How to Link 2 Ring Doorbells Together - Doorbell Troubleshooting

This guide walks you through how to link 2 Ring doorbells together so you can monitor multiple entry points from one app. You’ll learn setup steps, syncing tips, and how to avoid common issues.

Key Takeaways

Linking 2 Ring doorbells allows centralized monitoring: View both devices in the Ring app for full coverage of your home’s entrances.
Each doorbell must be set up individually first: Complete the initial installation and Wi-Fi connection for each device before linking.
Use the same Ring account for both devices: Both doorbells must be registered under one account to appear together in the app.
Ensure strong Wi-Fi signal at both locations: Weak signals can cause lag or disconnections, especially with video streaming.
Name your devices clearly for easy identification: Use descriptive names like “Front Door” and “Back Door” to avoid confusion.
Enable motion zones and alerts for both units: Customize settings so you’re only notified when needed.
Troubleshoot sync issues with a power cycle: If devices don’t appear together, restart them and check app updates.

Introduction: Why Link Two Ring Doorbells Together?

If you have more than one entrance to your home—like a front door, back door, or side gate—you know how important it is to keep an eye on all of them. That’s where linking two Ring doorbells comes in handy. By connecting multiple Ring devices to a single account, you can monitor every entry point from one convenient app, receive alerts no matter where motion is detected, and even communicate with visitors from anywhere.

Linking two Ring doorbells isn’t about creating a single “network” between the devices themselves. Instead, it’s about managing both units through the same Ring app on your smartphone or tablet. This gives you a unified security dashboard, making it easier to stay informed and respond quickly.

In this guide, we’ll walk you through how to link 2 Ring doorbells together step by step. Whether you’re setting up a second doorbell for the first time or adding an existing one to your current system, we’ve got you covered. You’ll learn how to install, sync, customize, and troubleshoot your devices so they work seamlessly side by side.

By the end, you’ll have a smarter, more secure home—without the hassle of juggling multiple apps or missing important alerts.

What You’ll Need Before You Start

Visual guide about How to Link 2 Ring Doorbells Together

Image source: gigasecurehome.com

Before diving into the setup process, make sure you have everything ready. Having the right tools and information upfront will save you time and frustration.

Required Items

Two Ring doorbells: Compatible models include Ring Video Doorbell, Ring Doorbell 2, Ring Doorbell 3, Ring Doorbell 4, Ring Doorbell Pro, Ring Doorbell Pro 2, Ring Video Doorbell Wired, and Ring Video Doorbell Elite.
Smartphone or tablet: With the latest version of the Ring app installed (available on iOS and Android).
Wi-Fi network: A stable 2.4 GHz or 5 GHz connection (depending on your model). Note: Some older Ring models only support 2.4 GHz.
Power source: Hardwired connection or fully charged battery for each doorbell.
Basic tools: Screwdriver, drill (if mounting), and possibly a voltage tester (for hardwired models).
Your Ring account credentials: Email and password used to log into the Ring app.

Optional but Helpful

Wi-Fi extender: If one doorbell is far from your router, a range extender can boost signal strength.
Level tool: To ensure your doorbell is mounted straight.
Smartphone stand or tripod: Useful during setup if you’re following along on your phone.

Check Compatibility

Most Ring doorbell models work together under one account. However, if you’re using very old or third-party devices, double-check compatibility on the Ring support website. As of 2024, all current Ring doorbells are designed to coexist on the same account.

Step 1: Install the First Ring Doorbell

If you haven’t already set up your first doorbell, start here. Even if it’s already installed, it’s good to confirm it’s working properly before adding a second.

Choose the Right Location

Pick a spot about 4–5 feet above the ground, angled slightly toward the walkway. Avoid placing it directly under bright lights or in areas with heavy sun exposure, which can cause glare or false motion alerts.

Mount the Doorbell

Turn off power at the breaker if hardwiring.
Remove your existing doorbell (if applicable).
Use the mounting bracket and screws provided to secure the doorbell to the wall.
Connect wires (for hardwired models) or insert the battery (for battery-powered models).
Attach the faceplate and ensure it’s snug.

Connect to Wi-Fi via the Ring App

Open the Ring app on your smartphone.
Tap the three-line menu (☰) and select “Set Up a Device.”
Choose “Doorbells” and follow the on-screen prompts.
Scan the QR code on the back of your doorbell or enter the serial number manually.
Select your Wi-Fi network and enter the password.
Wait for the app to confirm a successful connection.

Test the First Doorbell

Once connected, test the live view, motion detection, and two-way audio. Make sure you receive notifications when motion is detected. If everything works, you’re ready to add the second doorbell.

Step 2: Install the Second Ring Doorbell

Now it’s time to set up your second doorbell. The process is nearly identical, but pay extra attention to naming and placement.

Select the Second Location

Choose a second entry point—like a back door, side gate, or garage entrance. Ensure it’s within Wi-Fi range or use a Wi-Fi extender if needed.

Mount and Power the Second Unit

Follow the same mounting steps as the first doorbell. If using batteries, make sure they’re fully charged. For hardwired models, confirm voltage compatibility (Ring recommends 8–24V AC).

Connect the Second Doorbell to Wi-Fi

Open the Ring app.
Tap “Set Up a Device” again.
Select “Doorbells” and scan the QR code on the second unit.
Choose the same Wi-Fi network (or a different one if preferred).
Enter the password and wait for confirmation.

Name Your Second Doorbell Clearly

This is crucial. When prompted, give your second doorbell a descriptive name like “Back Door,” “Side Gate,” or “Garage Entrance.” Avoid generic names like “Doorbell 2,” which can cause confusion later.

