Installing your Ring Doorbell Plus Battery is simple with the right tools and guidance. This guide walks you through every step—from choosing the perfect location to finalizing the app setup—so you can enjoy enhanced home security in under an hour.
Key Takeaways
- Choose the right location: Mount your Ring Doorbell at chest height, 4–6 feet above the ground, and within Wi-Fi range for optimal performance.
- Gather essential tools: You’ll need a drill, screwdriver, level, and possibly a voltage tester if wiring to existing doorbell chimes.
- Use the Ring app: The official app guides you through setup, syncing, and customizing motion zones and alerts.
- Test battery and Wi-Fi: Ensure full battery charge and strong signal before final mounting to avoid connection issues.
- Enable two-way audio and motion alerts: Customize settings in the app to get real-time notifications and speak to visitors remotely.
- Maintain regularly: Clean the lens monthly and recharge the battery every 6–12 months depending on usage.
- Troubleshoot common issues: If the doorbell won’t connect or chimes don’t work, check Wi-Fi, battery level, or wiring compatibility.
How to Install Ring Doorbell Plus Battery: A Complete Step-by-Step Guide
Welcome to your complete guide on how to install Ring Doorbell Plus Battery! Whether you’re upgrading your home security or installing your first smart doorbell, the Ring Doorbell Plus Battery offers convenience, clarity, and peace of mind—all without the need for complex wiring. In this detailed walkthrough, we’ll cover everything from unboxing to final setup, ensuring your device works flawlessly from day one.
By the end of this guide, you’ll know exactly where to mount your doorbell, how to secure it properly, how to connect it to your Wi-Fi network, and how to customize settings in the Ring app for the best experience. We’ll also share pro tips, troubleshooting advice, and maintenance reminders to keep your doorbell running smoothly for years.
So grab your tools, charge that battery, and let’s get started!
What You’ll Need Before You Begin
Visual guide about How to Install Ring Doorbell Plus Battery
Image source: androidauthority.com
Before diving into the installation, it’s important to gather all the necessary tools and materials. Having everything ready will save time and prevent frustration mid-process.
Essential Tools and Materials
- Ring Doorbell Plus Battery (with included mounting bracket and screws)
- Fully charged Ring Rechargeable Battery Pack – Make sure it’s charged before installation.
- Smartphone or tablet with the Ring app installed – Download it from the App Store or Google Play.
- Drill with a 3/32” drill bit – For creating pilot holes in wood, brick, or siding.
- Screwdriver (Phillips head) – Most Ring kits include a small one, but a standard screwdriver works better.
- Level – Ensures your doorbell is straight and looks professional.
- Pencil or marker – For marking drill points.
- Measuring tape – Helps position the doorbell at the correct height.
- Optional: Voltage tester – Only if you plan to connect to existing doorbell wiring for trickle charging.
- Optional: Wire strippers and electrical tape – For hardwiring the doorbell (if desired).
Check Your Wi-Fi Signal
A strong Wi-Fi connection is crucial for smooth video streaming, instant alerts, and reliable performance. The Ring Doorbell Plus Battery requires a 2.4 GHz Wi-Fi network (5 GHz is not supported). Before installing, test your Wi-Fi signal at the doorbell location using your phone.
Pro Tip: If your signal is weak, consider installing a Wi-Fi extender or mesh network to boost coverage near your front door.
Charge the Battery Fully
The Ring Doorbell Plus Battery comes with a rechargeable lithium-ion battery pack. Before installation, plug it into the provided USB cable and charge it for at least 4–6 hours. A full charge ensures your doorbell will function immediately after setup and avoids early disconnections.
Step 1: Choose the Perfect Mounting Location
Where you install your Ring Doorbell Plus Battery makes a big difference in performance and usability. A poor location can lead to blind spots, weak Wi-Fi, or difficulty seeing visitors.
Ideal Height and Angle
Mount your doorbell between 4 and 6 feet above the ground. This height allows the camera to capture faces clearly while minimizing glare from the sun or porch lights.
Avoid placing it too high (like near the roof) or too low (near the ground), as this can distort the view or make it easy to tamper with.
Check for Obstructions
Make sure the camera’s field of view isn’t blocked by plants, mailboxes, or decorative items. You want a clear line of sight to your front walkway, driveway, or porch.
Example: If your front door is recessed, angle the doorbell slightly outward to capture the full approach path.
