This guide walks you through how to install a no drill mount for Ring Doorbell without damaging your walls. You’ll learn the right tools, step-by-step setup, and tips for a secure, professional-looking installation.
Key Takeaways
- No drilling required: The no drill mount uses strong adhesive or clamping mechanisms to secure your Ring Doorbell without screws or wall damage.
- Compatible with most Ring models: Works with Ring Video Doorbell, Doorbell 2, 3, 3 Plus, 4, and Pro (check compatibility before purchase).
- Ideal for renters and delicate surfaces: Perfect for apartments, historic homes, or surfaces like brick, stucco, or tile where drilling isn’t allowed.
- Easy to remove and reposition: Most no drill mounts allow you to move or adjust your doorbell without leaving permanent marks.
- Ensure proper angle and height: Mount between 48–60 inches high and angled toward the walkway for optimal motion detection and video quality.
- Use high-quality adhesive: Choose mounts with 3M VHB tape or similar industrial-grade adhesive for long-lasting hold.
- Test before final placement: Always test the mount’s grip and doorbell function before committing to the final position.
How to Install No Drill Mount for Ring Doorbell
Installing a Ring Doorbell doesn’t have to mean drilling holes into your front door frame or exterior wall. Whether you’re a renter, live in a historic home, or simply want to avoid permanent damage, a no drill mount for Ring Doorbell is a smart, convenient solution. This comprehensive guide will walk you through everything you need to know—from choosing the right mount to securing it properly and troubleshooting common issues.
By the end of this guide, you’ll be able to install your Ring Doorbell securely and neatly without a single screw. We’ll cover the tools you need, step-by-step instructions, tips for different surfaces, and how to ensure your doorbell works perfectly once mounted. Let’s get started!
Why Choose a No Drill Mount?
Visual guide about How to Install No Drill Mount for Ring Doorbell
Image source: en-uk.ring.com
Before diving into the installation, it’s important to understand why a no drill mount might be the best choice for your home.
Traditional Ring Doorbell installations require drilling into your door frame or wall to secure the mounting bracket. While effective, this isn’t always practical. Renters often can’t make permanent changes, and some homeowners prefer to avoid damaging brick, stucco, or decorative surfaces. Additionally, drilling can weaken structures over time or void warranties on certain materials.
A no drill mount solves these problems. These mounts use strong adhesives, clamps, or tension-based systems to hold your Ring Doorbell in place. They’re designed to be sturdy, weather-resistant, and easy to remove—making them ideal for temporary or flexible setups.
Plus, many no drill mounts offer adjustable angles, so you can fine-tune the camera’s view without re-drilling. This is especially helpful if your doorbell isn’t perfectly aligned with the walkway or driveway.
What You’ll Need
Before beginning the installation, gather the following tools and materials. Having everything ready will make the process smoother and faster.
- No drill mount kit: Ensure it’s compatible with your Ring Doorbell model (e.g., Ring Video Doorbell, Doorbell 3, 4, or Pro).
- Isopropyl alcohol and clean cloth: For cleaning the mounting surface.
- Measuring tape: To determine the correct height and alignment.
- Level: A small bubble level helps ensure your doorbell is straight.
- Pencil or painter’s tape: For marking the spot (optional).
- Hairdryer or heat gun (optional): Helps activate adhesive in cold weather.
- Smartphone or tablet: To test the Ring app during installation.
Most no drill mounts come with adhesive strips (like 3M VHB tape), mounting brackets, and instructions. Double-check the package contents before starting.
Step 1: Choose the Right No Drill Mount
Not all no drill mounts are created equal. Before buying, confirm that the mount is compatible with your specific Ring Doorbell model. Most are designed for standard Ring Video Doorbells, but the Ring Doorbell Pro and Ring Doorbell Elite may require specialized mounts.
Look for mounts that include:
- Industrial-strength adhesive (3M VHB tape is a top choice)
- Adjustable angle settings
- Weatherproof design
- Easy removal features (e.g., pull tabs for adhesive)
Popular brands include Ring’s official No Drill Mount, EKEN, and Wasserstein. Read customer reviews to ensure the mount holds up in your climate—especially if you live in an area with extreme heat, cold, or humidity.
Step 2: Prepare the Mounting Surface
A strong bond starts with a clean, dry surface. Even the best adhesive won’t stick to dust, grease, or moisture.
Clean the Area
Use isopropyl alcohol and a clean cloth to wipe down the spot where you plan to mount the doorbell. Focus on removing dirt, oil, and any existing residue. Let the area dry completely—this is crucial for adhesive performance.
Check for Smoothness
Adhesive works best on smooth, non-porous surfaces like painted wood, metal, or vinyl siding. If your door frame is rough, textured, or made of porous materials like brick or stucco, consider using a mounting plate or primer designed for such surfaces.
Test Fit the Mount
Hold the no drill mount in place to ensure it fits properly and doesn’t interfere with the door, trim, or nearby objects. Make sure there’s enough clearance for the doorbell to open and close freely.
Step 3: Determine the Ideal Mounting Height and Angle
Proper placement ensures your Ring Doorbell captures the best video and detects motion effectively.
Height Guidelines
Mount your doorbell between 48 and 60 inches from the ground. This height is optimal for capturing faces and packages while minimizing false alerts from passing cars or animals.
Angle the Camera Correctly
The camera should face the walkway or driveway, not straight ahead. A slight downward tilt (about 10–15 degrees) helps focus on the area where visitors approach. Most no drill mounts allow you to adjust the angle before securing the adhesive.
