Installing the Newpal M6 Video Doorbell Chime is simple with the right tools and guidance. This guide walks you through every step—from checking compatibility to final testing—so you can enjoy smart doorbell features with confidence.
Key Takeaways
- Check compatibility first: Ensure your existing doorbell wiring and transformer meet the M6’s power requirements (16–24V AC, 30VA minimum).
- Turn off power safely: Always shut off electricity at the breaker before handling wires to prevent shocks or damage.
- Use the included chime module: The Newpal M6 comes with a wireless chime that plugs into any standard outlet—no rewiring needed inside.
- Download the Newpal app: Pairing your doorbell via Wi-Fi requires the official app (iOS/Android) for setup and notifications.
- Test after installation: Confirm video, audio, motion detection, and chime functionality before finishing.
- Mount securely: Use the provided screws and level tool to ensure a stable, weather-resistant installation.
- Troubleshoot common issues: Weak Wi-Fi, no power, or silent chime? We cover fixes for each scenario.
Introduction: Why Upgrade to the Newpal M6 Video Doorbell Chime?
Smart doorbells are no longer just a luxury—they’re a practical upgrade for home security, convenience, and peace of mind. The Newpal M6 Video Doorbell Chime combines crisp 1080p HD video, two-way audio, motion alerts, and a wireless indoor chime into one affordable package. Whether you’re replacing an old mechanical doorbell or installing your first smart system, the M6 is designed for easy DIY setup.
In this comprehensive guide, you’ll learn exactly how to install the Newpal M6 Video Doorbell Chime—from verifying your home’s compatibility to mounting the device and syncing it with your smartphone. We’ll walk you through each step with clear instructions, safety tips, and troubleshooting advice so you can complete the job confidently in under an hour. No electrician required!
What You’ll Need Before Starting
Before you begin, gather these tools and materials to ensure a smooth installation:
Visual guide about How to Install Newpal M6 Video Doorbell Chime
Image source: drdclassichome.com
- Newpal M6 Video Doorbell Kit (includes doorbell unit, mounting plate, screws, wire connectors, and wireless chime)
- Screwdriver (Phillips head recommended)
- Drill and drill bits (if mounting on brick, stucco, or concrete)
- Voltage tester (to confirm power is off)
- Smartphone or tablet with the Newpal app installed (available on iOS and Android)
- Wi-Fi network (2.4 GHz band required; 5 GHz not supported)
- Ladder (if your doorbell is mounted high)
- Optional: Wire strippers (if existing wires are frayed), level tool, electrical tape
Pro Tip: Charge your smartphone fully before starting—you’ll need it for app setup and camera pairing.
Step 1: Check Compatibility with Your Existing Doorbell System
Not all homes are ready for a smart doorbell out of the box. The Newpal M6 requires a working doorbell circuit with adequate power. Here’s how to verify compatibility:
Check Your Transformer Voltage
The M6 needs a doorbell transformer that outputs between 16 and 24 volts AC (alternating current) and at least 30VA (volt-amperes). Most older homes have 8–16V transformers, which won’t provide enough power.
To check:
- Locate your doorbell transformer—it’s usually near your electrical panel, furnace, or in the attic.
- Look for a label indicating voltage (e.g., “16V AC” or “24V AC”).
- If unsure, use a multimeter to test the voltage across the doorbell wires at the chime unit inside your home.
Note: If your transformer is below 16V, you’ll need to upgrade it before installing the M6. Consult an electrician if you’re not comfortable doing this yourself.
Verify Existing Wiring
The M6 uses two low-voltage wires (typically labeled “Front” and “Trans”) connected to your indoor chime. Make sure:
- Both wires are intact and not corroded.
- The wires reach from the chime box to the exterior doorbell location.
- There’s enough slack to connect to the new doorbell.
If your home has a wireless doorbell with no wires, the M6 won’t work unless you run new wiring. In that case, consider a battery-powered alternative or hire an electrician.
Step 2: Turn Off Power and Remove the Old Doorbell
Safety first! Working with electrical components—even low-voltage ones—requires caution.
Shut Off the Circuit Breaker
Go to your main electrical panel and turn off the breaker that controls your doorbell circuit. If you’re unsure which one it is, turn off the main breaker to be safe.
Test for Power
Use a non-contact voltage tester at the doorbell location to confirm no electricity is flowing. Touch the tester near the wires—if it beeps or lights up, power is still on. Double-check your breaker.
Remove the Old Doorbell
Unscrew the existing doorbell from the wall. Gently pull it away to expose the two wires. Loosen the terminal screws on the back and disconnect the wires. Label them (“Front” and “Trans”) with tape if needed.
Tip: Take a photo of the wiring before disconnecting—it’ll help if you need to reference it later.
Step 3: Install the Mounting Plate
The Newpal M6 includes a sturdy mounting plate that secures the doorbell to your wall. Proper alignment ensures a clean look and prevents water damage.
Position the Plate
Hold the mounting plate against the wall where you want the doorbell. Use a level to make sure it’s straight. The ideal height is about 48 inches from the ground—eye level for most visitors.
Mark Screw Holes
Use a pencil to mark the centers of the screw holes. If mounting on wood or siding, you can screw directly into the surface. For brick, stucco, or concrete, drill pilot holes and use wall anchors.