Consider Lighting Conditions
Avoid mounting directly under bright porch lights or in full sun, as this can cause glare or washed-out video. If possible, position the doorbell where it gets even lighting—such as under an eave or shaded area.
Test Wi-Fi Signal at the Location
Walk to your chosen spot with your phone and check the Wi-Fi signal strength. Open the Ring app and use the “Device Health” feature (after initial setup) to monitor signal quality.
If the signal is weak, consider relocating the doorbell or improving your network coverage.
Step 2: Remove Your Old Doorbell (If Applicable)
If you’re replacing an existing doorbell, you’ll need to remove it first. This step is optional if you’re installing on a blank wall.
Turn Off Power (For Hardwired Doorbells)
If your current doorbell is wired, turn off the power at the circuit breaker to avoid electrical shock. Use a voltage tester to confirm the wires are not live.
Unscrew and Disconnect
Use a screwdriver to remove the old doorbell from the wall. Carefully disconnect the wires—note which wire goes where (usually labeled “Front” and “Trans”)—and cap them with wire nuts or electrical tape for safety.
Important: Even if you’re not using the wires, keep them tucked safely inside the wall or junction box.
Patch and Clean the Area
If there are old screw holes or damage, use spackle to fill them. Let it dry, then sand smooth. Wipe the area clean with a damp cloth to remove dust and debris.
Step 3: Install the Mounting Bracket
The mounting bracket is the foundation of your Ring Doorbell installation. It holds the device securely and allows for easy removal when recharging the battery.
Position the Bracket
Hold the mounting bracket against the wall at your chosen location. Use a level to ensure it’s straight. Mark the screw holes with a pencil.
Tip: If mounting on brick or concrete, use a masonry drill bit and wall anchors for a secure fit.
Drill Pilot Holes
Using a 3/32” drill bit, create pilot holes at the marked spots. This prevents the wall from cracking and makes screwing easier.
Secure the Bracket
Align the bracket with the pilot holes and insert the provided screws. Tighten them with a screwdriver until the bracket is snug against the wall. Do not overtighten, as this can damage the plastic.
Optional: Use the Corner or Wedge Kit
If your doorbell is installed at an angle (like on a corner), Ring offers optional mounting kits to improve the camera’s field of view. These kits include angled brackets that adjust the doorbell’s tilt.
Step 4: Connect to Existing Wiring (Optional)
The Ring Doorbell Plus Battery is designed to run on battery power, but you can connect it to existing doorbell wires for trickle charging. This helps extend battery life, especially in high-traffic areas.
Check Wire Compatibility
Ring recommends a voltage between 8V and 24V AC for trickle charging. Use a multimeter or voltage tester to confirm your doorbell transformer meets this range.
Warning: Do not connect to high-voltage systems (like 120V AC). This can damage the doorbell.
Connect the Wires
Thread the existing doorbell wires through the back of the mounting bracket. Loosen the terminal screws on the bracket, insert the wires, and tighten the screws to secure them.
Note: The wires are not polarity-sensitive, so it doesn’t matter which wire goes into which terminal.
Secure the Wires
Tuck any excess wire into the wall or junction box to prevent it from being pinched or damaged.
Step 5: Attach the Ring Doorbell Plus Battery
Now it’s time to mount the actual doorbell unit onto the bracket.
Insert the Battery
Slide the fully charged battery pack into the back of the doorbell until it clicks into place. Make sure it’s seated properly—loose batteries can cause power issues.
Snap the Doorbell onto the Bracket
Align the doorbell with the mounting bracket and press firmly until it clicks. You should hear a secure snap, indicating it’s locked in place.
Pro Tip: Give the doorbell a gentle tug to ensure it’s firmly attached and won’t fall off.
Adjust the Angle (If Needed)
The Ring Doorbell Plus Battery allows for slight angle adjustments. If your view isn’t ideal, you can loosen the bracket screws slightly, tilt the doorbell, and retighten.
Step 6: Set Up the Ring App
The Ring app is your control center for the doorbell. It handles setup, live viewing, motion alerts, and more.
Download and Open the Ring App
If you haven’t already, download the Ring app from the App Store (iOS) or Google Play (Android). Create a Ring account or log in if you already have one.
Start the Setup Process
Tap “Set Up a Device” and select “Doorbells.” Choose “Ring Video Doorbell Plus” from the list.
Scan the QR Code
Use your phone’s camera to scan the QR code on the back of the doorbell or inside the battery compartment. This links the device to your account.
