Installing a wedge mount on your Ring Doorbell improves camera angle and motion detection. This guide walks you through the process with clear steps, tools, and troubleshooting tips.
Key Takeaways
- Wedge mounts adjust camera angle: They tilt your Ring Doorbell downward for better coverage of walkways and driveways.
- Compatible with most Ring models: Works with Ring Video Doorbell (2nd Gen), Pro, Pro 2, and Battery versions.
- Easy DIY installation: No special skills needed—just basic tools and 15–20 minutes of your time.
- Improves motion detection: Proper angle reduces false alerts and captures visitors more accurately.
- Weather-resistant design: Made from durable materials to withstand rain, snow, and sun.
- Secure mounting required: Always turn off power and use proper screws to avoid damage or injury.
- Test after installation: Use the Ring app to check view and adjust as needed.
How to Install Wedge Mount on Ring Doorbell
If you’ve ever opened your Ring app and noticed that your front door view is too high, too low, or missing key areas like your walkway or porch steps, you’re not alone. Many Ring Doorbell users struggle with camera angles that don’t capture the full picture. That’s where the wedge mount comes in.
A wedge mount is a simple but powerful accessory that changes the angle of your Ring Doorbell. It’s designed to tilt the camera downward, giving you a better view of people approaching your door, packages left on the porch, or motion in your driveway. Whether you have a Ring Video Doorbell (2nd Gen), Ring Doorbell Pro, Pro 2, or even the battery-powered version, a wedge mount can significantly improve your home security setup.
In this guide, you’ll learn exactly how to install a wedge mount on your Ring Doorbell. We’ll walk you through every step—from choosing the right wedge mount to securing it safely and testing the final view. You’ll also get practical tips, troubleshooting advice, and answers to common questions. By the end, your Ring Doorbell will be perfectly positioned to keep your home safe and your footage clear.
Let’s get started!
What Is a Wedge Mount and Why Do You Need One?
Visual guide about How to Install Wedge Mount on Ring Doorbell
Image source: i.stack.imgur.com
Before diving into the installation, it’s important to understand what a wedge mount is and why it’s useful.
A wedge mount is a small, angled bracket that attaches between your Ring Doorbell and the wall. It’s shaped like a triangle or wedge, which is where it gets its name. When installed, it tilts the doorbell downward, usually by 5 to 15 degrees, depending on the model.
Most Ring Doorbells come with a flat mounting plate. While this works fine for some homes, it often results in a camera view that’s too high—capturing the sky or roof instead of the front walkway. This can lead to missed motion events, poor facial recognition, and difficulty seeing packages or visitors.
With a wedge mount, you can:
- Lower the camera angle to focus on the ground and walkway
- Reduce false alerts from passing cars or tree branches
- Improve video quality by capturing faces and license plates
- Customize the view based on your home’s layout
For example, if your front door is elevated or your driveway slopes downward, a wedge mount helps ensure that motion sensors detect people walking up to your door—not just their legs or shoes.
Wedge mounts are especially helpful if:
- Your doorbell is mounted high on the wall
- You have a porch or steps in front of your door
- You want to monitor a driveway or side path
- You’ve noticed gaps in your motion detection
Ring offers official wedge mounts, but third-party options are also available. Just make sure they’re compatible with your specific Ring model and made from weather-resistant materials.
Tools and Materials You’ll Need
Installing a wedge mount is a straightforward DIY project. You don’t need to be a handyman or call a professional. With the right tools and a little patience, you can do it yourself in under 20 minutes.
Here’s what you’ll need:
Essential Tools
- Phillips-head screwdriver: For removing the old mount and securing the new one.
- Drill (optional): Only if you need to create new pilot holes or if your wall is particularly hard.
- Level: To ensure your wedge mount is installed straight.
- Pencil or marker: For marking screw positions.
- Measuring tape: To check height and alignment.
Materials
- Wedge mount kit: Includes the wedge bracket, screws, and sometimes anchors.
- Wall anchors (if needed): For drywall, brick, or other surfaces that require extra support.