Secure the Plate
Attach the mounting plate using the provided screws. Make sure it’s tight and flush against the wall. If your wall is uneven, use plastic spacers (included) to level it.
Pro Tip: For best Wi-Fi signal, avoid mounting the doorbell behind metal surfaces or thick walls. Keep it within 30–50 feet of your router.
Step 4: Connect the Wires to the Newpal M6
Now it’s time to wire the doorbell. The M6 uses a simple two-wire connection.
Prepare the Wires
If the ends of your existing wires are frayed or too short, strip about 1/4 inch of insulation using wire strippers. Twist the exposed copper to keep strands together.
Attach Wires to the Doorbell
The M6 has two terminal screws on the back: “Front” and “Trans.” Connect each wire to its corresponding terminal and tighten the screws securely. It doesn’t matter which wire goes where—the M6 is polarity-insensitive.
Warning: Don’t let the bare wires touch each other or the mounting plate—this can cause a short circuit.
Secure the Doorbell to the Mounting Plate
Align the M6 with the mounting plate and slide it down until it clicks into place. Give it a gentle tug to ensure it’s locked securely.
Step 5: Set Up the Wireless Chime
One of the best features of the Newpal M6 is its wireless indoor chime—no need to replace your existing mechanical chime or run new wires inside.
Plug in the Chime
Find a standard electrical outlet near your front door (or wherever you want to hear the chime). Plug in the wireless chime module. It will automatically sync with the doorbell once powered.
Test the Chime
Press the doorbell button on the M6. You should hear a clear, customizable ring from the chime. If not, check that the chime is plugged in and within range (up to 100 feet indoors).
Note: The chime comes pre-paired, but if it doesn’t work, press and hold the sync button on both the chime and doorbell for 5 seconds to re-pair.
Step 6: Power On and Connect to Wi-Fi
With everything wired and mounted, it’s time to bring the M6 to life.
Restore Power
Go back to your electrical panel and turn the breaker back on. The M6 should power up within 10–15 seconds. You’ll see a blue LED light on the front.
Download and Open the Newpal App
If you haven’t already, download the “Newpal Smart” app from the Apple App Store or Google Play. Create an account or log in.
Pair the Doorbell
In the app, tap “Add Device” and select “Video Doorbell.” Follow the on-screen prompts:
- Scan the QR code on the back of the M6 (or enter the serial number manually).
- Connect your phone to the doorbell’s temporary Wi-Fi network (named “Newpal_XXXX”).
- Select your home Wi-Fi network and enter the password.
- Wait for the app to confirm successful connection.
Tip: If pairing fails, move closer to your router or restart the doorbell by turning the breaker off and on.
Step 7: Configure Settings and Test Features
Once connected, customize your M6 to suit your needs.
Adjust Motion Sensitivity
In the app, go to “Device Settings” > “Motion Detection.” Choose from low, medium, or high sensitivity. High sensitivity may trigger alerts from passing cars or animals—adjust based on your environment.
Set Notification Preferences
Enable push notifications so you’re alerted when someone rings the bell or motion is detected. You can also set quiet hours to avoid disturbances at night.
Test Video and Audio
Open the live view in the app. Check that the video is clear and the field of view covers your doorstep. Tap the microphone icon to test two-way audio—speak and listen for clarity.
Verify Night Vision
Turn off the lights near the doorbell and check the video feed. The M6 has infrared LEDs for night vision—you should see a clear black-and-white image.
Troubleshooting Common Installation Issues
Even with careful installation, you might run into problems. Here’s how to fix the most common ones:
Doorbell Won’t Power On
- Double-check that the breaker is on.
- Test the voltage at the doorbell wires with a multimeter—should be 16–24V AC.
- Ensure wires are securely connected and not touching each other.
No Sound from Chime
- Confirm the chime is plugged into a working outlet.
- Check that the chime and doorbell are paired (re-sync if needed).
- Replace the chime’s battery if it uses one (some models do).
Poor Wi-Fi Connection
- Move your router closer or use a Wi-Fi extender.
- Ensure you’re connected to a 2.4 GHz network (not 5 GHz).
- Restart the doorbell and router.
Blurry or Dark Video
- Clean the camera lens with a soft, dry cloth.
- Adjust the angle of the doorbell for better lighting.
- Check for obstructions like dirt, spider webs, or condensation.
App Won’t Connect
- Make sure your phone is connected to the same Wi-Fi network as the doorbell.
- Restart the app and try again.
- Reset the doorbell by holding the setup button for 10 seconds.
Maintenance and Long-Term Care
To keep your Newpal M6 performing well:
- Clean the camera lens monthly.
- Check for firmware updates in the app.
- Replace the chime batteries annually (if applicable).
- Inspect wiring connections during seasonal maintenance.
Conclusion: Enjoy Your Smart Home Upgrade
Congratulations! You’ve successfully installed the Newpal M6 Video Doorbell Chime. You now have a reliable, feature-rich security system that lets you see, hear, and speak to visitors from anywhere. Whether you’re home or away, the M6 keeps you connected and informed.
Remember, smart technology works best when maintained and used wisely. Regularly check your settings, keep the app updated, and enjoy the peace of mind that comes with knowing your home is protected. If you ever run into issues, refer back to this guide or contact Newpal support for assistance.
Welcome to the future of home security—one ring at a time.