Make your Echo Show automatically display your Ring Doorbell feed for instant, hands-free monitoring by enabling the Ring skill in the Alexa app and linking your accounts. Once set up, the Echo Show will instantly show live video whenever someone rings the doorbell or triggers motion alerts, ensuring you never miss a visitor—no manual commands needed.
Key Takeaways
- Link Ring and Alexa apps: Connect your Ring account to Alexa for seamless integration.
- Enable Ring skill in Alexa: Activate the Ring skill to allow doorbell alerts on Echo Show.
- Set up Announcements: Turn on doorbell announcements so Echo Show displays video automatically.
- Use compatible Echo Show: Ensure your device supports video feeds from Ring doorbells.
- Check motion and ring settings: Customize alerts to trigger only for doorbell rings or motion.
- Keep devices updated: Regularly update firmware for reliable performance and new features.
Why This Matters / Understanding the Problem
Let’s be real—you’ve probably been there. You’re in the middle of cooking dinner, hands covered in flour, and your phone buzzes with a Ring notification. Someone’s at the door. But by the time you wipe your hands, grab your phone, and open the app, they’re already walking away.
That’s frustrating, right? You bought a smart doorbell for peace of mind, not to play digital hide-and-seek with delivery drivers or neighbors dropping off packages. And if you’ve got an Echo Show sitting on your kitchen counter or living room shelf, you’re sitting on a goldmine of convenience—just waiting to be unlocked.
The good news? You can make your Echo Show automatically display your Ring doorbell feed the moment someone presses the button. No more fumbling with phones or missing important visitors. This setup turns your Echo Show into a real-time front-door monitor, giving you instant visual alerts without lifting a finger.
Whether you’re juggling kids, pets, or just trying to stay productive at home, knowing exactly who’s at your door—and seeing them clearly—can make a huge difference. And the best part? It’s easier than you think. With a few simple steps, you can transform your Echo Show into your home’s smartest security assistant.
In this guide, I’ll walk you through exactly how to make Echo Show automatically show Ring doorbell—no tech degree required. I’ve tested this setup in my own home, and once it’s running, it feels like magic. But more importantly, it’s practical, reliable, and saves you time and stress.
So if you’re ready to stop missing deliveries, keep an eye on your front porch, or just enjoy the satisfaction of a perfectly integrated smart home, keep reading. This is one of those little upgrades that makes everyday life just a bit smoother.
What You Need
Before we dive into the steps, let’s make sure you’ve got everything you need. Don’t worry—this isn’t a complicated shopping list. Most of these items are probably already in your home.
Visual guide about How to Make Echo Show Automatically Show Ring Doorbell
Image source: res.cloudinary.com
Here’s what you’ll need to get started:
- A Ring Video Doorbell (any model—wired or battery-powered works)
- An Echo Show device (5, 8, 10, or 15—any generation will do)
- Amazon and Ring accounts linked together (we’ll cover this)
- Wi-Fi connection (both devices need to be on the same network)
- The Alexa app (free on iOS and Android)
- The Ring app (also free—used for initial setup and management)
That’s it! No extra hardware, no subscriptions (unless you want Ring Protect for cloud recording), and no technical tools. Everything you need is either already in your home or just a quick download away.
One thing to note: your Echo Show and Ring doorbell must be connected to the same Wi-Fi network. If you’ve got a mesh system or multiple networks (like a guest network), make sure both devices are on the main one. I learned this the hard way when my Echo Show couldn’t “see” my Ring doorbell because they were on different bands. A quick router check fixed it in seconds.
Also, while this guide focuses on the Echo Show, the same principles apply if you’re using an Echo Spot or even a Fire TV with Alexa built-in. But for simplicity, we’ll stick with the Echo Show since it’s the most common display device for this kind of setup.
Now that you’ve got your gear ready, let’s get into the fun part—making it all work together.
Step-by-Step Guide to How to Make Echo Show Automatically Show Ring Doorbell
Step 1: Set Up Your Ring Doorbell (If You Haven’t Already)
If your Ring doorbell is brand new or hasn’t been installed yet, start here. Even if you’ve used it before, it’s worth double-checking that it’s properly connected and functioning.
First, download the Ring app from the App Store or Google Play. Open it and create an account (or log in if you already have one). Then, follow the in-app instructions to set up your doorbell. This usually involves scanning a QR code on the device, connecting it to Wi-Fi, and testing the live view.