- Electrical tape (for wired models): To safely cap wires during installation.
Safety Gear
- Safety glasses: Protect your eyes when drilling or handling screws.
- Gloves: Optional, but helpful for grip and protection.
If you’re installing a wired Ring Doorbell (like the Pro or Pro 2), you’ll also need to turn off the power at the breaker box. This is a critical safety step to avoid electric shock.
For battery-powered models (like the standard Ring Doorbell), you can skip the power-off step, but it’s still a good idea to remove the battery before starting.
Step-by-Step Installation Guide
Now that you have your tools ready, let’s walk through the installation process. We’ll cover both wired and battery-powered models, so you can follow along no matter which Ring Doorbell you have.
Step 1: Choose the Right Wedge Mount
Not all wedge mounts are created equal. Before you begin, make sure you have the correct model for your Ring Doorbell.
Ring offers two main types of wedge mounts:
- Standard Wedge Mount: Tilts the camera downward by about 5–10 degrees. Best for minor adjustments.
- Adjustable Wedge Mount: Allows you to fine-tune the angle. Great for custom setups.
Check the packaging or product description to confirm compatibility. Most wedge mounts work with:
- Ring Video Doorbell (2nd Gen)
- Ring Doorbell Pro
- Ring Doorbell Pro 2
- Ring Doorbell (Battery)
Avoid using wedge mounts designed for other brands, as they may not fit securely or could damage your doorbell.
Step 2: Turn Off Power (For Wired Models Only)
If you’re installing a wired Ring Doorbell, safety comes first.
1. Go to your home’s electrical panel (breaker box).
2. Locate the circuit that powers your doorbell. It’s often labeled “doorbell” or “chime.”
3. Turn off the breaker to cut power to the doorbell.
4. Test the doorbell button to make sure it’s not working. If it still rings, turn off additional breakers until it stops.
Never skip this step. Working with live wires can cause serious injury.
Step 3: Remove the Existing Doorbell
Now it’s time to take down your current Ring Doorbell.
1. Unscrew the two security screws on the bottom of the doorbell using a Phillips-head screwdriver. These screws prevent tampering, so you’ll need to remove them to take the device off.
2. Gently pull the doorbell away from the wall. If it’s wired, the wires will still be connected.
3. For wired models: Carefully disconnect the wires. Twist the wire nuts counterclockwise and pull the wires free. Wrap the exposed ends with electrical tape to prevent short circuits.
4. For battery models: Simply remove the doorbell from the mounting plate.
Set the doorbell aside in a safe place.
Step 4: Remove the Old Mounting Plate
The next step is to remove the flat mounting plate that came with your Ring Doorbell.
1. Unscrew the two screws holding the mounting plate to the wall.
2. Pull the plate away from the wall.
3. If there are wires behind it (for wired models), gently pull them through the wall opening.
You should now have a clean wall surface with exposed wires (if applicable) and two screw holes.
Step 5: Position the Wedge Mount
Now it’s time to install the wedge mount.
1. Hold the wedge mount against the wall, aligning it with the existing screw holes.
2. Use a pencil to mark the positions of the screw holes on the wall.
3. Check the angle: The wedge should tilt the doorbell downward. Make sure it’s facing the right direction.
4. Use a level to ensure the mount is straight. Even a small tilt can affect the camera view.
If your wall is uneven or the existing holes don’t align, you may need to drill new pilot holes. Use a drill bit slightly smaller than your screws to avoid splitting the material.
Step 6: Secure the Wedge Mount
Once the mount is positioned correctly, it’s time to attach it.
1. Insert the screws through the wedge mount and into the wall.
2. Tighten them with a screwdriver. Don’t over-tighten, as this can crack the mount or damage the wall.
3. If you’re mounting into drywall or brick, use wall anchors for extra support. Insert the anchor into the hole first, then screw into it.
For brick or concrete walls, use a masonry drill bit and plastic anchors. For wood or siding, standard screws usually work fine.
