Installing an angle mount on your Ring Doorbell helps improve your camera’s field of view, especially if your door is recessed or your wall is uneven. This guide walks you through the entire process—from choosing the right mount to final setup—so you can get the best possible footage and enhance your home security.
Key Takeaways
- Choose the correct angle mount: Ring offers 5°, 10°, and 15° mounts—pick the one that best fits your door and wall setup.
- Turn off power before installation: Always shut off power at the breaker to avoid electrical shock when working near wiring.
- Use the right tools: A drill, level, screwdriver, and measuring tape ensure a secure and straight installation.
- Adjust the angle carefully: Mount the bracket at the desired angle to avoid blind spots and maximize coverage.
- Test the view after mounting: Use the Ring app to check the camera angle and make adjustments if needed.
- Secure all screws tightly: Loose mounting can cause vibration or misalignment, affecting video quality.
- Consider professional help if unsure: If you’re uncomfortable with wiring or drilling, hire a licensed electrician.
How to Install Angle Mount on Ring Doorbell: A Complete Step-by-Step Guide
If you’ve ever noticed that your Ring Doorbell isn’t capturing the full area in front of your door—maybe it’s missing packages, people walking by, or the walkway—you’re not alone. Many homeowners face this issue, especially when their door is set back into the wall or the mounting surface isn’t flat. That’s where the Ring Doorbell angle mount comes in.
An angle mount allows you to tilt your Ring Doorbell forward or to the side, giving you a better view of your entryway. Whether you have a recessed door, a slanted wall, or just want to eliminate blind spots, installing an angle mount can make a big difference in your home security setup.
In this guide, we’ll walk you through how to install angle mount on Ring Doorbell—from choosing the right mount to final testing. We’ll cover everything you need to know, including tools, safety tips, and troubleshooting common issues. By the end, you’ll have a perfectly angled Ring Doorbell that captures every important moment.
Why Use an Angle Mount with Your Ring Doorbell?
Visual guide about How to Install Angle Mount on Ring Doorbell
Image source: i.ytimg.com
Before diving into the installation, it’s helpful to understand why an angle mount is beneficial. The standard Ring Doorbell mounts flush against the wall, which works well for most homes. But in certain situations, that flat mounting can limit your camera’s field of view.
For example:
– If your door is recessed (set back from the wall), the camera might only see the doorframe and not the area in front.
– If your wall is uneven or slanted, the camera could be pointing too high or too low.
– If you want to monitor a pathway or driveway next to your door, a side angle can help.
The Ring angle mount solves these problems by letting you adjust the viewing angle. Ring offers three options: 5°, 10°, and 15°. The higher the degree, the more the camera tilts forward. Choose based on how much adjustment you need.
Using an angle mount also helps reduce glare from sunlight or porch lights, improves motion detection accuracy, and ensures visitors are clearly visible when they approach your door.
What You’ll Need to Install the Angle Mount
Before starting, gather all the tools and materials. Having everything ready will make the process smoother and safer.
Tools and Materials
- Ring Doorbell angle mount (5°, 10°, or 15°)
- Ring Doorbell (compatible model)
- Drill with drill bits (usually 3/16″ for masonry or 1/8″ for wood)
- Screwdriver (Phillips head)
- Level (to ensure the mount is straight)
- Measuring tape
- Pencil (for marking drill points)
- Screws and wall anchors (usually included with the mount)
- Electrical tape (optional, for wire management)
- Voltage tester (if working with wired models)
- Safety goggles and gloves
Compatible Ring Doorbell Models
Most Ring Doorbell models work with the angle mount, including:
– Ring Video Doorbell (1st to 4th Gen)
– Ring Video Doorbell Pro
– Ring Video Doorbell Pro 2
– Ring Video Doorbell Wired
– Ring Video Doorbell Elite
Check your model before purchasing the mount. The angle mount is not compatible with Ring Doorbell 2 (wired version) or older non-Ring branded doorbells.
Step 1: Choose the Right Angle Mount
The first step in installing an angle mount is selecting the correct degree of tilt. Ring offers three options:
– 5° mount: Slight forward tilt. Best for doors that are only slightly recessed.
