Installing a Blink doorbell angle mount ensures better camera coverage and clearer video footage by adjusting the doorbell’s viewing angle. This guide walks you through every step—from choosing the right mount to final testing—so you can enhance your home security with confidence.
Key Takeaways
- Choose the Right Angle Mount: Select a Blink-compatible angle mount that fits your doorframe or wall type for secure installation.
- Turn Off Power Safely: Always disconnect power at the breaker before removing your existing doorbell to prevent electrical shock.
- Use Proper Tools: A screwdriver, drill, level, and measuring tape ensure accurate and stable mounting.
- Adjust for Optimal View: Tilt the mount between 15°–30° to capture visitors’ faces and packages without distortion.
- Test After Installation: Use the Blink app to check live view, motion detection, and video quality before finalizing setup.
- Troubleshoot Common Issues: If the doorbell doesn’t power on or the image is skewed, double-check wiring, alignment, and Wi-Fi connection.
- Maintain Regularly: Clean the lens and check mount tightness every few months to ensure long-term performance.
How to Install Blink Doorbell Angle Mount: A Complete Step-by-Step Guide
So you’ve got your Blink Video Doorbell and you’re ready to take your home security up a notch—great choice! But maybe you’ve noticed that the default flat mount doesn’t give you the best view of your front door. Maybe visitors are stepping too far to the side, or packages are being dropped just out of frame. That’s where the Blink doorbell angle mount comes in.
An angle mount lets you tilt your Blink doorbell slightly downward or sideways, improving the camera’s field of view and ensuring you capture everything that matters—from face-level footage to package deliveries. Whether you’re mounting on a narrow doorframe, a slanted wall, or just want better coverage, this guide will walk you through the entire process of installing a Blink doorbell angle mount safely and effectively.
By the end of this guide, you’ll know exactly how to choose the right mount, prepare your installation site, attach the angle bracket, secure your Blink doorbell, and test the setup using the Blink app. We’ll also cover common pitfalls, troubleshooting tips, and maintenance advice to keep your system running smoothly for years.
Let’s get started!
Why Use an Angle Mount with Your Blink Doorbell?
Visual guide about How to Install Blink Doorbell Angle Mount
Image source: i.ytimg.com
Before we dive into the installation, it’s worth understanding why an angle mount is such a smart upgrade.
The standard Blink doorbell mount installs flush against the wall, which works fine in ideal conditions. But in real-world scenarios—like when your door is set back in a porch, your wall is uneven, or your front walkway is off to one side—the flat mount can leave blind spots.
An angle mount solves these problems by allowing you to tilt the doorbell downward (typically between 15° and 30°). This adjustment:
– Captures visitors at eye level, even if they’re standing slightly below the doorbell
– Reduces glare from direct sunlight or porch lights
– Improves motion detection accuracy by focusing on the walkway
– Ensures packages left on the ground are visible in recordings
Additionally, angle mounts are especially helpful if your doorbell is installed high up—common in newer homes with taller entryways. Without an angle, the camera might only see the top of someone’s head or miss activity near the ground entirely.
Blink offers official angle mounts in 15°, 30°, and 45° options, but many third-party mounts are also compatible. Just make sure any non-Blink mount you choose supports the Blink Video Doorbell’s dimensions and screw pattern.
What You’ll Need Before You Begin
Before you start drilling or unscrewing anything, gather all the tools and materials you’ll need. Having everything ready will make the process smoother and safer.
Here’s a checklist:
- Blink Video Doorbell (already set up in the app)
- Blink-compatible angle mount (15°, 30°, or 45°—choose based on your needs)
- Screwdriver (Phillips head, typically #2)
- Drill and drill bits (if mounting into brick, concrete, or hard surfaces)
- Wall anchors (if not included with the mount and needed for your wall type)
- Level (to ensure the mount is straight)
- Measuring tape (for accurate placement)
- Pencil or marker (for marking drill points)
- Safety goggles (especially when drilling)
- Electrical tape (optional, for securing wires)
- Smartphone or tablet (with the Blink app installed)
If you’re replacing an existing doorbell, you may also need wire nuts or electrical connectors to safely cap the wires. And if your current doorbell is hardwired, remember: safety first. Always turn off the power at the circuit breaker before touching any wires.