Step 7: Reconnect Wires (For Wired Models)
If you have a wired Ring Doorbell, reconnect the wires to the new mount.
1. Feed the wires through the center hole of the wedge mount.
2. Strip about 1/4 inch of insulation from the wire ends if needed.
3. Connect the wires to the terminals on the back of the Ring Doorbell. It doesn’t matter which wire goes where—Ring uses a two-wire system with no polarity.
4. Secure the connections with wire nuts and wrap with electrical tape.
Step 8: Attach the Ring Doorbell
Now it’s time to mount your Ring Doorbell onto the wedge mount.
1. Align the doorbell with the mounting bracket on the wedge.
2. Slide it into place until it clicks.
3. Insert the two security screws into the bottom of the doorbell and tighten them with a screwdriver.
Make sure the doorbell is secure and doesn’t wobble.
Step 9: Restore Power and Test
If you turned off the power earlier, now’s the time to turn it back on.
1. Go to the breaker box and flip the doorbell circuit back on.
2. Wait a few seconds for the doorbell to power up.
3. Open the Ring app on your phone.
4. Tap the device icon and select your doorbell.
5. Check the live view to see the new camera angle.
You should now see a lower, more focused view of your front area. If the angle isn’t quite right, you may need to adjust the wedge mount or try a different model.
Tips for the Best Results
Installing a wedge mount is simple, but a few extra tips can help you get the best possible view.
Choose the Right Angle
Not all homes need the same tilt. Consider your layout:
- If your door is high up, use a steeper wedge (10–15 degrees).
- If you have a flat porch, a gentle 5-degree tilt may be enough.
- Test different angles using the Ring app’s live view before finalizing.
Use the Ring App to Fine-Tune
The Ring app has a feature called “Motion Zones” that lets you customize where the camera detects motion. After installing the wedge mount:
- Open the app and go to Device Settings > Motion Settings.
- Adjust the zones to focus on your walkway or driveway.
- Turn off areas like the street or neighbor’s yard to reduce false alerts.
Keep It Clean
Dust, dirt, and spider webs can block the camera lens. Clean the lens gently with a microfiber cloth every few weeks. Avoid using water or cleaning sprays directly on the device.
Check for Obstructions
Make sure the wedge mount doesn’t block the camera’s field of view. Look for:
- Overhanging eaves or gutters
- Plants or decorations
- Light fixtures that cast shadows
Trim back any branches or move objects that interfere with the view.
Troubleshooting Common Issues
Even with careful installation, you might run into a few problems. Here’s how to fix them.
Doorbell Won’t Power On
- Check that the breaker is turned on.
- Ensure wires are securely connected.
- Test the doorbell with a multimeter if you’re comfortable doing so.
Camera View Is Still Too High
- Try a steeper wedge mount.
- Reposition the entire mount lower on the wall.
- Use an adjustable wedge for fine control.
Doorbell Wobbles or Feels Loose
- Tighten the security screws.
- Check that the wedge mount is securely attached to the wall.
- Use longer screws or wall anchors if needed.
Motion Detection Is Still Poor
- Adjust motion zones in the Ring app.
- Ensure the camera isn’t pointed at moving trees or shadows.
- Clean the lens and PIR sensor (the small black dot on the front).
Wires Are Too Short
- Use wire extenders or relocate the transformer.
- Consider switching to a battery-powered model if rewiring isn’t feasible.
Conclusion
Installing a wedge mount on your Ring Doorbell is a quick and effective way to improve your home security. By adjusting the camera angle, you get better coverage of your front entrance, fewer false alerts, and clearer footage of visitors and packages.
The process is simple: choose the right mount, turn off power (if needed), remove the old plate, install the wedge, reconnect wires, and test the view. With the right tools and a little patience, anyone can do it.
Remember to use the Ring app to fine-tune your settings and keep your device clean for the best performance. And if you run into issues, don’t hesitate to consult the troubleshooting tips or reach out to Ring support.
A well-angled doorbell isn’t just about convenience—it’s about peace of mind. With your new wedge mount in place, you’ll always know who’s at the door.