Mounting your Ring Battery Doorbell Pro doesn’t have to be complicated. This guide walks you through every step—from choosing the right location to final testing—so you can enjoy smart security in no time.
Key Takeaways
- Choose the right location: Mount your doorbell 4 feet above the ground and within Wi-Fi range for optimal performance and video quality.
- Gather the right tools: You’ll need a drill, screwdriver, level, and possibly a voltage tester if wiring near existing doorbells.
- Use the mounting bracket correctly: The included bracket ensures a secure fit and allows for angle adjustments to improve camera view.
- Charge the battery fully before installation: A full charge ensures your doorbell works immediately after setup and avoids early power issues.
- Test Wi-Fi signal strength: Use the Ring app’s signal tool to confirm strong connectivity at the mounting spot before drilling.
- Secure all screws and covers: Properly tighten screws and snap on the faceplate to prevent tampering and weather damage.
- Complete setup in the Ring app: Finalize installation by linking your device, setting motion zones, and enabling notifications.
How to Mount Ring Battery Doorbell Pro: A Complete Step-by-Step Guide
So you’ve just unboxed your new Ring Battery Doorbell Pro—congratulations! You’re about to upgrade your home security with a sleek, smart doorbell that lets you see, hear, and speak to visitors from anywhere. But before you can start receiving motion alerts and live video feeds, you need to mount it properly.
Don’t worry—this isn’t rocket science. With the right tools, a little patience, and this detailed guide, you’ll have your Ring Battery Doorbell Pro installed and working in under an hour. Whether you’re replacing an old doorbell or installing one for the first time, we’ve got you covered.
In this guide, you’ll learn:
– How to choose the best mounting location
– What tools you’ll need
– Step-by-step mounting instructions
– How to connect and configure your doorbell via the Ring app
– Tips to avoid common mistakes
– Troubleshooting solutions if something goes wrong
Let’s get started!
What’s in the Box?
Visual guide about How to Mount Ring Battery Doorbell Pro
Image source: images.expertreviews.co.uk
Before you begin, make sure you have all the components that come with your Ring Battery Doorbell Pro. Here’s what should be included:
– Ring Battery Doorbell Pro unit
– Rechargeable battery pack
– Mounting bracket (with optional wedge and corner kits)
– Screws and anchors
– Wire nuts (if replacing a wired doorbell)
– Screwdriver (small flathead)
– Installation guide and quick start card
Double-check everything is present. If anything is missing, contact Ring customer support before proceeding.
Tools You’ll Need
While Ring includes some basic tools, you’ll likely need a few more from your toolbox. Here’s a quick checklist:
– Drill with 3/16” drill bit (for masonry or wood)
– Screwdriver (Phillips head)
– Level (to ensure your doorbell is straight)
– Pencil (for marking drill points)
– Measuring tape
– Voltage tester (optional, but recommended if replacing a wired doorbell)
– Ladder (if mounting high on a wall or door frame)
Having these tools ready will make the process smoother and safer.
Step 1: Choose the Best Mounting Location
Picking the right spot is crucial for both security and functionality. Here’s what to consider:
Height Matters
Ring recommends mounting your doorbell 4 feet (about 1.2 meters) above the ground. This height captures most visitors’ faces clearly and reduces the chance of tampering.
Wi-Fi Signal Strength
Your doorbell needs a strong Wi-Fi connection to stream video and send alerts. Use the Ring app’s “Device Health” or “Signal Strength” tool to test the signal at your desired location. If the signal is weak, consider moving your router, using a Wi-Fi extender, or choosing a different spot.
Field of View
Aim for a location that gives you a clear view of your doorstep, walkway, or driveway. Avoid mounting it too close to walls, bushes, or reflective surfaces that could cause glare or blind spots.
Weather Protection
While the Ring Battery Doorbell Pro is weather-resistant (rated IP55), it’s best to install it under an eave, porch, or awning to protect it from direct rain and extreme sun.
Power Source (Optional)
The Ring Battery Doorbell Pro runs on a rechargeable battery, so you don’t need existing doorbell wires. However, if you have them, you can optionally connect them to trickle-charge the battery—more on that later.
Step 2: Charge the Battery Fully
Before mounting, charge the battery pack completely. A full charge ensures your doorbell works right after installation and avoids early shutdowns.
How to Charge the Battery
– Remove the battery from the doorbell by pressing the release button on the bottom.
– Plug the USB cable (included) into the battery and a power source (wall adapter or computer).
– Charge for at least 5–6 hours or until the LED light turns green.
– Reinsert the battery into the doorbell.
Pro Tip: Charge the battery indoors where it’s safe and dry. Avoid charging in extreme temperatures.
Step 3: Download and Set Up the Ring App
You’ll need the Ring app to complete the setup, so download it now if you haven’t already.
App Setup Steps
– Download the Ring app from the App Store (iOS) or Google Play (Android).
– Create a Ring account or log in if you already have one.
– Tap “Set Up a Device” and select “Doorbells.”
– Choose “Ring Battery Doorbell Pro” from the list.
– Follow the on-screen prompts to scan the QR code on the back of your doorbell.
The app will guide you through Wi-Fi setup, naming your device, and setting up motion zones. But don’t finalize everything yet—wait until after mounting.
Step 4: Remove Old Doorbell (If Applicable)
If you’re replacing an existing doorbell, you’ll need to remove it first.
Safety First
– Turn off power at the circuit breaker if the old doorbell is wired.
