How to Mount a Ring Battery Doorbell Plus

This guide walks you through mounting your Ring Battery Doorbell Plus with clear, beginner-friendly steps. You’ll learn how to choose the right location, install the mounting bracket, attach the doorbell, and test your setup for optimal performance.

Key Takeaways

Choose the right location: Mount your doorbell 48 inches above the ground and within Wi-Fi range for the best signal and video quality.
Use the correct tools: A drill, screwdriver, level, and measuring tape are essential for a secure and level installation.
Angle the bracket if needed: Use the included wedge or corner mount to adjust the viewing angle, especially on uneven surfaces or corners.
Test before finalizing: Power on the doorbell and check the live view in the Ring app before securing all screws.
Maintain battery life: Charge the battery fully before installation and recharge every 6–12 months depending on usage.
Enable motion settings: Customize motion zones and sensitivity in the app to reduce false alerts.
Secure against theft: Use the anti-theft screw and consider a security screwdriver for added protection.

How to Mount a Ring Battery Doorbell Plus

Installing a Ring Battery Doorbell Plus is a smart way to boost your home security without the hassle of hardwiring. Whether you’re replacing an old doorbell or setting up your first smart doorbell, this guide will walk you through every step—from planning your setup to testing the final installation. With the right tools and a little patience, you can have your Ring Doorbell up and running in under 30 minutes.

This guide is designed for beginners and DIY enthusiasts alike. You don’t need to be an electrician or tech expert to get it right. We’ll cover everything you need to know, including choosing the perfect spot, using the right tools, adjusting the angle, and troubleshooting common issues. By the end, you’ll have a fully functional, securely mounted doorbell that keeps your home safe and gives you peace of mind.

Let’s get started!

What You’ll Need Before You Begin

Visual guide about How to Mount a Ring Battery Doorbell Plus

Image source: en-uk.ring.com

Before you grab your drill and head to the front door, make sure you have all the necessary tools and materials. Having everything ready will save you time and prevent frustration during installation.

Here’s a checklist of what you’ll need:

Ring Battery Doorbell Plus – Make sure it’s fully charged or has a fresh battery.
Mounting bracket – Included in the box; choose the standard or corner mount depending on your setup.
Screws and anchors – Also included; use wall anchors if mounting on brick, concrete, or other hard surfaces.
Drill – A power drill with a 3/16-inch drill bit works best for most surfaces.
Screwdriver – A Phillips head screwdriver or a drill with a screwdriver bit.
Level – Ensures your doorbell is straight and looks professional.
Measuring tape – Helps you find the ideal height and center point.
Pencil – For marking drill holes.
Smartphone with the Ring app – Download it from the App Store or Google Play if you haven’t already.
Wi-Fi network – Your doorbell needs a 2.4 GHz Wi-Fi connection (5 GHz is not supported).

Optional but helpful:

Wedge mount – If your doorbell needs to be angled toward the walkway.
Corner mount – For installing on the corner of your house or porch.
Security screwdriver – To install the anti-theft screw and deter tampering.
Ladder – If your doorbell is mounted high or you need better access.

Pro tip: Charge your Ring Doorbell battery fully before starting. A full charge takes about 5–6 hours and lasts 6–12 months, depending on usage and climate.

Step 1: Choose the Right Location

Picking the perfect spot for your Ring Battery Doorbell Plus is crucial. A good location ensures clear video, reliable motion detection, and strong Wi-Fi connectivity.

Ideal Height

Mount your doorbell 48 inches (4 feet) above the ground. This height is recommended by Ring because it:

Provides a clear view of visitors’ faces.
Reduces the chance of tampering or theft.
Aligns with most door frames and porch layouts.

Use your measuring tape to mark the spot. If you’re replacing an existing doorbell, you can use the old mounting holes as a reference—but only if they’re at the right height.

Wi-Fi Signal Strength

Your doorbell needs a strong Wi-Fi connection to stream video and send alerts. Before drilling, check your signal strength:

Stand at the proposed location with your phone.
Open a video streaming app or run a speed test.
If the signal is weak, consider moving your router, using a Wi-Fi extender, or choosing a different spot.

Avoid placing the doorbell:

Behind metal doors or thick walls.
Near large appliances that emit interference (like microwaves or refrigerators).
In direct sunlight for long periods (can cause overheating).

Viewing Angle and Coverage

Your doorbell should face the walkway or driveway where visitors approach. If your door is set back or on a corner, you may need to adjust the angle.

Use the included wedge mount (angled bracket) or corner mount to tilt the doorbell 15–30 degrees toward the activity zone. This improves motion detection and ensures you capture people walking up, not just standing still.

Example: If your front door is recessed into a porch, a wedge mount can angle the camera outward to cover the walkway.

Step 2: Remove the Old Doorbell (If Applicable)

If you’re replacing an existing doorbell, you’ll need to remove it first. This step is optional if you’re installing on a blank wall.

Turn Off Power (For Wired Doorbells)

Even though the Ring Battery Doorbell Plus is wireless, your old doorbell might be wired. For safety:

Go to your home’s circuit breaker.
Turn off the power to the doorbell circuit.
Use a non-contact voltage tester to confirm the wires are dead.

Never skip this step—electrical shocks can be dangerous.

Remove the Old Unit

Unscrew the old doorbell from the wall.
Carefully pull it away to expose the wires.
Disconnect the wires by loosening the terminal screws.
Cap the wires with wire nuts and tuck them safely into the wall.

You don’t need to remove the old chime inside your home—the Ring Doorbell works independently.

Patch and Prep the Wall

If the old mounting holes are in the wrong spot or too large:

Fill old holes with spackle or wall filler.
Let it dry, then sand smooth.
Wipe the area clean before installing the new bracket.

This ensures a clean, professional look.

