This guide walks you through how to put Blink doorbell on mount safely and correctly. You’ll learn the tools required, mounting steps, and tips for optimal placement and performance.
Key Takeaways
- Choose the right location: Install your Blink doorbell at a height of 48–60 inches and within Wi-Fi range for best performance.
- Gather essential tools: You’ll need a drill, screwdriver, level, and possibly a voltage tester if replacing an existing doorbell.
- Use the mounting plate: The included mounting plate ensures a secure fit and makes future removal or battery changes easier.
- Ensure proper alignment: Use a level to keep the doorbell straight and avoid skewed video footage.
- Test after installation: Always check Wi-Fi connection, motion detection, and video quality once mounted.
- Consider wiring (optional): For continuous power, you can hardwire your Blink doorbell using existing doorbell wiring.
- Maintain regularly: Clean the lens and check battery levels every few months to keep your doorbell functioning well.
How to Put Blink Doorbell on Mount: A Complete Step-by-Step Guide
So, you’ve just unboxed your new Blink doorbell and you’re ready to install it. Congratulations! You’re about to add smart security to your front door. But now comes the big question: how to put Blink doorbell on mount the right way?
Don’t worry—this guide will walk you through every step, from planning your installation to testing the final setup. Whether you’re replacing an old doorbell or installing one for the first time, we’ve got you covered. By the end, your Blink doorbell will be securely mounted, perfectly aligned, and ready to keep an eye on your home.
Let’s get started.
Why Proper Mounting Matters
Visual guide about How to Put Blink Doorbell on Mount
Image source: m.media-amazon.com
Before we dive into the steps, it’s important to understand why mounting your Blink doorbell correctly is so crucial. A poorly installed doorbell can lead to:
- Blurry or tilted video footage
- Weak Wi-Fi signal due to poor placement
- Frequent battery drain from motion alerts triggered by wind or passing cars
- Difficulty removing the doorbell for maintenance or battery changes
By following the right process, you’ll ensure your doorbell works efficiently, lasts longer, and gives you peace of mind. Plus, a clean, professional installation looks great on your front door.
What You’ll Need
Before you begin, gather these tools and materials. Most are common household items, but having everything ready will make the process smoother.
Essential Tools
- Drill and drill bits: For making pilot holes in wood, brick, or siding.
- Screwdriver (Phillips head): For tightening screws on the mounting plate.
- Level: To ensure your doorbell is straight.
- Pencil or marker: For marking drill points.
- Measuring tape: To find the ideal height and center point.
Optional (But Helpful) Tools
- Voltage tester: If you’re replacing a wired doorbell, use this to confirm power is off.
- Wire strippers: If you plan to hardwire your Blink doorbell.
- Caulk or sealant: To weatherproof screw holes on exterior walls.
- Extension cord or ladder: For reaching high mounting spots safely.
Blink Doorbell Kit Contents
Your Blink doorbell package should include:
- Blink Video Doorbell unit
- Mounting plate (also called the backplate)
- Screws and wall anchors
- Mounting wedge (for angled surfaces)
- Quick start guide
- Batteries (usually two AA lithium batteries)
Double-check that all parts are included before you begin.
Step 1: Choose the Best Location
The first step in how to put Blink doorbell on mount is selecting the right spot. This decision affects everything from video quality to battery life.
Ideal Height
Mount your doorbell between 48 and 60 inches from the ground. This height:
- Captures faces clearly (not too high or low)
- Reduces false alerts from pets or passing cars
- Makes it easy to reach for battery changes
Wi-Fi Signal Strength
Your Blink doorbell needs a strong Wi-Fi connection to send alerts and stream video. Before drilling, check your signal strength at the installation spot:
- Use your phone or a Wi-Fi analyzer app to test signal.
- If the signal is weak, consider moving your router or using a Wi-Fi extender.
- Avoid mounting behind metal doors, thick walls, or large appliances.
Field of View
Position the doorbell so it covers your front walkway and porch. Avoid pointing it directly at:
- Bright sunlight (causes glare)
- Busy streets (triggers motion alerts)
- Neighbor’s property (privacy concerns)
Existing Doorbell Wiring (Optional)
If you have a wired doorbell, you can use the existing wires to power your Blink doorbell. This eliminates the need for battery changes. However, Blink doorbells are designed to work on batteries, so wiring is optional.
Step 2: Prepare the Mounting Surface
Once you’ve chosen the location, it’s time to prepare the wall or doorframe.
Turn Off Power (If Replacing a Wired Doorbell)
If you’re replacing an old wired doorbell:
- Go to your home’s electrical panel and turn off the circuit for the doorbell.
- Use a voltage tester to confirm no power is flowing to the wires.
- Remove the old doorbell and mounting plate.
Safety first—never work on live wires.
Clean the Area
Wipe the mounting surface with a dry cloth to remove dust, dirt, or grease. This helps the mounting plate adhere better and ensures a clean look.
Check for Obstructions
Make sure there are no nails, pipes, or electrical wires behind the wall where you plan to drill. Use a stud finder if needed.
Step 3: Install the Mounting Plate
The mounting plate is the backbone of your installation. It holds the doorbell securely and makes future maintenance easier.
Position the Plate
- Hold the mounting plate against the wall at your chosen height.
- Use a level to ensure it’s perfectly straight.