– Use a voltage tester to confirm no current is flowing.
– Unscrew and remove the old doorbell unit.
– Disconnect wires and cap them with wire nuts for safety.
Note: Even though the Ring Battery Doorbell Pro doesn’t require wires, capping them prevents accidental shocks and keeps your setup clean.
Step 5: Install the Mounting Bracket
The mounting bracket is the backbone of your installation. It holds the doorbell securely and allows for angle adjustments.
Position the Bracket
– Hold the bracket against the wall at 4 feet high.
– Use a level to ensure it’s straight.
– Mark the screw holes with a pencil.
Drill Pilot Holes
– Drill two pilot holes using a 3/16” bit.
– If mounting on brick, stucco, or concrete, use wall anchors for a secure fit.
Attach the Bracket
– Align the bracket with the holes.
– Secure it with the provided screws using a screwdriver or drill.
– Make sure it’s tight and doesn’t wobble.
Optional: Use a Wedge or Corner Kit
If your doorbell is mounted on a corner or you want a better viewing angle, use the included wedge or corner mounting kit. These adjust the doorbell’s tilt to capture more of your walkway or driveway.
Step 6: Mount the Doorbell
Now it’s time to attach your Ring Battery Doorbell Pro to the bracket.
Attach the Doorbell
– Slide the doorbell onto the bracket from the top.
– Push down until it clicks into place.
– Ensure it’s secure and doesn’t move.
Secure with Screw (Optional but Recommended)
– Use the small security screw (included) to lock the doorbell to the bracket.
– This prevents theft or accidental removal.
Pro Tip: Don’t overtighten the screw—just snug it enough to hold the doorbell in place.
Step 7: Connect to Wi-Fi and Complete Setup
With the doorbell mounted, return to the Ring app to finish the setup.
Connect to Wi-Fi
– The app will prompt you to connect to your home Wi-Fi network.
– Enter your password carefully.
– Wait for the doorbell to connect (this may take 1–2 minutes).
Test the Connection
– Check the signal strength in the app under “Device Health.”
– If the signal is weak, consider relocating the doorbell or improving your Wi-Fi coverage.
Set Up Motion Zones
– Use the app to define areas where you want motion detection.
– Avoid areas like busy streets or neighbor’s yards to reduce false alerts.
Enable Notifications
– Turn on motion and ring alerts so you’re notified when someone approaches or presses the button.
Test the Doorbell
– Press the button to test the chime and live view.
– Have someone walk in front of the camera to test motion detection.
Step 8: Optional – Connect to Existing Wiring
Even though the Ring Battery Doorbell Pro runs on battery, you can connect it to existing doorbell wires to provide trickle charging. This extends battery life and reduces how often you need to recharge.
How to Connect Wires
– Turn off power at the breaker.
– Remove the doorbell from the bracket (press the release tab).
– Loosen the two terminal screws on the back.
– Insert the wires into the terminals (polarity doesn’t matter).
– Tighten the screws and reattach the doorbell.
Important: Only do this if you’re comfortable working with electrical wires. If unsure, consult an electrician.
Step 9: Final Checks and Adjustments
Before you call it a day, do a final walkthrough.
Check Alignment
– Make sure the doorbell is level and facing the right direction.
– Adjust the bracket or use a wedge if needed.
Secure All Components
– Ensure the faceplate is snapped on properly.
– Double-check that the security screw is in place.
Test in Different Conditions
– Test at night to ensure night vision works.
– Check audio quality by speaking through the app.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Turn On
– Check that the battery is fully charged and properly inserted.
– Make sure the battery contacts are clean and not obstructed.
Poor Wi-Fi Signal
– Move your router closer or use a Wi-Fi extender.
– Avoid mounting near metal surfaces or thick walls.
Blurry or Dark Video
– Clean the camera lens with a soft, dry cloth.
– Ensure the doorbell isn’t facing direct sunlight or bright lights at night.
Motion Alerts Not Working
– Check motion zones in the app—make sure they’re enabled and cover the right area.
– Adjust sensitivity settings if alerts are too frequent or too rare.
Battery Drains Too Fast
– Reduce motion sensitivity or limit motion zones.
– Disable features like pre-roll or frequent live views if not needed.
– Consider connecting to existing wires for trickle charging.
Doorbell Falls Off
– Ensure the mounting bracket is securely screwed in.
– Use the security screw to lock the doorbell in place.
– Avoid mounting on loose or damaged surfaces.
Maintenance Tips for Long-Term Use
To keep your Ring Battery Doorbell Pro working smoothly:
– Recharge the battery every 3–6 months, depending on usage.
– Clean the lens and sensor monthly with a microfiber cloth.
– Check for software updates in the Ring app.
– Inspect the mounting hardware periodically for looseness.
Conclusion
Mounting your Ring Battery Doorbell Pro is a smart, straightforward way to enhance your home security. With the right location, tools, and a little patience, you can have it up and running in under an hour. From choosing the perfect spot to finalizing the setup in the app, every step matters—but this guide makes it easy.
Remember: a well-mounted doorbell isn’t just about convenience—it’s about peace of mind. You’ll be able to see who’s at your door, even when you’re miles away. Whether you’re expecting a package, screening visitors, or just keeping an eye on your property, your Ring Battery Doorbell Pro has you covered.
So grab your tools, charge that battery, and get mounting. Your smarter, safer home is just a few screws away.