This guide walks you through installing your Ring Doorbell using the Ring Corner Kit for optimal angled placement. You’ll learn how to mount securely, adjust viewing angles, and ensure reliable performance.
Key Takeaways
- Proper angle improves video coverage: The Ring Corner Kit allows you to mount your doorbell at an ideal angle, capturing more of your entryway and reducing blind spots.
- Easy installation with included tools: The kit comes with all necessary mounting hardware and a level tool, making setup straightforward even for beginners.
- Compatible with most Ring models: The Corner Kit works with Ring Video Doorbell (2nd Gen), Ring Video Doorbell 3, 3 Plus, 4, and Ring Video Doorbell Pro.
- Enhanced security and deterrence: A well-placed doorbell deters package thieves and improves motion detection accuracy.
- Wiring or battery options supported: You can install the Corner Kit whether your Ring Doorbell is hardwired or battery-powered.
- Weather-resistant design: The kit is built to withstand outdoor conditions, ensuring long-term durability.
- Adjustable viewing angle up to 45 degrees: Fine-tune your doorbell’s field of view to cover driveways, sidewalks, or side entrances.
How to Install Ring Doorbell with Ring Corner Kit
Installing a Ring Doorbell is a smart way to boost your home security, but standard flat mounting doesn’t always give you the best view—especially if your door is set back or your entryway is at an angle. That’s where the Ring Corner Kit comes in. This accessory lets you mount your Ring Doorbell at an angle, improving video coverage and reducing blind spots.
In this guide, we’ll walk you through every step of installing your Ring Doorbell using the Ring Corner Kit. Whether you’re a DIY beginner or a seasoned home improver, you’ll find clear, easy-to-follow instructions. We’ll cover tools needed, mounting tips, wiring (if applicable), and how to test your setup. By the end, your doorbell will be securely mounted and perfectly positioned to monitor your home.
Let’s get started!
What Is the Ring Corner Kit?
Visual guide about How to Install Ring Doorbell with Ring Corner Kit
Image source: images.ctfassets.net
The Ring Corner Kit is an optional mounting accessory designed to help you install your Ring Doorbell at an angle—typically between 15 and 45 degrees. It’s especially useful when your front door is recessed, set back from the sidewalk, or located on a corner where a flat mount would leave large blind spots.
The kit includes:
– A corner mounting bracket
– Screws and anchors
– A built-in level for accurate alignment
– A template sticker for drilling
– A wedge spacer (for fine-tuning the angle)
It’s compatible with several Ring models, including:
– Ring Video Doorbell (2nd Gen)
– Ring Video Doorbell 3
– Ring Video Doorbell 3 Plus
– Ring Video Doorbell 4
– Ring Video Doorbell Pro
Using the Corner Kit ensures your camera captures a wider field of view, making it easier to spot visitors, deliveries, or suspicious activity.
Tools and Materials You’ll Need
Before you begin, gather the following tools and materials. Most are included in the kit, but it’s good to have extras on hand.
Included in the Ring Corner Kit
- Corner mounting bracket
- Screws and wall anchors
- Mounting template sticker
- Built-in level
- Wedge spacer (for angle adjustment)
Tools You’ll Need (Not Included)
- Power drill with drill bits (typically 3/16” for masonry or 1/8” for wood)
- Screwdriver (Phillips head)
- Pencil or marker
- Measuring tape
- Level (optional, but helpful)
- Wire strippers (if hardwiring)
- Voltage tester (if hardwiring)
- Safety glasses
Optional Tools for Hardwiring
- Wire nuts
- Electrical tape
- Fish tape (for running wires through walls)
- Drill extension bit (for tight spaces)
Having everything ready before you start saves time and prevents mid-installation trips to the hardware store.
Step 1: Choose the Right Location
Picking the perfect spot for your Ring Doorbell is crucial. The goal is to capture the entire entryway, including the walkway, porch, and any side areas where packages might be left.
Ideal Placement Guidelines
- Height: Mount the doorbell 48 inches (4 feet) above the ground. This is the recommended height for optimal motion detection and video quality.
- Angle: Use the Corner Kit to tilt the doorbell toward the area you want to monitor. For example, if your door is recessed, angle it outward to capture the sidewalk.