- Mark the screw holes with a pencil.
Drill Pilot Holes
- Select a drill bit slightly smaller than the screws provided.
- Drill pilot holes at the marked spots. This prevents wood from splitting and makes screwing easier.
- If mounting on brick, concrete, or siding, use a masonry bit and wall anchors.
Attach the Plate
- Line up the mounting plate with the pilot holes.
- Insert the screws and tighten them with a screwdriver or drill (on low torque).
- Don’t overtighten—this can crack the plate or damage the wall.
Use the Mounting Wedge (If Needed)
If your wall is angled (like on a corner or sloped porch), use the included mounting wedge:
- Attach the wedge to the wall first, then mount the plate on top.
- This ensures the doorbell faces straight ahead for a clear view.
Step 4: Install the Batteries
Your Blink doorbell runs on two AA lithium batteries (included). These provide long-lasting power—up to two years under normal use.
Open the Battery Compartment
- Slide the doorbell off the mounting plate (it snaps on and off easily).
- Locate the battery compartment on the back.
- Press the release tab and open the cover.
Insert the Batteries
- Place the two AA batteries into the compartment, matching the + and – symbols.
- Close the cover securely.
- Snap the doorbell back onto the mounting plate.
Tip: Use lithium batteries for better performance in cold weather.
Step 5: Attach the Doorbell to the Mount
Now it’s time to snap your Blink doorbell onto the mounting plate.
Align the Doorbell
- Hold the doorbell with the lens facing forward.
- Align the bottom groove with the mounting plate’s hook.
- Gently press the top until you hear a click.
The doorbell should snap into place securely. Give it a light tug to confirm it’s locked.
Check Alignment
Use your level again to ensure the doorbell is straight. If it’s tilted, remove it and adjust the mounting plate slightly.
Step 6: Connect to the Blink App
Your doorbell won’t work until it’s connected to the Blink app. Here’s how:
Download the App
- Install the Blink Home Monitor app on your smartphone (iOS or Android).
- Create an account or log in if you already have one.
Add Your Doorbell
- Open the app and tap “Add Device.”
- Select “Blink Video Doorbell.”
- Follow the on-screen instructions to scan the QR code on the back of the doorbell.
- The app will guide you through Wi-Fi setup and syncing.
Test the Connection
Once connected:
- Check live view to confirm video is clear.
- Test motion detection by walking in front of the doorbell.
- Verify that alerts appear on your phone.
Step 7: Adjust Settings for Best Performance
After installation, fine-tune your settings in the Blink app:
Motion Zones
- Define specific areas where you want motion detection (e.g., your porch, not the street).
- This reduces false alerts.
Alert Frequency
- Choose how often you receive notifications (e.g., every 5 minutes during activity).
Video Quality
- Adjust resolution based on your Wi-Fi speed and data usage preferences.
Night Vision
- Ensure night vision is enabled for clear footage after dark.
Optional: Hardwire Your Blink Doorbell
If you want continuous power and don’t want to change batteries, you can hardwire your Blink doorbell using existing doorbell wiring.
Check Compatibility
Your doorbell transformer should provide 8–24V AC. Most homes meet this requirement.
Connect the Wires
- Turn off power at the breaker.
- Remove the doorbell from the mount.
- Connect the two doorbell wires to the terminals on the back of the mounting plate.
- Secure the wires and reattach the plate.
- Snap the doorbell back on.
- Turn power back on.
The doorbell will now draw power from the wires. Batteries are still required as a backup.
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix them:
Doorbell Won’t Stay On
- Check battery installation—ensure they’re inserted correctly.
- Replace with fresh lithium batteries.
- If hardwired, verify the transformer is working and wires are connected.
Poor Video Quality
- Clean the lens with a soft, dry cloth.
- Ensure the doorbell is within Wi-Fi range.
- Reduce video resolution in the app if bandwidth is low.
Frequent False Alerts
- Adjust motion zones to exclude busy areas.
- Lower motion sensitivity in the app.
- Trim bushes or trees that may sway in the wind.
Doorbell Falls Off the Mount
- Ensure the mounting plate is securely screwed in.
- Check that the doorbell is fully snapped onto the plate.
- Use the mounting wedge if the surface is uneven.
Wi-Fi Connection Drops
- Move your router closer or use a Wi-Fi extender.
- Restart your router and the Blink doorbell.
- Update the Blink app and firmware.
Maintenance Tips
To keep your Blink doorbell working perfectly:
- Clean the lens monthly: Use a microfiber cloth to remove dust and smudges.
- Check battery levels: The app will notify you when batteries are low.
- Update firmware: Enable automatic updates in the app.
- Inspect the mount: Ensure screws are tight and the plate is secure.
- Test monthly: Trigger motion detection and check video quality.
Conclusion
Putting your Blink doorbell on mount doesn’t have to be complicated. By following this guide, you’ve learned how to put Blink doorbell on mount the right way—choosing the best location, using the right tools, securing the mounting plate, and connecting to the app.
A well-installed doorbell not only looks great but also performs reliably, giving you clear video, accurate alerts, and long battery life. Whether you’re using batteries or hardwiring, regular maintenance will keep your system running smoothly.
Now that your Blink doorbell is up and running, enjoy the peace of mind that comes with knowing your home is protected—day and night.