This guide walks you through how to mount a Ring Doorbell Pro safely and correctly, from choosing the right location to final setup. Whether you’re replacing an old doorbell or installing one for the first time, we’ll help you get it right the first time.
Key Takeaways
- Choose the right location: Mount your Ring Doorbell Pro at a height of 48 inches and within 3–10 feet of your Wi-Fi router for optimal signal strength.
- Turn off power before installation: Always shut off electricity at the breaker to avoid shocks when working with existing wiring.
- Use the right tools: A drill, level, screwdriver, and voltage tester are essential for a secure and safe installation.
- Secure the mounting bracket properly: Ensure the bracket is tightly fastened to prevent sagging or misalignment over time.
- Test the device after setup: Use the Ring app to confirm motion detection, video quality, and connectivity before finishing.
- Adjust angles for best coverage: Tilt or angle the doorbell slightly downward to capture visitors and packages clearly.
- Maintain your device: Clean the lens monthly and check for firmware updates to keep your doorbell working smoothly.
How to Mount a Ring Doorbell Pro: A Complete Step-by-Step Guide
So, you’ve got your hands on a Ring Doorbell Pro—congratulations! This sleek, feature-packed smart doorbell offers HD video, two-way talk, advanced motion detection, and seamless integration with your smartphone. But before you can start monitoring your front door like a pro, you need to install it properly. That’s where this guide comes in.
In this comprehensive how-to, we’ll walk you through how to mount a Ring Doorbell Pro from start to finish. Whether you’re replacing an old mechanical doorbell or installing one in a new location, we’ve got you covered. You’ll learn how to choose the best spot, gather the right tools, safely handle electrical wiring, secure the mounting bracket, connect to Wi-Fi, and test everything for peak performance.
By the end of this guide, you’ll have a fully functional Ring Doorbell Pro that keeps your home safe and gives you peace of mind—no matter where you are. Let’s get started!
What You’ll Need Before You Begin
Visual guide about How to Mount a Ring Doorbell Pro
Image source: windowscentral.com
Before you grab your drill and head to the front door, take a moment to gather all the necessary tools and materials. Having everything ready will make the installation process smoother and safer.
Here’s a checklist of what you’ll need:
- Ring Doorbell Pro (and included mounting hardware) – Make sure all parts are in the box.
- Drill with drill bits – A 1/4-inch masonry bit is ideal if you’re drilling into brick or concrete.
- Screwdriver (Phillips head) – For tightening screws on the mounting bracket and doorbell.
- Level – Ensures your doorbell is straight and properly aligned.
- Pencil or marker – For marking drill points.
- Voltage tester – To confirm power is off before touching wires.
- Wire strippers (optional) – If you need to trim or re-strip existing doorbell wires.
- Smartphone with the Ring app installed – Required for setup and configuration.
- Ladder (if needed) – For reaching higher mounting points safely.
- Safety goggles and gloves – Always better to be safe than sorry.
Pro tip: If you’re unsure about your home’s wiring or electrical setup, consider consulting a licensed electrician. Safety first!
Step 1: Choose the Best Location for Your Doorbell
Picking the right spot is crucial for both functionality and security. A poorly placed doorbell can miss visitors, have weak Wi-Fi, or be easily tampered with.
Ideal Mounting Height
The recommended height for mounting your Ring Doorbell Pro is 48 inches (4 feet) from the ground. This height ensures the camera captures faces clearly and avoids obstructions like mailboxes or plants.
Wi-Fi Signal Strength
Your Ring Doorbell Pro needs a strong Wi-Fi connection to stream video and send alerts. Ideally, it should be within 3 to 10 feet of your Wi-Fi router. If your router is far away, consider using a Wi-Fi extender or mesh network to boost the signal.
Field of View
Look for a spot that gives you a clear view of your front walkway, porch, or driveway. Avoid mounting it too high or too low, as this can create blind spots. A slight downward tilt (about 10–15 degrees) helps capture packages left at the door.
Avoid Obstructions
Make sure trees, bushes, or decorative elements won’t block the camera lens or motion sensors. Also, avoid placing it directly under bright lights or in areas with heavy sun glare, which can wash out the video.
Check Local Regulations
Some neighborhoods or homeowners’ associations (HOAs) have rules about doorbell placement or appearance. Double-check before drilling into your siding or brick.
Once you’ve found the perfect spot, mark it lightly with a pencil. Use a level to ensure it’s straight—this small step prevents a crooked doorbell that looks unprofessional and affects performance.