- Clear Line of Sight: Avoid placing the doorbell behind plants, mailboxes, or other obstructions.
- Wi-Fi Signal: Ensure the location has strong Wi-Fi coverage. Weak signals can cause video lag or disconnections.
- Power Source: If hardwiring, make sure existing doorbell wires are accessible and functional.
Test the View Before Drilling
Use the Ring app to preview the camera’s field of view. Temporarily hold the doorbell in place and open the app to see what it captures. Adjust the position until you’re happy with the coverage.
Step 2: Prepare for Installation
Once you’ve chosen the location, it’s time to prepare for mounting. This step ensures a clean, secure installation.
Turn Off Power (If Hardwiring)
If you’re replacing an existing wired doorbell, turn off the power at the circuit breaker. Use a voltage tester to confirm the wires are not live. Safety first!
Remove Old Doorbell (If Applicable)
Unscrew and remove your old doorbell. Disconnect the wires and cap them with wire nuts if you’re not using them immediately. Label the wires (e.g., “Front” and “Transformer”) to avoid confusion later.
Clean the Mounting Surface
Wipe the wall or door frame with a damp cloth to remove dirt, dust, or grease. A clean surface helps the mounting bracket adhere better and ensures a secure fit.
Check for Obstructions
Look behind the wall (if possible) for electrical wires, pipes, or studs. Use a stud finder if needed. Avoid drilling into anything that could cause damage or safety hazards.
Step 3: Use the Mounting Template
The Ring Corner Kit includes a paper template sticker that makes drilling precise and easy.
Apply the Template
Peel the backing off the template sticker and place it on the wall at your chosen location. Make sure it’s level using the built-in level on the bracket or a separate level tool.
Mark the Drill Points
Use a pencil to mark the center of each screw hole through the template. Double-check alignment before drilling.
Remove the Template
Carefully peel off the template. You should now have two clear drill marks on the wall.
Step 4: Drill Pilot Holes
Drilling pilot holes ensures the screws go in smoothly and prevents wall damage.
Choose the Right Drill Bit
- For wood or siding: Use a 1/8” drill bit.
- For brick, concrete, or stucco: Use a 3/16” masonry bit.
Drill the Holes
Put on safety glasses and drill straight into each marked spot. Drill to a depth of about 1.5 inches to accommodate the wall anchors.
Insert Wall Anchors
If you’re mounting into brick, concrete, or drywall, insert the included plastic wall anchors into the holes. Tap them gently with a hammer until flush with the wall.
Step 5: Attach the Corner Mounting Bracket
Now it’s time to secure the corner bracket to the wall.
Position the Bracket
Hold the corner mounting bracket over the drill holes. Make sure the built-in level shows it’s straight.
Secure with Screws
Insert the screws through the bracket and into the wall anchors. Tighten them with a screwdriver or drill (on low torque) until the bracket is snug. Don’t overtighten, as this can crack the bracket or wall.
Check the Angle
The bracket should now be angled outward. Use the built-in level to confirm it’s properly aligned. If needed, adjust slightly before fully tightening the screws.
Step 6: Install the Wedge Spacer (Optional)
The wedge spacer allows you to fine-tune the angle of your Ring Doorbell for even better coverage.
When to Use the Wedge
Use the wedge if you need a slight upward or downward tilt beyond what the corner bracket provides. For example, if your porch is slightly elevated, the wedge can help aim the camera downward.
Attach the Wedge
Place the wedge between the corner bracket and the doorbell mounting plate. Secure it with the provided screw. The wedge adds about 5–10 degrees of additional angle.
Test the View
Temporarily attach your Ring Doorbell and check the view in the app. Adjust the wedge or bracket if needed.
Step 7: Connect the Wiring (If Hardwiring)
If your Ring Doorbell is hardwired, now’s the time to connect the wires.
Strip the Wires
Use wire strippers to remove about 1/4 inch of insulation from the ends of the doorbell wires.
Connect to the Doorbell
Attach the wires to the terminals on the back of your Ring Doorbell. Most models have labeled terminals (e.g., “Front” and “Transformer”). Tighten the screws to secure the connections.
Secure the Wires
Tuck the wires neatly into the wall or use wire clips to keep them out of the way. Avoid pinching or bending them sharply.
