Mounting your Ring Doorbell Pro correctly ensures optimal performance and security. This guide walks you through every step—from choosing the right location to final setup—so you can install it safely and confidently on your own.
Key Takeaways
- Choose the right mounting location: Aim for 4 feet (1.2 meters) above the ground and within Wi-Fi range for best results.
- Use the included tools and hardware: The Ring Doorbell Pro kit comes with everything you need, including a level, drill bits, and screws.
- Turn off power before wiring: Always shut off electricity at the breaker to avoid shocks when connecting to existing doorbell wires.
- Adjust the angle with wedge kits: Use optional wedge or corner kits to improve camera view if your door is recessed or angled.
- Test Wi-Fi signal strength: Use the Ring app’s signal checker before finalizing placement to avoid connectivity issues.
- Secure all screws tightly: A loose mount can cause video lag or false motion alerts due to vibration.
- Complete setup in the Ring app: Finalize installation by syncing your device, setting motion zones, and enabling notifications.
Introduction: Why Proper Installation Matters
Installing your Ring Doorbell Pro might seem straightforward, but doing it right the first time saves you headaches down the road. Unlike battery-powered models, the Ring Doorbell Pro is a hardwired smart doorbell that requires a bit more planning and precision. It connects directly to your home’s existing doorbell wiring, delivering constant power and enabling advanced features like 1536p HD video, advanced motion detection, and two-way talk.
In this comprehensive guide, we’ll walk you through every step of mounting your Ring Doorbell Pro—from assessing your current setup to finalizing everything in the Ring app. Whether you’re replacing an old doorbell or installing one for the first time, this guide ensures a secure, professional-looking installation that maximizes your device’s performance. By the end, you’ll have a fully functional smart doorbell that enhances your home security without compromising aesthetics or reliability.
What You’ll Need Before You Start
Before grabbing your drill, take a moment to gather all the necessary tools and materials. The Ring Doorbell Pro comes with most of what you need, but having a few extras on hand makes the process smoother.
Visual guide about How to Mount Ring Doorbell Pro
Image source: i.redd.it
Included in the Box
- Ring Doorbell Pro unit
- Mounting bracket (standard flat mount)
- Screws and anchors
- Drill bit (for masonry or wood)
- Level tool
- Wire nuts
- Installation guide
Tools You Should Have Ready
- Phillips-head screwdriver
- Power drill (cordless recommended)
- Voltage tester (to confirm power is off)
- Pencil or marker
- Tape measure
- Smartphone with Ring app installed
Optional but Helpful Items
- Ring Wedge Mount or Corner Mount Kit (for angled or recessed doors)
- Wire strippers (if you need to trim or re-strip wires)
- Electrical tape
- Ladder (if your doorbell is high up)
Pro Tip: Download and install the Ring app on your smartphone before starting. You’ll need it to test Wi-Fi signal strength and complete the final setup.
Step 1: Choose the Best Location for Your Doorbell
The placement of your Ring Doorbell Pro affects everything—from video quality to motion detection accuracy. A poorly placed doorbell might miss visitors, trigger false alerts, or have a weak Wi-Fi connection.
Ideal Height and Angle
The recommended height for mounting is 4 feet (1.2 meters) above the ground. This ensures the camera captures faces clearly while minimizing obstruction from packages or plants. Avoid placing it too high (above 5 feet), as this can distort the view and reduce effectiveness.
Wi-Fi Signal Strength
Your Ring Doorbell Pro needs a strong Wi-Fi connection to stream video and send alerts. Before drilling any holes, use the Ring app’s Wi-Fi Signal Checker to test signal strength at your chosen location.
- Open the Ring app and go to Devices > Set Up a Device > Doorbells.
- Select “Check Wi-Fi Signal” and follow the prompts.
- Hold your phone where you plan to install the doorbell and wait for the reading.
If the signal is weak (below 70%), consider moving your router, using a Wi-Fi extender, or choosing a different spot closer to your network.
