This guide walks you through relocating your Ring Doorbell Pro to a new spot on your home. You’ll learn how to safely remove it, rewire it, and set it up using the Ring app—no extra hardware needed.
Key Takeaways
- Turn off power first: Always shut off electricity at the breaker before removing or installing your Ring Doorbell Pro to avoid shocks or damage.
- Use existing wiring: The Ring Doorbell Pro works best with existing doorbell wiring that provides 16–24V AC and at least 30VA of power.
- Mounting angle matters: Install the doorbell at a slight downward angle (10–15 degrees) for optimal motion detection and video quality.
- Reconnect via the Ring app: After physical installation, use the Ring app to reconnect your device and adjust settings like motion zones and alerts.
- Test before finalizing: Always test the doorbell’s video, audio, and motion detection after installation to ensure everything works correctly.
- Use a chime kit if needed: If your new location doesn’t have a compatible chime, use the included Pro Power Kit to connect directly to your transformer.
- Keep screws and tools handy: Have a Phillips screwdriver, drill (if needed), and level ready to make the process smooth and secure.
How to Install Ring Doorbell Pro to Another Location
So, you’ve decided to move your Ring Doorbell Pro to a new spot—maybe you’re remodeling, upgrading your entryway, or just realized the current location isn’t capturing visitors properly. No worries! Relocating your Ring Doorbell Pro is totally doable, even if you’re not an electrician. In this guide, we’ll walk you through every step, from safely removing your existing doorbell to setting it up in its new home. Whether you’re moving it just a few feet over or installing it on a completely different door, this guide has you covered.
By the end of this article, you’ll know exactly how to uninstall your Ring Doorbell Pro, prepare the new location, rewire it properly, and reconnect it using the Ring app. We’ll also share pro tips to avoid common mistakes and troubleshoot any issues that pop up. Let’s get started!
Why You Might Want to Move Your Ring Doorbell Pro
Visual guide about How to Install Ring Doorbell Pro to Another Location
Image source: i.ytimg.com
Before we dive into the installation, let’s talk about why people relocate their Ring Doorbell Pro. Understanding your reason can help you choose the best new spot and avoid future problems.
Maybe your current doorbell is mounted too high, making it hard to see faces clearly. Or perhaps it’s angled wrong, so it only catches people walking past instead of approaching the door. Some homeowners find that their doorbell is blocked by a screen door, mailbox, or overgrown bushes. Others are renovating and want the doorbell to match a new door or siding.
Another common reason is poor Wi-Fi signal. If your Ring Doorbell Pro is far from your router, you might experience laggy video or dropped connections. Moving it closer to your Wi-Fi source—or adding a Wi-Fi extender—can solve this.
Whatever your reason, relocating your Ring Doorbell Pro can significantly improve your home security and user experience. Just remember: the new location should still have access to power (via existing wiring) and a strong Wi-Fi signal.
What You’ll Need Before You Start
Before you begin, gather these tools and materials. Having everything ready will save time and prevent frustration.
- Phillips screwdriver: For removing screws from the mounting bracket and doorbell.
- Drill and drill bits (optional): Only if you need to make new holes in the wall or door frame.
- Level: To ensure your doorbell is straight.
- Pencil or marker: For marking drill points.
- Wire strippers (optional): In case you need to trim or re-strip wires.
- Smartphone with the Ring app: Essential for setup and configuration.
- Existing doorbell wiring: Your new location must have low-voltage doorbell wires (typically 16–24V AC).
- Ring Doorbell Pro and included mounting hardware: Including the mounting bracket, screws, and Pro Power Kit.
If your new location doesn’t have existing wiring, you’ll need to run new wires from your doorbell transformer—a job best left to a licensed electrician. The Ring Doorbell Pro is not battery-powered, so it must be hardwired.
Step 1: Turn Off the Power
Safety first! Before touching any wires, you must turn off the power to your doorbell circuit.
Locate Your Breaker Box
Go to your home’s electrical panel (breaker box). Look for the breaker labeled “doorbell,” “chime,” or something similar. If you can’t find it, turn off the main breaker to be safe—but this will cut power to your entire home, so only do this if necessary.