Step 2: Turn Off the Power
Safety is non-negotiable when working with electrical wiring. Even though doorbell circuits are low voltage, they can still deliver a shock—especially if connected to a transformer with higher output.
Locate Your Circuit Breaker
Head to your home’s electrical panel and find the breaker labeled “doorbell,” “chime,” or something similar. If there’s no label, you may need to test breakers one by one.
Turn Off the Breaker
Switch the breaker to the “off” position. To be extra safe, use a voltage tester on the existing doorbell wires to confirm no power is flowing.
Test the Old Doorbell
Press the existing doorbell button. If it doesn’t ring, the power is off. If it still works, turn off additional breakers until it stops.
Never skip this step—even a small shock can be dangerous, and you don’t want to risk damaging your new Ring Doorbell Pro.
Step 3: Remove the Old Doorbell (If Applicable)
If you’re replacing an old doorbell, you’ll need to remove it before installing the Ring Doorbell Pro.
Unscrew the Faceplate
Use a screwdriver to remove the screws holding the old doorbell in place. Gently pull the unit away from the wall.
Disconnect the Wires
You’ll see two wires connected to the back of the old doorbell. Loosen the terminal screws and carefully pull the wires free. Don’t let them fall back into the wall—use electrical tape to secure them temporarily to the wall or a nearby surface.
Inspect the Wires
Check the condition of the wires. If they’re frayed, corroded, or too short, you may need to strip the ends or extend them slightly. Use wire strippers to expose about 1/4 inch of fresh copper.
Patch the Hole (Optional)
If the old doorbell was larger than the Ring Doorbell Pro, you might see a gap around the mounting area. Use spackle or caulk to fill it, then sand and paint to match your wall.
Now you’re ready to install the new mounting bracket.
Step 4: Install the Mounting Bracket
The mounting bracket is the backbone of your installation. It holds the Ring Doorbell Pro securely and allows for angle adjustments.
Position the Bracket
Hold the bracket against the wall at your chosen location (48 inches high). Use a level to ensure it’s straight. Mark the screw holes with a pencil.
Drill Pilot Holes
Using a drill bit slightly smaller than your screws, drill pilot holes at the marked spots. This prevents the wall from cracking, especially on brick or concrete.
If you’re mounting into brick, stucco, or concrete, use a masonry bit and wall anchors for extra support.
Secure the Bracket
Line up the bracket with the pilot holes and insert the screws. Tighten them firmly with a screwdriver, but don’t over-tighten—this can strip the screws or damage the bracket.
Adjust the Angle (Optional)
The Ring Doorbell Pro comes with optional wedge and corner mounts if you need to angle the device. For example:
- Use the wedge mount to tilt the doorbell downward for better package detection.
- Use the corner mount if installing on a corner wall for a wider field of view.
Attach the wedge or corner piece to the bracket before securing it to the wall.
Reconnect the Wires
Take the two doorbell wires and thread them through the center hole of the bracket. Strip the ends if needed, then connect them to the terminals on the back of the bracket. It doesn’t matter which wire goes where—Ring devices are non-polarized.
Tighten the terminal screws to secure the wires. Give them a gentle tug to make sure they’re snug.
Step 5: Attach the Ring Doorbell Pro
Now it’s time to mount the actual device.
Align the Doorbell
Hold the Ring Doorbell Pro against the mounting bracket. The two hooks on the back of the device should slide into the slots on the bracket.
Secure with the Security Screw
Once the doorbell is in place, use the included security screw and screwdriver to fasten it to the bracket. This prevents theft and ensures the device stays put.
Don’t overtighten—just snug enough to hold it securely.
Check the Fit
Make sure the doorbell sits flush against the wall and doesn’t wobble. If it’s loose, double-check the bracket installation or tighten the security screw.
Step 6: Restore Power and Test the Wiring
With the doorbell mounted, it’s time to turn the power back on and test the connection.
Turn On the Breaker
Go back to your electrical panel and switch the doorbell breaker back to “on.”
Listen for the Chime
If you have a mechanical chime, listen for a soft click or hum—this means power is reaching the doorbell.
Check for LED Light
The Ring Doorbell Pro has a small LED light on the front. If it blinks white, the device is receiving power and is ready for setup.
If the light doesn’t come on:
- Double-check that the wires are securely connected.
- Verify the breaker is on and the voltage tester confirms power.
- Ensure the wires aren’t touching each other (short circuit).
If everything looks good but it’s still not powering on, try loosening the terminal screws, reinserting the wires, and tightening again.