Avoiding Obstructions
Keep the camera’s field of view clear of obstacles like:
- Overgrown bushes or trees
- Mailboxes or light fixtures
- Reflective surfaces (windows, mirrors)
- Direct sunlight (can cause glare or overheating)
Example: If your front door is recessed into a porch, a standard flat mount might not give you the best angle. In this case, use a Ring Wedge Mount (sold separately) to tilt the camera outward and capture more of the walkway.
Step 2: Turn Off Power and Remove Old Doorbell
Safety first! Since the Ring Doorbell Pro connects to your home’s electrical system, you must turn off power before handling wires.
Locate Your Circuit Breaker
Find the breaker that controls your doorbell circuit. It’s often labeled “Doorbell,” “Chime,” or “Front Door.” If unsure, turn off the main breaker to be safe.
Test the Wires
Use a non-contact voltage tester to confirm the power is off. Touch the tester to the doorbell wires—if it beeps or lights up, the power is still on. Double-check your breaker and try again.
Remove the Old Doorbell
- Unscrew the existing doorbell from the wall.
- Gently pull it away to expose the wires.
- Disconnect the wires by unscrewing the terminal screws or removing wire nuts.
- Cap the wires with wire nuts to prevent them from touching each other or the wall.
Note: If you don’t have an existing doorbell or wiring, you’ll need to run new wires or consider a battery-powered Ring model instead. The Ring Doorbell Pro requires a minimum of 16–24V AC power.
Step 3: Prepare the Mounting Surface
Now that the old doorbell is gone, it’s time to prepare the area for your new Ring Doorbell Pro.
Clean the Area
Wipe down the wall surface with a damp cloth to remove dust, dirt, or old adhesive. A clean surface ensures the mounting bracket adheres properly and looks neat.
Check for Obstructions Behind the Wall
Before drilling, use a stud finder to check for electrical wires, pipes, or studs behind the wall. Drilling into a stud is fine, but avoid hitting live wires or plumbing.
Mark the Mounting Holes
Hold the mounting bracket against the wall at the desired height (4 feet). Use a pencil to mark the screw holes. Use the included level to ensure the bracket is straight—crooked doorbells look unprofessional and can affect video alignment.
Pro Tip: If your wall is uneven or textured (like stucco or brick), use the included anchors for a secure fit. For brick or concrete, use a masonry drill bit (also included).
Step 4: Drill Holes and Install the Mounting Bracket
With your marks in place, it’s time to secure the mounting bracket.
Drill Pilot Holes
Using the appropriate drill bit (wood, metal, or masonry), drill pilot holes at the marked spots. Go slowly to avoid cracking the wall or damaging surrounding areas.
Insert Anchors (If Needed)
If you’re drilling into drywall, brick, or concrete, insert the plastic anchors into the holes. Tap them gently with a hammer until flush with the wall.
Attach the Bracket
Line up the bracket with the holes and secure it using the provided screws. Tighten them firmly, but don’t over-tighten—this can strip the screws or crack the bracket.
Double-Check Alignment: Use the level again to confirm the bracket is straight. A crooked mount will make your doorbell look off-kilter, even if the camera is adjusted later.
Step 5: Connect the Wires to the Ring Doorbell Pro
Now comes the electrical part—connecting your home’s doorbell wires to the Ring Doorbell Pro.
Strip the Wires (If Necessary)
If the exposed wire ends are too short or frayed, use wire strippers to remove about 1/4 inch of insulation. This ensures a solid connection.
Connect to the Doorbell
The Ring Doorbell Pro has two terminal screws labeled “Front” and “Trans.” It doesn’t matter which wire goes where—just connect one wire to each terminal.
- Loosen the terminal screws slightly.
- Insert one wire under each screw.
- Tighten the screws to secure the wires.
Important: Do not let the bare wire ends touch each other or the metal backplate. This can cause a short circuit.
Secure the Wires
Tuck any excess wire neatly into the wall cavity to prevent it from being pinched or damaged when you attach the doorbell.