Step 1: Choose the Right Angle Mount
Not all angle mounts are created equal. The first step is selecting the right one for your setup.
Blink sells official angle mounts designed specifically for their doorbells. These come in three angles:
– 15° mount: Best for minor adjustments—ideal if your doorbell is only slightly misaligned.
– 30° mount: The most popular choice—great for standard doorframes and porches.
– 45° mount: For steep angles, like when mounting high on a wall or over a staircase.
Third-party mounts are available on Amazon, Home Depot, and other retailers. While many work well, be cautious. Look for mounts that:
– Are labeled as compatible with Blink Video Doorbell
– Include the correct screw holes and mounting plate
– Are made of durable plastic or metal (avoid flimsy materials)
Pro tip: If you’re unsure which angle to choose, start with a 30° mount. It offers a good balance between visibility and field of view. You can always adjust later or swap it out if needed.
Step 2: Turn Off Power and Remove the Old Doorbell
If your Blink doorbell is replacing a wired doorbell, you must turn off the power before removing it. Even though Blink doorbells are battery-powered, the existing wires can still carry a charge.
Turn Off the Circuit Breaker
Go to your home’s electrical panel and locate the breaker that controls your doorbell. It’s often labeled “Doorbell,” “Front Door,” or something similar. Flip it to the OFF position.
Use a non-contact voltage tester (available at hardware stores) to double-check that the wires are not live. Touch the tester to the wires—if it beeps or lights up, the power is still on. Wait a few minutes and test again.
Remove the Existing Doorbell
Unscrew the old doorbell from the wall using a screwdriver. Gently pull it away to expose the wires. You’ll typically see two wires: one labeled “Front” and one “Trans.”
Do not cut the wires. Instead, unscrew the wire nuts or electrical tape holding them together, and separate the wires. Wrap each wire individually with electrical tape to prevent them from touching and causing a short.
If you’re installing the Blink doorbell in a new location (not replacing an existing one), skip this step and move to mounting the angle bracket.
Step 3: Position and Mark the Mounting Location
Now it’s time to decide where to install the angle mount. Proper placement is key to getting the best view.
Determine the Ideal Height
The recommended height for a doorbell is between 48 and 52 inches from the ground. This ensures the camera captures faces clearly and avoids distortion.
Use your measuring tape to mark this height on the wall. If you have tall visitors or a high porch, you might go slightly higher—but avoid going above 60 inches, as the angle mount may not compensate enough.
Check for Obstructions
Look around the area. Are there plants, mailboxes, or light fixtures that could block the camera’s view? Move the mount if needed.
Also, ensure the mount won’t interfere with the door opening. The doorbell should be at least 6–8 inches away from the doorframe to avoid being hit when the door swings open.
Mark the Screw Holes
Hold the angle mount against the wall at the desired height and angle. Use a level to make sure it’s straight—this is crucial for a clean look and proper camera alignment.
Once level, use a pencil to mark the screw holes through the mount’s base. If your mount has multiple hole patterns, choose the one that best fits your wall and provides the most stability.
Step 4: Drill Pilot Holes and Install Wall Anchors
Depending on your wall type, you may need to drill pilot holes and use wall anchors for a secure fit.
Drill Pilot Holes
Use a drill bit slightly smaller than your screws to drill pilot holes at the marked spots. This prevents the wall from cracking, especially on brick, concrete, or hardwood surfaces.
If you’re mounting into drywall, you can often screw directly in—but always use wall anchors for extra support.
Insert Wall Anchors
Tap the wall anchors gently into the pilot holes using a hammer. Make sure they’re flush with the wall surface.
Wall anchors distribute the weight and prevent the screws from pulling out over time. This is especially important for angle mounts, which can put extra stress on the mounting point due to the tilt.
Step 5: Attach the Angle Mount to the Wall
Now it’s time to secure the angle mount.
Align and Screw In
Hold the angle mount over the wall anchors, aligning the screw holes. Insert the screws and tighten them with a screwdriver. Don’t overtighten—this can crack the mount or strip the screws.
Use your level again to confirm the mount is straight. Even a slight tilt can affect the camera’s view.
Check the Angle
Most angle mounts have a fixed tilt (e.g., 30°), but some adjustable models let you fine-tune the angle. If yours is adjustable, loosen the screws slightly, adjust the tilt, then retighten.