Turn Power Back On
Once connected, turn the power back on at the circuit breaker. Test the doorbell to ensure it powers up.
Step 8: Mount the Ring Doorbell
With the bracket and wiring ready, it’s time to attach your doorbell.
Align the Mounting Plate
Slide the mounting plate onto the corner bracket. Make sure it clicks into place securely.
Secure with Screw
Use the security screw (included with your Ring Doorbell) to lock the plate in place. This prevents theft and ensures stability.
Attach the Doorbell
Snap your Ring Doorbell onto the mounting plate. You should hear a click when it’s properly seated.
Step 9: Test the Installation
Before calling it done, test everything to make sure it’s working correctly.
Check the Video Feed
Open the Ring app and view the live feed. Make sure the image is clear, the angle is correct, and there are no obstructions.
Test Motion Detection
Walk in front of the doorbell to trigger motion alerts. Confirm you receive notifications on your phone.
Verify Two-Way Audio
Press the talk button in the app and speak. Ask someone nearby to listen. Adjust the volume if needed.
Check Night Vision
Turn off the lights and check the night vision feed. Look for clear, well-lit images without glare or shadows.
Step 10: Final Adjustments
Small tweaks can make a big difference in performance.
Fine-Tune the Angle
If the view isn’t perfect, loosen the bracket screws slightly and adjust the angle. Retighten once satisfied.
Secure Loose Wires
Use cable clips or conduit to organize and protect any exposed wires.
Apply Weather Seal (Optional)
For extra protection, apply a small bead of silicone sealant around the edges of the mounting bracket. This prevents water from seeping behind the wall.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix them.
Doorbell Won’t Power On
- Check the circuit breaker—make sure power is on.
- Verify wire connections are tight and correct.
- Test the voltage with a multimeter (should be 8–24V AC).
- If using a battery, ensure it’s fully charged.
Poor Wi-Fi Signal
- Move your router closer or use a Wi-Fi extender.
- Reduce interference from microwaves, cordless phones, or thick walls.
- Check the signal strength in the Ring app under Device Health.
Blurry or Dark Video
- Clean the camera lens with a microfiber cloth.
- Adjust the angle to avoid direct sunlight or bright lights.
- Enable HDR in the app settings for better contrast.
Motion Alerts Not Working
- Check motion zones in the app—adjust sensitivity and zones.
- Ensure the doorbell is not facing a busy street or tree (causing false alerts).
- Update the Ring app and firmware.
Loose or Wobbly Mount
- Tighten all screws on the bracket and mounting plate.
- Ensure wall anchors are fully seated.
- Use longer screws if the wall is uneven or soft.
Maintenance Tips for Long-Term Performance
To keep your Ring Doorbell working smoothly, follow these maintenance tips.
Clean the Lens Monthly
Dust, dirt, and bugs can blur the camera. Wipe the lens gently with a soft, dry cloth.
Check for Firmware Updates
Open the Ring app regularly to check for updates. Updated firmware improves performance and security.
Inspect the Mounting
Every few months, check that the bracket and screws are tight. Weather and vibration can loosen them over time.
Test the Battery (If Applicable)
If using a battery-powered model, check the charge level in the app. Replace or recharge as needed.
Review Motion Settings
Adjust motion zones and sensitivity based on seasonal changes (e.g., falling leaves in autumn).
Conclusion
Installing your Ring Doorbell with the Ring Corner Kit is a smart upgrade that enhances your home’s security and video coverage. By following this step-by-step guide, you’ve learned how to choose the right location, use the mounting template, drill securely, connect wiring (if needed), and fine-tune the angle for the best view.
The Corner Kit solves common mounting challenges, especially for angled or recessed doors, and ensures your doorbell captures everything that matters. With proper installation and regular maintenance, your Ring Doorbell will provide reliable protection for years to come.
Remember: a well-placed doorbell isn’t just about seeing who’s at the door—it’s about peace of mind. Whether you’re watching for packages, greeting guests, or deterring intruders, your Ring Doorbell is now perfectly positioned to do its job.
Now that you’re all set, enjoy the added security and convenience that comes with smart home technology. Welcome to the future of home protection!