Test the Power
After turning off the breaker, go to your current doorbell and press the button. If the chime doesn’t sound, the power is off. For extra safety, use a non-contact voltage tester on the wires to confirm there’s no electricity flowing.
Never skip this step. Even low-voltage doorbell wires can give a nasty shock or damage your Ring device if handled while live.
Step 2: Remove the Ring Doorbell Pro from Its Current Location
Now that the power is off, it’s time to uninstall your Ring Doorbell Pro.
Unscrew the Mounting Bracket
Use your Phillips screwdriver to remove the two screws on the bottom of the doorbell. These secure the device to the mounting bracket. Gently pull the doorbell away from the wall.
Disconnect the Wires
You’ll see two wires connected to the back of the doorbell—usually labeled “Front” and “Trans.” These are low-voltage wires that carry power from your transformer.
Carefully loosen the terminal screws and remove the wires. Don’t let them fall back into the wall. Use a piece of tape to label them if needed (e.g., “Front” and “Trans”) so you know which is which later.
Remove the Mounting Bracket
Unscrew the mounting bracket from the wall. Set it aside—you’ll reuse it at the new location.
Cap the Wires (Temporarily)
Twist wire nuts onto the exposed ends of the wires to prevent them from touching each other or anything metal. This is just a temporary measure until you’re ready to install at the new spot.
Step 3: Prepare the New Location
Now that your Ring Doorbell Pro is free, it’s time to get the new spot ready.
Check for Wiring
Make sure the new location has existing doorbell wiring. Look for a small hole in the wall or door frame where wires might come through. If there are no wires, you’ll need to run new ones—again, best done by a professional.
Test the Voltage (Optional but Recommended)
Use a multimeter to check the voltage across the wires. The Ring Doorbell Pro requires 16–24V AC and at least 30VA of power. If the voltage is too low, your doorbell may not work properly or could overheat the transformer.
If your existing chime is mechanical (not digital), you may need to install the included Pro Power Kit to ensure stable power. We’ll cover that in Step 5.
Choose the Right Height and Angle
The ideal height for a doorbell is about 48 inches (4 feet) from the ground. This allows most people to be seen clearly in the camera.
Mount the doorbell at a slight downward angle—about 10 to 15 degrees. This helps the motion sensor detect people approaching the door and improves video quality by reducing glare from the sun.
Use your level and pencil to mark where the mounting bracket will go. Make sure the spot is clear of obstructions like trim, mailboxes, or plants.
Step 4: Install the Mounting Bracket at the New Location
With the location marked, it’s time to secure the mounting bracket.
Drill Pilot Holes (If Needed)
If you’re drilling into brick, stucco, or concrete, use a masonry bit to create pilot holes. For wood or siding, a regular drill bit works fine.
Secure the Bracket
Hold the mounting bracket against the wall, aligned with your pencil marks. Use the included screws to attach it securely. Make sure it’s level—this ensures your doorbell sits straight.
Feed the Wires Through
Pull the doorbell wires through the center hole of the mounting bracket. Leave about 6 inches of wire sticking out so you can connect them easily.
Step 5: Connect the Wires and Install the Doorbell
Now it’s time to wire up your Ring Doorbell Pro.
Strip the Wire Ends (If Needed)
If the wire ends are frayed or too short, use wire strippers to expose about 1/4 inch of copper. Be careful not to cut too much insulation.
Connect to the Doorbell
Attach the two wires to the terminal screws on the back of the Ring Doorbell Pro. It doesn’t matter which wire goes where—the device is not polarity-sensitive. Tighten the screws securely.
Attach the Doorbell to the Bracket
Slide the doorbell onto the mounting bracket until it clicks into place. Secure it with the two screws at the bottom.
Install the Pro Power Kit (If Needed)
If your new location has a mechanical chime or you’re unsure about power stability, install the Pro Power Kit. This device connects in line with your doorbell transformer and ensures consistent power delivery.
To install:
- Turn off power at the breaker.
- Locate your doorbell transformer (usually in the basement, attic, or garage).
- Disconnect the wires from the transformer.