Pro tip: During setup, make sure your doorbell is charged (if battery-powered) or wired correctly (if hardwired). A weak signal or low battery can cause delays or missed alerts—defeating the whole purpose of automatic display on your Echo Show.
Once your Ring doorbell is online and you can see a live feed in the app, you’re ready for the next step. Test the doorbell by pressing the button yourself. You should hear a chime (if connected to a chime kit) and receive a notification on your phone. If that works, great—your doorbell is ready to talk to Alexa.
Step 2: Link Your Ring Account to Alexa
Now it’s time to connect Ring and Alexa so they can communicate. This is the magic step that allows your Echo Show to automatically display the doorbell feed.
Open the Alexa app on your phone. Tap the menu icon (three lines) in the top-left corner, then select Skills & Games. In the search bar, type “Ring” and select the official Ring – Smart Lighting, Doorbells & Cameras skill.
Tap Enable to Use. You’ll be prompted to log in to your Ring account. Enter your Ring email and password. Once logged in, Alexa will ask for permission to access your Ring devices. Grant access—this is necessary for the integration to work.
After linking, Alexa will scan for your Ring devices. This usually takes 10–30 seconds. Once complete, you should see your doorbell listed under “Devices” in the Alexa app. If it doesn’t appear, try disabling and re-enabling the skill, or restart both apps.
Here’s a personal tip: I once forgot to enable the skill after updating my Ring password. The integration broke, and I spent 20 minutes troubleshooting before realizing the skill needed re-authentication. Save yourself the headache—always re-link after password changes.
Step 3: Enable Doorbell Announcements on Your Echo Show
This is where the automation kicks in. You’re telling Alexa: “Whenever someone rings the doorbell, show me the video on my Echo Show.”
In the Alexa app, go to Devices > Cameras. Find your Ring doorbell and tap on it. Look for an option called Doorbell Press Announcements or Announcements (the exact wording may vary slightly by device).
Toggle this setting On. You’ll also see options to choose which Echo devices should show the feed. Make sure your Echo Show is selected. You can choose multiple devices if you have more than one—like showing the feed on both your kitchen Echo Show and your living room Echo Show 10.
You can also customize the announcement sound and whether Alexa speaks a message like “Someone is at the front door.” I keep the voice announcement off because I prefer just seeing the video pop up silently—especially during meetings or when the kids are sleeping.
Once enabled, test it! Press your Ring doorbell button. Within 2–3 seconds, your Echo Show should display the live feed automatically. No tapping, no swiping—just instant visibility.
Step 4: Adjust Motion and Alert Settings (Optional but Recommended)
While the doorbell press triggers the Echo Show automatically, you might also want to see motion alerts. For example, if someone approaches your door but doesn’t ring the bell, you’ll still get a notification.
In the Ring app, go to your doorbell settings and enable Motion Alerts. You can customize the motion zones—like ignoring the sidewalk but alerting when someone steps onto your porch.
Then, in the Alexa app, go back to your Ring device settings and enable Motion Announcements. This will make your Echo Show display a preview or notification when motion is detected, even without a button press.
I use this feature all the time. Last week, my neighbor’s dog got loose and wandered into my yard. My Echo Show lit up with a motion alert, and I was able to check the feed and call my neighbor before the dog went too far. It’s not just for visitors—it’s for peace of mind.
Just be careful not to overdo it. If your doorbell is too sensitive, you might get alerts every time a car drives by or a leaf blows past. Start with moderate sensitivity and adjust based on your environment.
Step 5: Test and Troubleshoot
Now that everything is set up, it’s time to test the full experience. Press your Ring doorbell and watch your Echo Show. Does the feed appear within 3 seconds? Is the video clear? Is the audio working (if enabled)?
If it works—congrats! You’ve successfully learned how to make Echo Show automatically show Ring doorbell. But if not, don’t panic. Here are a few common fixes:
- No video on Echo Show? Check that both devices are on the same Wi-Fi network. Restart your Echo Show and router if needed.
- Delayed or choppy feed? Your Wi-Fi signal might be weak near the doorbell. Consider a Wi-Fi extender or moving your router.
- Announcement plays but no video? Make sure “Doorbell Press Announcements” is enabled in the Alexa app, not just motion alerts.
- Skill not linking? Disable and re-enable the Ring skill in Alexa. Sometimes a fresh start helps.
I once had a day where the feed wouldn’t load at all. Turned out my Ring doorbell’s firmware was outdated. A quick update in the Ring app fixed it. Always keep both apps and devices updated.