Step 6: Attach the Ring Doorbell Pro to the Bracket
With the wires connected, it’s time to mount the device.
Align the Doorbell
Hold the Ring Doorbell Pro against the mounting bracket. The two should snap together securely. You’ll hear a click when it’s properly seated.
Secure with Security Screw
Use the provided security screw and screwdriver to lock the doorbell in place. This prevents theft and ensures the device stays firmly attached.
Pro Tip: Don’t overtighten the security screw—just snug it enough to prevent removal. Over-tightening can crack the plastic housing.
Step 7: Restore Power and Test the Device
Now that everything is installed, it’s time to power up and test your doorbell.
Turn Power Back On
Go to your circuit breaker and restore power to the doorbell circuit. Wait about 30 seconds for the device to boot up.
Check the LED Light
The Ring Doorbell Pro has a status LED on the front. When powered correctly, it should glow solid white or pulse slowly. If it’s off or flashing red, there may be a wiring or power issue.
Open the Ring App
Launch the Ring app on your phone and follow the setup prompts:
- Select “Set Up a Device” > “Doorbells” > “Ring Doorbell Pro.”
- Scan the QR code on the back of the device or enter the serial number manually.
- Follow the on-screen instructions to connect to Wi-Fi and complete setup.
Test the Features
Once connected, test the following:
- Live View: Tap “Live View” in the app to see the camera feed.
- Two-Way Talk: Speak through the app and listen for audio from the doorbell.
- Motion Detection: Walk in front of the doorbell to trigger a motion alert.
- Doorbell Press: Press the button to test the chime and notification.
If everything works, congratulations—you’ve successfully installed your Ring Doorbell Pro!
Troubleshooting Common Installation Issues
Even with careful planning, problems can arise. Here’s how to fix the most common issues.
Doorbell Won’t Power On
- Check that power is restored at the breaker.
- Verify wires are securely connected and not touching.
- Use a multimeter to test voltage at the terminals (should be 16–24V AC).
- If voltage is low, your transformer may be underpowered—consider upgrading it.
Poor Wi-Fi Connection
- Move your router closer or use a Wi-Fi extender.
- Avoid placing the doorbell near metal objects or thick walls.
- Switch to a 2.4GHz network (the Ring Doorbell Pro doesn’t support 5GHz).
Blurry or Glared Video
- Clean the camera lens with a microfiber cloth.
- Adjust the angle using a wedge mount if sunlight is hitting the lens.
- Enable HDR in the app settings for better lighting balance.
False Motion Alerts
- Adjust motion zones in the app to exclude trees or busy streets.
- Lower the motion sensitivity if alerts are too frequent.
- Ensure the doorbell isn’t vibrating (tighten screws if loose).
Chime Not Working
- Check that your existing mechanical or digital chime is compatible.
- Ensure the “Chime” wire is connected to the “Trans” terminal.
- If using a digital chime, enable “Digital Chime” in the Ring app settings.
Final Tips for Long-Term Performance
Once installed, a little maintenance goes a long way.
- Clean the lens monthly to prevent dust buildup.
- Check for firmware updates in the Ring app regularly.
- Review motion settings seasonally (e.g., adjust for falling leaves in autumn).
- Keep the app updated to access new features and security patches.
Conclusion: Enjoy Your Smart Home Upgrade
Mounting your Ring Doorbell Pro doesn’t have to be intimidating. With the right tools, a bit of patience, and this step-by-step guide, you can install it safely and effectively. A properly mounted doorbell not only looks great but also delivers reliable performance, clear video, and peace of mind.
Remember, the key to success is preparation—choose the right spot, test your Wi-Fi, and follow safety protocols when handling electricity. Once everything is set up, you’ll enjoy advanced features like real-time alerts, two-way communication, and crystal-clear video, all from the convenience of your smartphone.
Now that your Ring Doorbell Pro is securely in place, take a moment to explore the app’s settings. Customize motion zones, enable person detection, and set up shared users so family members can stay connected too. Your home is now smarter, safer, and more secure—all thanks to a job well done.