Installing an Angle Ring Doorbell Pro outside is easier than you think with the right tools and guidance. This guide walks you through every step—from choosing the perfect spot to final testing—so your smart doorbell works flawlessly.
Key Takeaways
- Choose the right mounting angle: The Angle Ring Doorbell Pro is designed for angled surfaces, so pick a location that matches its 30° or 45° bracket for optimal video coverage.
- Turn off power before wiring: Always shut off the circuit breaker to avoid electrical shock when connecting to existing doorbell wiring.
- Use the included level tool: Proper alignment ensures your video feed isn’t tilted, making it easier to see visitors clearly.
- Test Wi-Fi signal strength: Before mounting, check your Wi-Fi signal at the installation spot using the Ring app to prevent connectivity issues.
- Secure all screws tightly: Loose mounting can cause vibration or misalignment, affecting video quality and motion detection.
- Update firmware after setup: Once installed, open the Ring app and check for firmware updates to ensure peak performance.
- Adjust motion zones in the app: Customize detection areas to reduce false alerts from passing cars or tree movement.
How to Install an Angle Ring Doorbell Pro Outside
So, you’ve got your hands on the Angle Ring Doorbell Pro—congratulations! This sleek, feature-packed smart doorbell is perfect for homes with angled entryways, brick walls, or unique architectural features. Unlike the standard Ring Doorbell, the Angle version comes with specialized mounting brackets that let you install it on surfaces that aren’t flat or straight-on. Whether you’re replacing an old doorbell or setting up your first smart doorbell, this guide will walk you through the entire process—safely, efficiently, and with confidence.
In this comprehensive how-to, you’ll learn everything from planning your installation to final testing and app setup. We’ll cover tools you’ll need, how to handle wiring (even if you’re not an electrician), tips for strong Wi-Fi connectivity, and how to avoid common mistakes. By the end, your Angle Ring Doorbell Pro will be securely mounted, fully functional, and ready to keep your home safe and connected.
Let’s get started!
What You’ll Need Before You Begin
Visual guide about How to Install at Angle Ring Doorbell Pro Outside
Image source: ringdoorbellinstallationguy.com
Before you grab your drill and head outside, make sure you have all the necessary tools and materials. Having everything ready will save you time and frustration.
Tools Required
- Phillips head screwdriver
- Drill with 1/4-inch drill bit (for masonry or wood)
- Level (the Ring kit includes a small one, but a larger one helps)
- Tape measure
- Pencil or marker
- Wire strippers (if reusing old wires)
- Electrical tape
- Safety goggles
Included in the Box
- Angle Ring Doorbell Pro unit
- 30° and 45° mounting brackets
- Screws and wall anchors
- Level tool
- Wire nuts
- Security screw and tool
- Quick start guide
Optional but Helpful
- Smartphone with the Ring app installed
- Wi-Fi extender (if signal is weak at the door)
- Voltage tester (to confirm power is off)
- Helper (for holding the doorbell during installation)
Pro tip: Charge your Ring Doorbell Pro fully before installation. It comes partially charged, but a full charge ensures it stays on during setup.
Step 1: Choose the Best Location
Picking the right spot is crucial. The Angle Ring Doorbell Pro is designed for angled surfaces, but you still need to consider visibility, Wi-Fi strength, and ease of access.
Ideal Placement Tips
- Height: Mount the doorbell about 48 inches (4 feet) from the ground. This is the standard height for most doorbells and ensures clear facial recognition.
- Angle: Use the 30° or 45° bracket to match your wall’s angle. This ensures the camera points straight at the walkway, not up at the sky or down at the ground.
- Field of View: The Ring Doorbell Pro has a 155° diagonal field of view. Position it so it covers your front walk, driveway, or porch—where visitors approach.
- Wi-Fi Signal: Stand at the proposed spot with your phone and open the Ring app. Go to Device Health > Signal Strength. You want at least 2–3 bars.
Avoid These Common Mistakes
- Installing too high or too low (makes it hard to see faces)
- Pointing the camera into direct sunlight (causes glare)
- Mounting near metal surfaces (can block Wi-Fi signals)
- Placing it where it gets hit by sprinklers or rain runoff
Example: If your front door is set back in a brick entryway that angles inward, the 45° bracket will help the camera face the sidewalk instead of the wall.
Step 2: Turn Off the Power
Safety first! Even though the Ring Doorbell Pro runs on low voltage, it’s still connected to your home’s electrical system. Turning off the power prevents shocks and protects your device.
How to Safely Shut Off Power
- Locate your home’s main electrical panel (breaker box).
- Find the circuit labeled “Doorbell” or “Chime.” If it’s not labeled, turn off the main breaker to be safe.
- Use a voltage tester on the existing doorbell wires to confirm no current is flowing.
- Turn the breaker back on only after the installation is complete.
⚠️ Warning: Never work on live wires. If you’re unsure, consult a licensed electrician.
Step 3: Remove the Old Doorbell (If Applicable)
If you’re replacing an existing doorbell, you’ll need to remove it first.
Steps to Remove the Old Unit
- Unscrew the front cover of the old doorbell.
- Disconnect the two wires by loosening the terminal screws.
- Gently pull the wires out—don’t cut them unless necessary.
- Remove the old mounting plate and screws.
- Patch any large holes with spackle if needed (for cosmetic reasons).
Pro tip: Label the wires (e.g., “Front” and “Trans”) with tape so you know which is which when reconnecting.
Step 4: Select the Right Mounting Bracket
The Angle Ring Doorbell Pro comes with two brackets: 30° and 45°. Choose the one that best matches your wall’s angle.