Testing isn’t just about making sure it works today—it’s about ensuring reliability over time. I recommend testing once a week, especially after software updates.
Pro Tips & Common Mistakes to Avoid
Now that you’ve got the basics down, let’s talk about the little things that can make or break your experience. These are lessons I’ve learned the hard way—so you don’t have to.
Pro Tip: Place your Echo Show where you’ll actually see it. I made the mistake of setting this up on a bedroom Echo Show first. Great idea in theory—but I was rarely in the bedroom when the doorbell rang. Now it’s on the kitchen counter, where I spend most of my time. Game changer.
Another common mistake? Forgetting to enable announcements on the right device. You might link Ring to Alexa, but if you don’t specifically select your Echo Show in the announcement settings, nothing will happen. Always double-check which devices are set to receive alerts.
Also, don’t rely solely on the Echo Show for security. While the automatic display is incredibly convenient, it’s still a good idea to keep the Ring app on your phone for two-way audio, recording, and historical footage. The Echo Show is a fantastic supplement—not a replacement.
One thing I wish I’d known earlier: you can customize the announcement message. In the Alexa app, go to Settings > Device Settings > select your Echo Show > Doorbell Press Announcements. You can change the voice, volume, and even the message itself. I changed mine to “Delivery at the door” so I know it’s probably a package—not a visitor.
And here’s a sneaky tip: if you have multiple Echo Shows, you can set different behaviors for each. For example, show the full video feed on the kitchen Echo Show, but only play a sound on the bedroom one. This way, you’re not disturbed at night unless it’s urgent.
Finally, be mindful of privacy. If you have guests over, they might not expect to be recorded the moment they approach your door. Consider adding a small sign near your doorbell that says “Video Surveillance in Use”—it’s polite and often required by local laws.
Avoid these pitfalls, and your setup will run smoothly for years.
FAQs About How to Make Echo Show Automatically Show Ring Doorbell
Q: Does this work with all Echo Show models?
A: Yes! Whether you have an Echo Show 5, 8, 10, or 15, the process is the same. The only difference might be screen size and audio quality, but the functionality is identical.
Q: Will this use up a lot of my Wi-Fi bandwidth?
A: Not really. The video feed is optimized for low bandwidth, and it only activates when the doorbell is pressed or motion is detected. In my experience, it hasn’t slowed down my internet or caused buffering issues.
Q: Can I disable the voice announcement but still see the video?
A: Absolutely. In the Alexa app, under your Echo Show’s doorbell settings, you can turn off the spoken announcement while keeping the video display on. Perfect for quiet environments.
Q: What if my Ring doorbell is battery-powered? Will it still work?
A: Yes, but battery life may be affected if you get frequent alerts. I recommend keeping the battery charged and using motion zones to reduce unnecessary activations. A wired doorbell will always be more reliable for constant use.
Q: Can I use this with multiple Ring devices?
A: Definitely. If you have a Ring doorbell and a Ring security camera, you can set up announcements for both. Just link them all through the Ring skill in Alexa and choose which Echo Shows should display each feed.
Q: Why isn’t my Echo Show showing the feed even though everything is linked?
A: First, check that “Doorbell Press Announcements” is enabled in the Alexa app. Then, restart your Echo Show and router. If it still doesn’t work, try re-linking the Ring skill. Sometimes a fresh connection is all it takes.
Q: Is there a way to record the feed when it shows on Echo Show?
A: Not directly through the Echo Show. However, if you have a Ring Protect plan, all doorbell events are automatically recorded and saved in the Ring app. You can review them anytime—even if you missed the live feed.
Final Thoughts
Setting up your Echo Show to automatically display your Ring doorbell isn’t just a cool tech trick—it’s a practical upgrade that makes daily life easier. No more missed packages, unexpected visitors, or frantic phone checks. Just clear, instant visibility the moment someone approaches your door.
And the best part? It takes less than 15 minutes to set up. Once it’s running, you’ll wonder how you ever lived without it. I know I did.
So go ahead—follow these steps, test it out, and enjoy the peace of mind that comes with a smarter, more connected home. Whether you’re a busy parent, a remote worker, or just someone who values convenience, this integration is worth every second.
And if you run into any hiccups, don’t stress. Smart home tech isn’t always perfect on the first try. But with a little patience and the right setup, you’ll have a system that works seamlessly—day after day.
Now, the next time your doorbell rings, you’ll be ready. Not just to answer it—but to see exactly who’s there, right when it matters.