– 10° mount: Moderate tilt. Ideal for most recessed doors or uneven walls.
– 15° mount: Steep tilt. Use when the door is deeply set back or you need maximum forward coverage.
To decide which one to use, stand back and look at your door. If the area in front of the door isn’t visible in the current camera view, you likely need an angle mount. Start with the 10° mount—it’s the most versatile. If that’s not enough, try the 15°.
You can also use the Ring app to preview the camera view before installing. Temporarily hold the doorbell at different angles to see what works best.
Step 2: Turn Off Power (For Wired Models)
If you’re installing a wired Ring Doorbell (like the Pro or Wired model), safety is critical. Always turn off power before working with electrical wiring.
How to Safely Turn Off Power
- Go to your home’s electrical panel (breaker box).
- Locate the circuit that powers your existing doorbell. It’s usually labeled “Doorbell” or “Front Door.”
- Flip the breaker to the “Off” position.
- Use a voltage tester on the doorbell wires to confirm no power is flowing.
Never skip this step. Even low-voltage doorbell wires can cause a shock or damage your Ring device if handled incorrectly.
If you’re installing a battery-powered Ring Doorbell (like the standard Video Doorbell), you don’t need to turn off power. However, it’s still a good idea to remove the battery before starting.
Step 3: Remove the Existing Doorbell (If Applicable)
If you’re replacing an old doorbell or upgrading from a standard mount, you’ll need to remove it first.
Steps to Remove the Old Doorbell
- Unscrew the faceplate of the existing doorbell using a screwdriver.
- Gently pull the doorbell away from the wall to expose the wires.
- Take a photo of the wiring setup for reference.
- Disconnect the wires by loosening the terminal screws or unclipping the connectors.
- Cap the wires with wire nuts or electrical tape to prevent them from touching.
- Remove any old mounting bracket or screws from the wall.
If you’re installing the Ring Doorbell for the first time, skip this step and proceed to marking the new mount location.
Step 4: Mark the Mounting Location
Now it’s time to position the angle mount. Proper placement ensures the best camera angle and avoids obstructions.
How to Find the Ideal Spot
- The doorbell should be mounted 48 inches (4 feet) above the ground. This is the recommended height for optimal motion detection and video quality.
- It should be centered on the doorframe or wall, not too close to the door itself.
- Make sure there’s enough space for the angle mount to tilt without hitting the door or trim.
- Avoid mounting near windows, bright lights, or reflective surfaces that could cause glare.
Use a measuring tape to find the 48-inch mark. Hold the angle mount against the wall at that height and use a level to ensure it’s straight. Mark the screw holes with a pencil.
Tip: Test the Angle First
Before drilling, hold the Ring Doorbell in place at the desired angle. Use the Ring app to check the live view. Adjust the position if needed. This helps avoid mistakes and ensures you’ll get the best coverage.
Step 5: Drill Holes and Install the Angle Mount
With the location marked, it’s time to secure the mount.
Drilling the Holes
- Put on safety goggles and gloves.
- Select the appropriate drill bit for your wall type:
- Use a 1/8″ bit for wood or drywall.
- Use a 3/16″ masonry bit for brick, concrete, or stucco.
- Drill pilot holes at the marked locations. Go slowly to avoid cracking the wall.
- If drilling into masonry, use a hammer drill for best results.
Securing the Mount
- Insert wall anchors into the holes if needed (especially for drywall or masonry).
- Align the angle mount with the holes.
- Use the provided screws to attach the mount to the wall. Tighten them securely, but don’t over-tighten, as this can crack the mount.
- Use a level again to confirm the mount is straight.
Managing the Wires
If you’re using a wired model, carefully feed the doorbell wires through the center hole of the mount. Leave enough slack to connect them later. Use electrical tape to bundle the wires neatly and prevent them from getting pinched.
Step 6: Attach the Ring Doorbell to the Angle Mount
Now that the mount is secure, it’s time to install the doorbell.