Use a level to ensure the mount is straight. A crooked doorbell not only looks unprofessional but can also affect video quality and motion detection.
Step 4: Apply the Adhesive
This is the most critical step. A poorly applied adhesive can lead to a fallen doorbell—and potential damage.
Remove the Backing
Carefully peel off the protective liner from the adhesive strip on the mount. Avoid touching the sticky side with your fingers, as oils can reduce adhesion.
Press Firmly
Position the mount on the cleaned surface and press down firmly for at least 30 seconds. Apply even pressure across the entire back of the mount to ensure full contact.
Use a Hairdryer (If Needed)
In cold weather, adhesives may not bond well. Gently warm the surface and adhesive with a hairdryer on low heat for 30–60 seconds before applying. This activates the adhesive and improves grip.
Let It Cure
Most adhesives need time to reach full strength. Wait at least 24 hours before attaching the doorbell. Avoid touching or adjusting the mount during this time.
Step 5: Attach the Ring Doorbell
Once the mount is securely in place, it’s time to install the doorbell.
Insert the Doorbell
Slide your Ring Doorbell into the mounting bracket. You should hear a click when it’s properly seated. Some mounts use a locking screw or pin—if yours does, tighten it gently with the included tool.
Test the Fit
Give the doorbell a gentle tug to ensure it’s secure. It shouldn’t wobble or come loose.
Connect to Power
If you’re using a wired Ring Doorbell (like the Ring Doorbell 2 or Pro), connect the wires to the terminal screws on the back of the doorbell. For battery-powered models, simply insert the charged battery.
Step 6: Set Up and Test in the Ring App
Now that your doorbell is physically installed, it’s time to configure it in the Ring app.
Open the Ring App
Launch the app on your smartphone or tablet and log in to your account.
Add a New Device
Tap the menu icon (three lines), select “Set Up a Device,” then choose “Doorbells.” Follow the on-screen prompts to scan the QR code on your doorbell or enter the serial number manually.
Connect to Wi-Fi
The app will guide you through connecting your doorbell to your home Wi-Fi network. Make sure you’re within range of your router for a strong signal.
Test the Camera and Motion
Once connected, test the live view to ensure the camera angle is correct. Walk in front of the doorbell to trigger motion alerts. Adjust the angle of the mount if needed—some no drill mounts allow minor repositioning even after installation.
Tips for Different Surfaces
Not all walls are created equal. Here’s how to adapt your installation for various materials.
Painted Wood or Vinyl Siding
These are ideal for adhesive mounts. Clean thoroughly and apply as directed. Avoid areas with peeling paint or warping.
Brick or Stucco
These rough surfaces can challenge adhesives. Consider using a mounting plate or a no drill mount with a clamping system that wraps around the door frame. Alternatively, use a heavy-duty adhesive primer.
Metal Door Frames
Metal is great for adhesion, but ensure the surface is clean and dry. Avoid mounting over rust or flaking paint.
Tiled Surfaces
Smooth tile works well, but textured or glossy tiles may require extra adhesive or a specialized mount. Test a small area first.
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix them.
The Mount Won’t Stick
This is usually due to a dirty surface, cold weather, or low-quality adhesive. Re-clean the area, warm it with a hairdryer, and reapply. If it still won’t stick, consider using a different mounting method or a stronger adhesive.
The Doorbell Wobbles
Check that the mount is fully adhered and the doorbell is locked in place. Tighten any screws or locking mechanisms. If the mount itself is loose, remove it, clean both surfaces, and reapply.
Poor Wi-Fi Signal
If your doorbell keeps disconnecting, it may be too far from the router. Consider using a Wi-Fi extender or moving the router closer. Avoid mounting near large metal objects or thick walls that block signals.
Motion Alerts Are Too Sensitive
Adjust the motion zones in the Ring app to exclude areas like busy streets or trees. You can also lower the motion sensitivity setting.
Adhesive Leaves Residue When Removed
Use a plastic scraper and rubbing alcohol to gently remove leftover adhesive. Avoid using sharp tools that could scratch the surface.
How to Remove the No Drill Mount
One of the biggest advantages of a no drill mount is easy removal—especially for renters or if you’re moving.
Wait for Dry Weather
Remove the mount on a warm, dry day. Cold or wet conditions can make adhesive harder to remove.
Use a Floss or Fishing Line
Slide a piece of dental floss or fishing line behind the mount and saw gently to cut through the adhesive.
Apply Heat
Use a hairdryer to warm the adhesive for 30–60 seconds. This softens the bond and makes removal easier.
Peel Slowly
Once the adhesive is warm, slowly peel the mount away from the surface. Pull at a low angle to avoid damaging the wall.
Clean the Residue
Use rubbing alcohol and a cloth to remove any leftover adhesive. For stubborn spots, try a commercial adhesive remover.
Final Thoughts
Installing a no drill mount for your Ring Doorbell is a smart, damage-free way to enhance your home security. With the right tools, preparation, and technique, you can have your doorbell up and running in under an hour—no drilling required.
Remember to choose a high-quality mount, clean the surface thoroughly, and allow the adhesive to cure fully. Test your setup in the Ring app to ensure everything works perfectly. And if you ever need to move or remove the mount, it’s quick and easy with minimal cleanup.
Whether you’re a renter, a DIY beginner, or just prefer a cleaner look, a no drill mount offers flexibility, reliability, and peace of mind. Your Ring Doorbell will be securely in place, ready to protect your home—without leaving a single hole behind.