity.
4. Test two-way talk and live view.

Pro Tip: Enable “Motion Alerts” and “Ring Alerts” so you’re notified when someone approaches or presses the button.

Troubleshooting Common Installation Issues

Even with careful installation, problems can arise. Here’s how to fix the most common issues.

Doorbell Won’t Power On

• Check the breaker: Make sure power is restored.
• Test voltage: Use a voltage tester to confirm the wires are live.
• Inspect connections: Ensure wires are securely attached and not loose.
• Transformer issue: If voltage is too low, upgrade your transformer.

Wi-Fi Connection Fails

• Signal strength: Move your router closer or use a Wi-Fi extender.
• Network type: Ensure you’re connecting to a 2.4 GHz network.
• Restart router: Power cycle your router and try again.

Blurry or Dark Video

• Clean the lens: Wipe with a soft, dry cloth.
• Check lighting: Ring Doorbell 4 has night vision, but very dark areas may need external lighting.
• Adjust angle: Use the wedge or corner mount to improve the view.

Motion Alerts Not Working

• Check motion zones: Make sure the zones cover the area you want to monitor.
• Adjust sensitivity: Increase sensitivity in the app if motion is being missed.
• Test with movement: Walk in front of the doorbell to trigger a test alert.

Maintenance Tips for Long-Term Performance

To keep your Ring Doorbell 4 working perfectly, follow these maintenance tips:

• Clean the lens monthly: Use a microfiber cloth to remove dust and smudges.
• Check wiring annually: Ensure connections are tight and wires aren’t damaged.
• Update firmware: The Ring app will notify you of updates—install them promptly.
• Monitor battery (if using): The Ring Doorbell 4 is hardwired, but if you ever switch to battery mode, charge it regularly.
• Review settings: Periodically adjust motion zones and notification preferences based on seasonal changes.

Conclusion

Installing the Ring Doorbell 4 is a straightforward process when you follow the right steps. From checking compatibility and turning off power to mounting the device and setting up the app, each stage is designed to ensure a secure, reliable, and high-performing smart doorbell.

By using the correct tools, choosing the best mounting option, and connecting the wires properly, you’ll enjoy crystal-clear video, instant alerts, and peace of mind knowing your home is protected. And if you run into any issues, the troubleshooting tips in this guide will help you resolve them quickly.

Now that you know how to fit Ring Doorbell 4, you’re ready to enhance your home security with one of the most popular smart doorbells on the market. Take your time, follow the steps, and don’t hesitate to consult a professional if you’re unsure about electrical work.

Welcome to the future of doorbells—your front door just got a whole lot smarter.