How to Choose
- 30° bracket: Best for slight angles, like a wall that slopes gently inward.
- 45° bracket: Ideal for sharper angles, such as a corner entry or deep-set door.
Test fit the bracket against the wall. It should sit flush without gaps. If neither fits perfectly, you can use both brackets together (stacked) for a custom angle—though this is rare.
Attach the Bracket
- Hold the bracket against the wall at 48 inches high.
- Use the included level to ensure it’s straight.
- Mark the screw holes with a pencil.
- Drill pilot holes using a 1/4-inch bit (use masonry bit for brick or concrete).
- Insert wall anchors if needed (included).
- Screw the bracket into place using the provided screws.
Double-check that the bracket is secure and level. A wobbly mount will affect video quality.
Step 5: Connect the Wires
Now it’s time to connect your doorbell to power.
Wiring the Ring Doorbell Pro
- Strip about 1/4 inch of insulation from each wire if needed.
- Loosen the terminal screws on the back of the Ring Doorbell Pro.
- Insert one wire into each terminal (it doesn’t matter which wire goes where).
- Tighten the screws to secure the wires.
- Wrap the connections with electrical tape for extra protection.
💡 Note: The Ring Doorbell Pro works with most existing doorbell systems (8–24V AC). If you have a digital chime or intercom, check compatibility on Ring’s website.
Using a Ring Chime (Optional)
If you don’t have a mechanical chime or want louder alerts, you can use the Ring Chime or Chime Pro. These plug into any outlet and sync with your doorbell via Wi-Fi.
Step 6: Mount the Doorbell
With the bracket in place and wires connected, it’s time to attach the doorbell.
Secure the Unit
- Align the doorbell with the mounting bracket.
- Slide it down until it clicks into place.
- Insert the security screw at the bottom using the included tool.
- Tighten it just enough to prevent removal—don’t over-tighten.
The security screw prevents theft, so don’t skip this step!
Step 7: Restore Power and Test
Now that everything is connected, turn the power back on.
Power On and Check
- Go back to the breaker box and turn the doorbell circuit back on.
- Wait 30–60 seconds for the doorbell to power up.
- You should see a light ring on the front—blue means it’s connecting to Wi-Fi.
If the light doesn’t turn on, double-check your wiring and power supply.
Step 8: Set Up the Ring App
The Ring app is your control center. Download it from the App Store or Google Play if you haven’t already.
App Setup Steps
- Open the Ring app and log in (or create an account).
- Tap the “+” icon and select “Set up a device.”
- Choose “Doorbells” > “Ring Doorbell Pro.”
- Scan the QR code on the back of your doorbell.
- Follow the on-screen prompts to connect to Wi-Fi.
- Name your doorbell (e.g., “Front Door”).
- Complete the setup by confirming location and preferences.
During setup, the app will guide you through motion settings, alerts, and video quality.
Step 9: Adjust Settings for Best Performance
Once installed, fine-tune your doorbell for the best experience.
Recommended Settings
- Motion Zones: Go to Device Settings > Motion Settings > Motion Zones. Draw zones to focus on your walkway and ignore roads or trees.
- Motion Sensitivity: Set to “Medium” to start. Adjust based on false alerts.
- Video Quality: Choose “Best” if your Wi-Fi is strong. Lower it if you have buffering.
- Night Vision: Enable “Auto” for clear footage after dark.
- Two-Way Talk: Test the microphone and speaker to ensure clear communication.
Pro tip: Enable “People Only Mode” to reduce notifications from cars, animals, or shadows.
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix the most common ones.
Doorbell Won’t Turn On
- Check that power is restored at the breaker.
- Verify wires are securely connected.
- Test the voltage at the terminals with a multimeter (should be 8–24V AC).
Weak Wi-Fi Signal
- Move your router closer or use a Wi-Fi extender.
- Switch to the 2.4GHz band in the Ring app (better range than 5GHz).
- Avoid installing near metal doors, mirrors, or thick walls.
Video Is Blurry or Tilted
- Re-level the mounting bracket.
- Clean the camera lens with a microfiber cloth.
- Adjust the angle using the bracket or add a wedge.
Motion Alerts Too Frequent
- Narrow the motion zones.
- Lower sensitivity.
- Enable “People Only Mode.”
Chime Doesn’t Ring
- Ensure your mechanical chime is compatible.
- Check wire connections.
- Use a Ring Chime if your existing chime doesn’t work.
Maintenance Tips to Keep It Running Smoothly
Your Angle Ring Doorbell Pro is built to last, but a little care goes a long way.
Monthly Checks
- Clean the lens and motion sensor with a soft, dry cloth.
- Check for loose screws or mounting issues.
- Update the firmware via the Ring app.
Seasonal Care
- In winter, gently remove ice or snow buildup.
- In summer, ensure vents aren’t blocked by dirt or insects.
- After storms, inspect for water damage or loose wiring.
Battery and Power
The Ring Doorbell Pro is hardwired, so you don’t need to charge it. But if you ever disconnect it, make sure it’s fully charged before reinstalling.
Final Thoughts
Installing an Angle Ring Doorbell Pro outside might seem intimidating at first, but with the right preparation and this guide, it’s a manageable DIY project. The key is taking your time, following safety steps, and using the included tools and brackets correctly. Once it’s up and running, you’ll enjoy crystal-clear video, reliable motion alerts, and the peace of mind that comes with a smart home.
Remember: the Angle Ring Doorbell Pro shines when installed on angled surfaces. Whether you have a brick archway, a sloped porch, or a unique entry design, this doorbell adapts to your home—not the other way around.
So grab your tools, turn off the power, and get started. Your smarter, safer front door is just a few steps away.