Step 3: Install the Mounting Bracket

Now it’s time to mount the bracket that will hold your Ring Doorbell.

Position the Bracket

Hold the mounting bracket against the wall at the 48-inch mark.
Use a level to make sure it’s straight.
Mark the screw holes with a pencil.

If you’re using a wedge or corner mount, attach it to the bracket first, then position the entire assembly.

Drill Pilot Holes

Use a 3/16-inch drill bit to create pilot holes at the marked spots.
Drill slowly to avoid cracking brick or tile.
If mounting on concrete, brick, or stucco, use wall anchors for extra support.

Pro tip: For brick or masonry, use a hammer drill if available. Regular drills can struggle with hard surfaces.

Secure the Bracket

Line up the bracket with the pilot holes.
Insert the screws and tighten them with a screwdriver or drill.
Don’t overtighten—this can crack the bracket or strip the screws.

The bracket should be snug and level. Give it a gentle tug to make sure it’s secure.

Step 4: Attach the Ring Doorbell

With the bracket in place, it’s time to mount the doorbell itself.

Insert the Battery

Open the battery compartment on the back of the doorbell.
Insert the charged battery, matching the + and – symbols.
Close the compartment until it clicks.

Make sure the battery is fully seated. A loose battery can cause connection issues.

Mount the Doorbell

Align the doorbell with the bracket.
Slide it down until it locks into place.
You should hear a click when it’s secure.

The doorbell should sit flush against the bracket. If it wobbles, double-check the bracket installation.

Install the Anti-Theft Screw

To prevent theft:

Use the small security screw (included) to lock the doorbell to the bracket.
Tighten it with a security screwdriver or Allen wrench.
This screw prevents someone from simply lifting the doorbell off the mount.

Keep the screwdriver in a safe place—you’ll need it to remove the doorbell for battery changes.

Step 5: Connect to Wi-Fi and Set Up in the Ring App

Now that your doorbell is mounted, it’s time to connect it to your home network and customize settings.

Download and Open the Ring App

Download the Ring app (free on iOS and Android).
Create an account or log in if you already have one.
Tap “Set Up a Device” and select “Doorbells.”

Scan the QR Code

Point your phone’s camera at the QR code on the back of the doorbell.
The app will detect the device and guide you through setup.

If the QR code is damaged, you can enter the serial number manually.

Connect to Wi-Fi

Select your 2.4 GHz Wi-Fi network.
Enter your password when prompted.
Wait for the doorbell to connect (this may take 1–2 minutes).

The doorbell will show a solid blue light when connected.

Test the Live View

Tap “Live View” in the app.
Check the video quality and field of view.
Make sure the image is clear and covers the desired area.

If the video is blurry or the angle is off, you may need to adjust the bracket or use a wedge mount.

Step 6: Customize Settings and Motion Zones

Once connected, personalize your doorbell to suit your needs.

Adjust Motion Settings

Go to “Device Settings” > “Motion Settings.”
Set motion sensitivity to “Medium” or “High” depending on foot traffic.
Enable “People Only Mode” to reduce false alerts from cars or animals.

Set Up Motion Zones

Tap “Motion Zones” and draw areas where you want alerts.
Exclude areas like busy streets or neighbor’s yards.
This helps reduce unnecessary notifications.

Example: Draw a zone covering your front walkway but exclude the sidewalk where kids play.

Enable Notifications

Turn on push notifications for motion and doorbell presses.
Adjust notification schedules if you don’t want alerts at night.

Set Up Chime (Optional)

If you want an indoor chime:

Buy a Ring Chime or Chime Pro.
Plug it into an outlet and pair it in the app.
Choose a chime sound and volume.

Troubleshooting Common Issues

Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.

Doorbell Won’t Connect to Wi-Fi

Make sure you’re using a 2.4 GHz network (not 5 GHz).
Move closer to the router during setup.
Restart your router and try again.
Reset the doorbell by holding the orange button for 20 seconds.

Video Quality is Poor

Check Wi-Fi signal strength at the doorbell location.
Clean the camera lens with a soft, dry cloth.
Adjust the angle to avoid glare from sunlight or porch lights.

Motion Alerts Are Too Frequent

Lower motion sensitivity in the app.
Use “People Only Mode.”
Adjust motion zones to exclude high-traffic areas.

Battery Drains Too Fast

Reduce motion sensitivity or disable “Live View” when not needed.
Enable “Snapshot Capture” instead of continuous recording.
Check for firmware updates in the app.

Doorbell Falls Off the Bracket

Make sure the anti-theft screw is tightened.
Check that the bracket is securely mounted.
Use wall anchors on hard surfaces.

Maintenance Tips for Long-Term Use

To keep your Ring Doorbell Plus working smoothly:

Charge the battery every 6–12 months. Remove the doorbell using the security screwdriver and charge it with the included USB cable.
Clean the lens monthly. Use a microfiber cloth to remove dust, dirt, or spiderwebs.
Check for firmware updates. The Ring app will notify you when updates are available.
Inspect the mount seasonally. Make sure screws are tight and the bracket hasn’t loosened.
Trim nearby plants. Overgrown bushes can block the camera or trigger false motion alerts.

Conclusion

Mounting a Ring Battery Doorbell Plus is a simple, rewarding project that enhances your home’s security. By following this guide, you’ve learned how to choose the right location, install the bracket securely, connect to Wi-Fi, and customize settings for optimal performance.

Remember to mount the doorbell at 48 inches, use the correct tools, and test the live view before finalizing the setup. With features like motion zones, people-only detection, and anti-theft protection, your Ring Doorbell Plus will keep you informed and your home safe.

Take a moment to enjoy your new smart doorbell—and rest easy knowing you’ve taken a big step toward a smarter, safer home.