Step 3: Link Both Doorbells in the Ring App

Now that both doorbells are installed and connected to Wi-Fi, it’s time to link them together in the app. This step ensures they appear side by side for easy monitoring.

Log Into the Same Ring Account

Both doorbells must be registered under the same Ring account. If you used different emails during setup, log out and back in with the primary account.

Verify Both Devices Appear in the App

Open the Ring app.
Tap the dashboard (home screen).
You should see both doorbells listed with their assigned names.
If one is missing, tap “Add a Device” and re-scan the QR code.

Enable Device Syncing (Automatic)

Ring automatically syncs devices under the same account. There’s no separate “link” button—once both are added, they’re linked by default.

Customize Device Settings

Now that both are visible, personalize each one:

Motion Zones: Define areas where you want alerts (e.g., driveway but not street).
Alert Schedules: Set quiet hours or disable alerts at night.
Video Quality: Adjust based on your Wi-Fi strength.
Two-Way Talk: Test audio clarity for both units.

Step 4: Optimize Performance for Both Doorbells

Linking is just the start. To get the best experience, optimize settings for reliability and usability.

Ensure Strong Wi-Fi Signal

Weak signal = laggy video and missed alerts. Use the Ring app’s “Device Health” feature to check signal strength. If below 70%, consider:

Moving your router closer.
Using a Wi-Fi extender.
Switching to a mesh network system.

Use Descriptive Names and Icons

In the Ring app, tap each device, go to “Device Settings,” and assign a custom icon (e.g., front door, back door). This helps you quickly identify which doorbell triggered an alert.

Set Up Shared Access (Optional)

If family members or roommates need access:

Go to “More” > “Shared Users.”
Tap “Add Shared User” and enter their email.
Choose permissions (view only or full control).

Now everyone can see both doorbells in their app.

Enable Linked Alerts (Pro Feature)

With a Ring Protect Plan, you can receive alerts from both devices in one notification stream. This reduces app clutter and ensures you never miss an event.

Step 5: Test the Linked System

Before considering the job done, test everything thoroughly.

Test Live View

Open the Ring app and tap each doorbell to view live footage. Check for clarity, lag, and audio sync.

Trigger Motion on Both Units

Walk in front of each doorbell to trigger motion alerts. Confirm you receive notifications for both, with correct device names.

Test Two-Way Communication

Speak through the app and listen for clear audio. Ask someone to respond from the doorbell speaker.

Check Recording Playback

If you have a Ring Protect Plan, review recent recordings to ensure both devices are saving clips properly.

Troubleshooting Common Issues

Even with careful setup, problems can arise. Here’s how to fix the most common ones.

Second Doorbell Not Appearing in App

Ensure it’s connected to Wi-Fi (check Device Health).
Re-scan the QR code and re-add the device.
Log out and back into your Ring account.
Restart your phone and router.

Weak Signal or Frequent Disconnects

Move the doorbell closer to the router.
Use a Wi-Fi extender or powerline adapter.
Switch from 5 GHz to 2.4 GHz (if supported).
Reduce interference from microwaves, cordless phones, or thick walls.

Delayed or Missed Alerts

Check motion sensitivity settings—too low may miss events.
Ensure your phone isn’t in Do Not Disturb mode.
Update the Ring app and device firmware.
Restart the doorbell by removing and reinserting the battery (or cycling power).

Audio or Video Quality Issues

Clean the camera lens and microphone.
Adjust video quality in settings (lower if bandwidth is limited).
Check for obstructions (e.g., overgrown plants, dirt).
Ensure the doorbell is securely mounted—vibration can affect audio.

Devices Not Syncing Properly

Confirm both are on the same Ring account.
Delete and re-add the problematic device.
Contact Ring Support if issues persist.

Advanced Tips for Managing Multiple Doorbells

Once your system is running smoothly, consider these pro tips to get even more value.

Use Motion Schedules

Set different alert times for each doorbell. For example, disable motion alerts at the back door during nighttime hours if it’s near a busy street.

Create Custom Motion Zones

Draw zones around your porch but exclude the sidewalk. This reduces false alerts from passing cars or pedestrians.

Integrate with Other Smart Home Devices

Link your Ring doorbells with Alexa, Google Home, or smart lights. For example:

Say “Alexa, show me the front door” to view live feed on an Echo Show.
Set lights to turn on when motion is detected.

Use Ring Chime or Chime Pro

If you want audible alerts inside your home, pair a Ring Chime with your system. It will ring when either doorbell is pressed.

Monitor Battery Levels

For battery-powered models, check charge levels monthly. Enable low-battery alerts in the app so you’re reminded to recharge.

Regular Maintenance

Clean lenses and sensors every few months.
Update firmware when prompted.
Check mounting screws for tightness.

Conclusion: Enjoy Seamless Security with Linked Ring Doorbells

Linking two Ring doorbells together is a smart way to enhance your home security. By following this guide, you’ve learned how to install, connect, and manage multiple devices from a single app. You now have full visibility of your home’s entrances, customizable alerts, and peace of mind—no matter where you are.

Remember, the key to success is careful setup, strong Wi-Fi, and clear naming. With both doorbells working in harmony, you’ll never miss a visitor, package, or unexpected event again.

Whether you’re watching your front porch or keeping an eye on the back gate, your linked Ring system puts control in your hands. So go ahead—enjoy the convenience, stay informed, and feel confident knowing your home is protected from every angle.

And if you ever run into issues, don’t hesitate to revisit this guide or reach out to Ring Support. Happy monitoring!