Aim for a downward angle that captures the walkway and front of the door. Avoid pointing the camera straight down—this can distort faces and reduce motion detection range.
Step 6: Install the Blink Doorbell
With the angle mount securely in place, it’s time to attach your Blink doorbell.
Attach the Mounting Plate
The Blink doorbell comes with a small mounting plate. Slide this plate onto the angle mount’s bracket. It should click into place or be secured with a screw, depending on the model.
Make sure the plate is firmly attached—this is what holds the doorbell itself.
Insert the Doorbell
Take your Blink Video Doorbell and align it with the mounting plate. Slide it down until it clicks into place. You should hear a secure snap.
If your doorbell uses batteries, make sure they’re fully charged before installation.
Secure with Anti-Theft Screw (Optional)
For added security, use the small anti-theft screw provided with your Blink doorbell. Insert it into the bottom of the device and tighten with a screwdriver. This prevents thieves from easily removing the doorbell.
Step 7: Test the Installation
You’re almost done! Now it’s time to test everything to make sure it’s working correctly.
Open the Blink App
Launch the Blink app on your smartphone or tablet. Go to the camera view for your doorbell.
Check the Live View
Look at the live feed. Is the image clear? Can you see the walkway, door, and surrounding area? If the view is too high, too low, or off-center, you may need to adjust the mount.
Test Motion Detection
Walk in front of the doorbell to trigger motion detection. The app should send a notification and start recording. Check the recorded clip to ensure the angle captures your full body and face.
Adjust if Needed
If the view isn’t ideal, you can:
– Loosen the mount screws slightly and tilt the bracket
– Reposition the entire mount (may require redrilling)
– Try a different angle mount (e.g., switch from 15° to 30°)
Take your time here—small adjustments can make a big difference.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Power On
If your Blink doorbell doesn’t turn on after installation:
– Check the batteries: Are they inserted correctly and fully charged?
– Verify the mount connection: Is the doorbell securely attached to the mounting plate?
– Test Wi-Fi: Open the app and check the signal strength. Move closer to your router if needed.
Blurry or Distorted Image
A skewed or blurry image often means the mount isn’t level or the angle is too steep.
– Use the app’s live view to assess the image
– Loosen the mount and adjust the tilt
– Clean the camera lens with a microfiber cloth
Motion Detection Not Working
If motion alerts aren’t triggering:
– Check the motion zones in the app—adjust them to cover the walkway
– Ensure the doorbell isn’t pointing at a busy street or tree (which can cause false alerts)
– Make sure the sensitivity settings are appropriate
Doorbell Keeps Falling Off
This usually means the mount isn’t secure.
– Double-check that wall anchors are used (especially on drywall)
– Tighten all screws
– Consider using a stronger mount or adding adhesive backing for extra grip
Wi-Fi Connection Drops
Weak Wi-Fi can cause video lag or disconnections.
– Move your router closer or use a Wi-Fi extender
– Ensure the doorbell is within range (typically up to 100 feet from the sync module)
– Restart the sync module and doorbell
Maintenance Tips for Long-Term Performance
Once your Blink doorbell angle mount is installed and working, a little maintenance goes a long way.
- Clean the lens monthly: Use a soft, dry cloth to remove dust, dirt, and fingerprints.
- Check the mount seasonally: Cold weather can loosen screws; tighten them if needed.
- Inspect for damage: Look for cracks in the mount or doorbell housing, especially after storms.
- Update the app and firmware: Blink regularly releases updates that improve performance and security.
- Replace batteries as needed: Most Blink doorbells last 6–12 months on a single charge, but check the app for battery status.
Regular care ensures your doorbell stays reliable and your angle mount continues to provide the best possible view.
Final Thoughts
Installing a Blink doorbell angle mount is a simple yet powerful upgrade that can dramatically improve your home security. By adjusting the camera’s angle, you gain better visibility, clearer footage, and more reliable motion detection—all without needing professional help.
From choosing the right mount to testing the final setup, this guide has walked you through every step. Remember: safety first, take your time with alignment, and always test the view in the app. With the right preparation and a little patience, you’ll have a perfectly angled doorbell that keeps your home safe and your packages in sight.
Now go enjoy that peace of mind—your front door just got a whole lot smarter.