- Connect the Pro Power Kit between the transformer and the doorbell wires.
- Follow the included instructions for wiring.
- Turn the power back on.
This step is optional but highly recommended if you experience flickering lights, poor video quality, or frequent disconnections.
Step 6: Reconnect and Set Up in the Ring App
With the hardware installed, it’s time to reconnect your device using the Ring app.
Open the Ring App
Launch the Ring app on your smartphone. Make sure you’re logged into your account.
Put the Doorbell in Setup Mode
Press and hold the orange button on the back of the doorbell for 10 seconds until the light ring flashes white. This puts the device in setup mode.
Add the Device
In the app, tap the three-line menu (☰), then select “Set up a device.” Choose “Doorbells” and follow the on-screen instructions.
The app will search for your doorbell. When it appears, select it and follow the prompts to connect to your Wi-Fi network. Make sure your phone is connected to the same Wi-Fi network you want the doorbell to use.
Complete the Setup
Name your doorbell (e.g., “Front Door” or “Side Entrance”). Choose your time zone, enable motion alerts, and set up motion zones if desired.
You can also adjust settings like:
- Motion sensitivity: High, medium, or low.
- Smart Alerts: Get notified only for people, packages, or vehicles.
- Chime settings: If you have a Ring Chime or Chime Pro, link it here.
Step 7: Test Your Ring Doorbell Pro
Before you call it a day, test everything to make sure it’s working properly.
Check the Video Feed
Open the Ring app and view the live video feed. Make sure the image is clear, the angle is correct, and there’s no glare or obstruction.
Test the Two-Way Audio
Tap the microphone icon and speak. Ask someone to listen at the doorbell to confirm they can hear you. Then have them speak so you can hear them through the app.
Trigger Motion Detection
Walk in front of the doorbell to test motion detection. You should receive a notification in the app and see a recording start.
Press the Doorbell Button
Press the button to test the chime. If you have a Ring Chime, it should ring. If you’re using your existing mechanical chime, it should sound as well.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Power On
- Double-check that the power is on at the breaker.
- Verify the wires are securely connected.
- Test the voltage with a multimeter—should be 16–24V AC.
- Install the Pro Power Kit if voltage is unstable.
Poor Wi-Fi Signal
- Move your router closer or install a Wi-Fi extender.
- Use a Ring Chime Pro, which acts as a Wi-Fi extender.
- Avoid mounting the doorbell behind metal doors or thick walls.
Blurry or Glared Video
- Adjust the mounting angle to reduce sunlight reflection.
- Clean the camera lens with a soft, dry cloth.
- Avoid pointing the camera directly at bright lights or windows.
Motion Alerts Not Working
- Check motion zones in the app—make sure they cover the desired area.
- Increase motion sensitivity.
- Ensure the doorbell isn’t blocked by plants or decorations.
Chime Not Ringing
- If using a mechanical chime, install the Pro Power Kit.
- For Ring Chime, make sure it’s linked in the app and within range.
- Check that the chime is plugged in and powered on.
Pro Tips for a Smooth Installation
Here are some insider tips to make your relocation even easier:
- Take photos before disconnecting wires: Snap a picture of the wiring at the old location so you can reference it later.
- Use wire labels: If you’re unsure which wire is which, label them with tape before removing.
- Install during daylight: Natural light makes it easier to see wires and drill accurately.
- Check local regulations: Some areas require permits for electrical work—check with your city if you’re running new wires.
- Update your Ring app: Make sure you’re using the latest version for the best setup experience.
Conclusion
Relocating your Ring Doorbell Pro doesn’t have to be stressful. With the right tools, a bit of patience, and this step-by-step guide, you can move your doorbell to a better spot and enjoy improved security and performance. Remember to always turn off the power, test your connections, and use the Ring app to finalize the setup.
Whether you’re upgrading your entryway or just optimizing your home security, your Ring Doorbell Pro will work just as well—or better—in its new location. And if you run into any issues, the troubleshooting tips above should help you get back on track quickly.
Now go enjoy your freshly installed Ring Doorbell Pro—and rest easy knowing your home is protected from the best possible angle.