Step 7: Set Up the Ring Doorbell Pro Using the App
The Ring app is your control center for configuring and managing your doorbell. Download it from the App Store (iOS) or Google Play (Android) if you haven’t already.
Create or Log In to Your Ring Account
Open the app and sign in with your existing Ring account or create a new one. You’ll need an email address and password.
Add a New Device
Tap the three-line menu (☰) in the top-left corner, then select “Set Up a Device.” Choose “Doorbells” and then “Ring Doorbell Pro.”
Scan the QR Code
The app will prompt you to scan the QR code on the back of your doorbell. Hold your phone steady until it recognizes the code.
Connect to Wi-Fi
Select your home Wi-Fi network and enter the password. The doorbell will connect to your network. This may take a minute or two.
Name Your Doorbell
Give your doorbell a name, like “Front Door” or “Main Entrance,” so you can identify it easily in the app.
Adjust Settings
Customize your preferences:
- Motion Zones: Define areas where you want motion alerts (e.g., driveway but not sidewalk).
- Motion Sensitivity: Set how sensitive the motion detection is.
- Video Quality: Choose HD or standard based on your Wi-Fi speed.
- Notifications: Enable push alerts for motion and rings.
Test the Doorbell
Press the button on the front of the doorbell. You should hear a chime (if connected to a mechanical chime) and receive a notification on your phone.
Walk in front of the doorbell to test motion detection. The app should show a live video feed and record a clip.
Step 8: Fine-Tune the Installation
Even after setup, a few tweaks can improve performance.
Adjust the Angle
If the camera view is too high or too low, you can slightly adjust the doorbell on the bracket. Loosen the security screw just enough to tilt it, then retighten.
Check Wi-Fi Signal
In the Ring app, go to Device Health to check signal strength. If it’s weak, consider moving your router, using a Wi-Fi extender, or upgrading to a mesh system.
Enable Advanced Features
- Pre-Roll: Captures a few seconds of video before motion is detected.
- People Only Mode: Reduces false alerts by only notifying you of human movement.
- Linked Devices: Connect to other Ring products like cameras or alarms.
Install a Solar Charger (Optional)
If you want to reduce battery drain (though the Pro is wired), you can add a Ring Solar Charger to keep it powered during outages.
Troubleshooting Common Installation Issues
Even with careful planning, problems can arise. Here’s how to fix the most common ones.
Doorbell Won’t Power On
- Check that the breaker is on and wires are connected.
- Use a voltage tester to confirm 16–24V AC at the terminals.
- If voltage is low, your transformer may be underpowered—consider upgrading it.
Weak Wi-Fi Signal
- Move your router closer or use a Wi-Fi extender.
- Avoid placing the doorbell behind metal doors or thick walls.
- Switch to a 2.4GHz network if 5GHz is too weak.
Blurry or Dark Video
- Clean the lens with a soft, dry cloth.
- Adjust the angle to avoid direct sunlight or glare.
- Enable night vision in the app settings.
False Motion Alerts
- Narrow the motion zones to exclude busy streets or trees.
- Lower motion sensitivity.
- Enable People Only Mode.
Doorbell Falls Off or Wobbles
- Tighten the security screw.
- Ensure the mounting bracket is securely fastened to the wall.
- Use wall anchors if mounting into drywall or weak surfaces.
Maintenance Tips to Keep Your Doorbell Working
A little upkeep goes a long way in keeping your Ring Doorbell Pro in top shape.
- Clean the lens monthly with a microfiber cloth to maintain clear video.
- Check for firmware updates in the Ring app—these improve performance and security.
- Inspect wires and connections twice a year to ensure they’re secure.
- Trim nearby plants that might block the camera or motion sensors.
- Test the doorbell monthly to ensure it’s working properly.
Conclusion
Mounting a Ring Doorbell Pro might seem intimidating at first, but with the right tools, preparation, and this step-by-step guide, it’s a straightforward DIY project. From choosing the perfect location to securing the mounting bracket, connecting the wires, and setting up the app, every step is designed to help you get the most out of your smart doorbell.
Remember: safety comes first—always turn off the power before handling wires. And don’t rush the setup in the app; taking time to customize motion zones and notifications ensures you’ll get useful alerts, not constant false alarms.
Once installed, your Ring Doorbell Pro will give you real-time visibility of your front door, deter package thieves, and let you communicate with visitors—even when you’re not home. It’s a small investment that delivers big peace of mind.
So grab your tools, follow this guide, and enjoy the security and convenience of your new Ring Doorbell Pro. Welcome to the future of home security!