For Wired Models
- Connect the doorbell wires to the terminals on the back of the Ring Doorbell. Most models have two terminals: one for the transformer wire and one for the chime.
- Tighten the screws to secure the wires. Make sure they’re snug but not stripped.
- Push any excess wire back into the wall.
- Align the doorbell with the mounting bracket on the angle mount.
- Slide the doorbell down until it clicks into place.
- Secure it with the included security screw using a screwdriver.
For Battery-Powered Models
- Insert the battery into the doorbell.
- Align the doorbell with the mounting bracket.
- Slide it down until it locks in place.
- Secure with the security screw.
Tip: Don’t Forget the Security Screw
The security screw prevents thieves from easily removing your doorbell. Always install it, even if it’s a minor step.
Step 7: Restore Power and Test the Installation
If you turned off the power, now’s the time to turn it back on.
Restoring Power
- Go back to the breaker box.
- Flip the doorbell circuit back to “On.”
- Wait a few seconds for the Ring Doorbell to power up.
Testing the Doorbell
- Open the Ring app on your phone.
- Tap on your device to view the live feed.
- Check the camera angle: Can you see the walkway, driveway, or front yard clearly?
- Test the motion detection by walking in front of the doorbell.
- Press the doorbell button to ensure the chime rings (if connected).
If everything looks good, you’re done! If not, proceed to the troubleshooting section.
Troubleshooting Common Installation Issues
Even with careful installation, you might run into a few problems. Here’s how to fix the most common ones.
Issue: Camera View Is Still Too High or Too Low
Solution: The angle mount may not be tilted enough. Try a higher-degree mount (e.g., switch from 10° to 15°). Alternatively, adjust the position slightly higher or lower on the wall.
Issue: Doorbell Won’t Power On (Wired Model)
Solution: Double-check the wiring. Ensure the wires are securely connected and not reversed. Use a voltage tester to confirm power is reaching the doorbell. If the voltage is too low (below 16V), you may need a Ring Transformer.
Issue: Blurry or Glared Video
Solution: The camera might be facing direct sunlight or a bright porch light. Try adjusting the angle slightly or installing a sunshade. Clean the camera lens with a soft cloth.
Issue: Motion Detection Isn’t Working Well
Solution: The angle might be too steep or too shallow. Use the Ring app to adjust motion zones. Make sure the detection area covers the path people walk on.
Issue: Doorbell Feels Loose
Solution: Tighten the security screw. If the mount itself is wobbly, remove it and check the screws and wall anchors. Replace with longer or heavier-duty anchors if needed.
Tips for a Professional-Looking Installation
A clean, secure installation not only works better but also looks great. Here are some pro tips:
- Use a level every time: Even a small tilt can affect the camera angle.
- Hide the wires: If possible, run wires through the wall or use wire covers for a cleaner look.
- Paint the mount: If the mount doesn’t match your wall color, use outdoor paint to blend it in.
- Check local regulations: Some neighborhoods have rules about doorbell placement or drilling into exterior walls.
- Schedule regular maintenance: Clean the camera lens and check the mount every few months.
When to Call a Professional
While installing an angle mount is DIY-friendly, some situations call for expert help:
- You’re uncomfortable working with electrical wiring.
- Your home has complex wiring or a hardwired chime system.
- You need to run wires through walls or concrete.
- You’re unsure about the correct voltage or transformer requirements.
A licensed electrician can ensure a safe, code-compliant installation. It’s a small investment for peace of mind.
Conclusion
Installing an angle mount on your Ring Doorbell is a simple yet powerful upgrade that can dramatically improve your home security. By adjusting the camera angle, you eliminate blind spots, capture clearer footage, and ensure that every visitor—wanted or unwanted—is recorded.
From choosing the right mount to testing the final view, this guide has walked you through every step of the process. Remember to prioritize safety, use the right tools, and take your time. A well-installed angle mount not only works better but also lasts longer.
Whether you’re dealing with a recessed door, an uneven wall, or just want better coverage, the angle mount is a smart solution. Now that you know how to install angle mount on Ring Doorbell, you can enjoy a smarter, safer home with confidence.