Connect to Wi-Fi
Follow the on-screen prompts to connect your doorbell to your 2.4 GHz Wi-Fi network. Enter your Wi-Fi password carefully—typos are a common cause of setup failure.
Name Your Doorbell
Give your doorbell a name, like “Front Door” or “Main Entrance,” to easily identify it in the app.
Complete the Setup
The app will guide you through final steps, including testing the camera, microphone, and speaker. You’ll also be prompted to enable motion alerts and customize settings.
Step 7: Customize Your Settings
Once your doorbell is online, take time to personalize it for the best experience.
Adjust Motion Zones
In the app, go to Device Settings > Motion Settings > Motion Zones. Draw custom zones to focus on high-traffic areas (like your driveway) and ignore low-priority zones (like a busy street).
Set Motion Sensitivity
Choose from Low, Medium, or High sensitivity. High sensitivity detects smaller movements (like animals), while Low reduces false alerts.
Enable Smart Alerts
Turn on “People Only Mode” to receive notifications only when a person is detected—great for reducing unnecessary alerts from passing cars or trees.
Configure Chime Settings
If you have a Ring Chime or Chime Pro, link it to your doorbell for indoor alerts. You can choose different sounds and volumes.
Enable Two-Way Talk
Test the microphone and speaker to ensure you can hear and speak to visitors clearly. Adjust volume levels in the app if needed.
Step 8: Test Your Doorbell
Before calling the job done, run a few tests to ensure everything works.
Test the Camera
Open the Ring app and tap “Live View” to see the camera feed. Check for clarity, lighting, and field of view.
Test Motion Detection
Walk in front of the doorbell to trigger a motion alert. Confirm you receive a notification on your phone.
Test the Doorbell Button
Press the button on the front of the doorbell. You should hear a chime (if connected) and receive a notification.
Test Two-Way Audio
Press and hold the talk button in the app and speak. Ask someone to listen on the other end to confirm audio quality.
Troubleshooting Common Installation Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Connect to Wi-Fi
- Ensure you’re using a 2.4 GHz network (not 5 GHz).
- Move closer to the router during setup.
- Restart your router and try again.
- Reset the doorbell by holding the orange button for 20 seconds.
Battery Drains Too Fast
- Reduce motion sensitivity or disable motion zones in low-traffic areas.
- Enable “People Only Mode” to reduce false alerts.
- Connect to existing wiring for trickle charging.
- Avoid extreme temperatures, which can affect battery life.
Chime Doesn’t Ring
- Check if the chime is linked to the doorbell in the app.
- Ensure the chime is plugged in and powered.
- Test with a different chime sound to rule out audio issues.
Video Quality Is Poor
- Clean the camera lens with a soft, dry cloth.
- Check for obstructions or glare.
- Ensure strong Wi-Fi signal at the doorbell location.
Doorbell Falls Off the Wall
- Ensure the mounting bracket is securely screwed in.
- Use wall anchors for brick, concrete, or drywall.
- Double-check that the doorbell is fully clicked into the bracket.
Maintenance Tips for Long-Term Performance
To keep your Ring Doorbell Plus Battery in top shape, follow these simple maintenance steps.
Clean the Lens Monthly
Dust, dirt, and fingerprints can blur the camera. Use a microfiber cloth to gently wipe the lens. Avoid harsh chemicals.
Check Battery Level Regularly
The Ring app shows battery percentage. Recharge the battery when it drops below 20%. Most users recharge every 6–12 months, depending on usage.
Update Firmware
Ring automatically pushes firmware updates, but ensure your app and doorbell are connected to Wi-Fi so updates can install.
Inspect Mounting Hardware
Every few months, check that screws are tight and the bracket is secure. Vibration from wind or door slamming can loosen hardware over time.
Final Thoughts: Enjoy Your Smart Home Upgrade
Congratulations! You’ve successfully installed your Ring Doorbell Plus Battery and are now enjoying smarter, safer home security. From choosing the right spot to customizing alerts, you’ve taken full control of your front door monitoring.
Remember, the key to a great experience is proper setup and regular maintenance. Keep the lens clean, the battery charged, and the app updated. And don’t hesitate to explore advanced features like linked devices, shared users, and Alexa integration.
With your Ring Doorbell Plus Battery in place, you’ll never miss a visitor, package, or unexpected guest again. Welcome to the future of home security—simple, reliable, and always on watch.