This guide walks you through how to put Ring Doorbell on mount with clear, easy-to-follow instructions. You’ll learn the right tools, mounting techniques, and tips for a secure, weatherproof installation that ensures optimal performance.
Key Takeaways
- Choose the right mount: Use the included mounting bracket or an optional angled mount for better camera angle and coverage.
- Turn off power before installing: Always shut off electricity at the breaker to avoid shocks when wiring a wired Ring Doorbell.
- Use proper tools: A drill, level, screwdriver, and voltage tester ensure a safe and accurate installation.
- Secure the mount tightly: Loose mounts cause poor video quality and device instability—tighten all screws properly.
- Test Wi-Fi signal strength: Ensure your doorbell has strong connectivity before finalizing the setup in the Ring app.
- Adjust angle for best view: Position the doorbell so it captures your doorstep and visitors clearly without obstructions.
- Regular maintenance helps: Clean the lens and check mounting screws every few months to keep your doorbell working perfectly.
How to Put Ring Doorbell on Mount: A Complete Step-by-Step Guide
Installing your Ring Doorbell might seem tricky at first, but with the right approach, it’s a straightforward DIY project. Whether you’re setting up a Ring Video Doorbell, Ring Doorbell 2, Ring Doorbell 3, Ring Doorbell 4, or the Ring Doorbell Pro, the process of how to put Ring Doorbell on mount remains similar. This guide will walk you through every step—from choosing the right location to securing the device and testing it—so you can enjoy peace of mind knowing your home is protected.
In this comprehensive how-to guide, you’ll learn how to safely mount your Ring Doorbell, whether you’re replacing an old doorbell or installing one for the first time. We’ll cover both wired and battery-powered models, explain the tools you’ll need, and share expert tips to avoid common mistakes. By the end, you’ll have a securely mounted, properly angled, and fully functional smart doorbell that enhances your home security.
What You’ll Need Before Starting
Visual guide about How to Put Ring Doorbell on Mount
Image source: doorbellnest.com
Before you begin, gather all the necessary tools and materials. Having everything ready will make the installation smoother and faster.
Tools Required
- Drill with drill bits (typically 3/32″ or 1/8″ for pilot holes)
- Screwdriver (Phillips head)
- Level (to ensure the mount is straight)
- Voltage tester (for wired models only)
- Pencil or marker (for marking drill spots)
- Measuring tape (to find the ideal height)
- Optional: Wire strippers (if reusing existing doorbell wires)
Included in the Box
- Ring Doorbell unit
- Mounting bracket (standard or corner kit, depending on model)
- Screws and wall anchors
- Security screw and tool (for tamper-proofing)
- Optional: Jumper wire (for wired installations without a transformer)
- Instruction manual and quick start guide
Optional Accessories
- Ring Corner Kit (for angled mounting)
- Ring Doorbell Mounting Block (for uneven surfaces)
- Pre-wired doorbell cable (if running new wires)
- Weatherproof sealant (for outdoor protection)
Having these tools and parts ready will save you time and frustration. If you’re installing a wired model, double-check that your existing doorbell wiring is compatible. Most Ring Doorbells work with transformers rated between 8–24 volts AC. If your current system is too weak, you may need to upgrade the transformer or consider a battery-powered model.
Step 1: Choose the Right Location
Picking the perfect spot for your Ring Doorbell is crucial. A well-placed doorbell ensures clear video, reliable motion detection, and strong Wi-Fi connectivity.
Ideal Height
Mount your Ring Doorbell at a height of 48 inches (4 feet) from the ground. This is the standard height recommended by Ring and allows the camera to capture most visitors’ faces clearly. It’s also high enough to deter tampering.
Best Angle and Coverage
The doorbell should face straight ahead, not tilted up or down. If your front door is recessed or you want to cover a wider area (like a driveway or walkway), consider using a Ring Corner Kit. This angled mount lets you adjust the viewing angle up to 45 degrees left or right.
Avoid mounting the doorbell too close to walls, mailboxes, or other obstructions. You want a clear field of view of your doorstep, porch, and anyone approaching.
Check Wi-Fi Signal
Use your smartphone to check the Wi-Fi signal strength at the installation spot. Ring recommends a minimum signal strength of -65 dBm or better. If the signal is weak, consider:
- Moving your router closer
- Using a Wi-Fi extender
- Installing a Ring Chime Pro (which boosts Wi-Fi for Ring devices)
A strong connection ensures smooth live viewing, instant alerts, and reliable recording.
Step 2: Turn Off Power (For Wired Models Only)
If you’re installing a wired Ring Doorbell (like the Ring Doorbell Pro or a wired version of the Ring Doorbell 2/3/4), safety comes first. Always turn off the power before handling electrical wires.
Locate Your Circuit Breaker
Go to your home’s main electrical panel and find the breaker that controls your existing doorbell. It’s often labeled “Doorbell,” “Chime,” or “Front Door.” If unsure, turn off the main breaker to be safe.
Test the Wires
Use a voltage tester to confirm the power is off. Touch the tester to the two doorbell wires. If it lights up or beeps, the power is still on—double-check the breaker.
Never skip this step. Even low-voltage doorbell wires can cause a shock or damage your Ring device if mishandled.
Remove the Old Doorbell (If Applicable)
Unscrew and gently pull away the old doorbell from the wall. You’ll see two wires connected to terminals. Loosen the screws and disconnect the wires. Keep them separated so they don’t touch each other or the wall.
If the wires are short or frayed, use wire strippers to expose fresh copper (about 1/4 inch). This ensures a solid connection.
Step 3: Prepare the Mounting Surface
A clean, level surface ensures your Ring Doorbell stays secure and looks professional.
Clean the Area
Wipe down the wall or siding where you’ll mount the doorbell. Remove dust, dirt, or old adhesive. A clean surface helps the mount adhere better and prevents wobbling.
Check for Obstructions
Make sure there are no pipes, electrical lines, or studs behind the wall where you plan to drill. Use a stud finder if needed. Drilling into a stud is fine, but avoid plumbing or wiring.
Mark the Drill Points
Hold the mounting bracket against the wall at the desired height (48 inches). Use a pencil to mark the screw holes. Use a level to ensure the bracket is straight. Even a slight tilt can affect the camera angle and video quality.
Step 4: Drill Pilot Holes and Install Wall Anchors
Drilling pilot holes prevents the wall from cracking and makes screwing easier.
Drill the Holes
Using a drill bit slightly smaller than your screws (usually 3/32″ or 1/8″), drill into the marked spots. Go slowly and steadily. For brick, concrete, or stucco, use a masonry bit and hammer drill.
Insert Wall Anchors
If you’re mounting into drywall, plaster, or another soft material, insert the included plastic wall anchors into the holes. Tap them gently with a hammer until flush with the wall. Anchors provide extra grip and prevent screws from loosening over time.
Skip anchors if drilling into wood or metal siding—screws will hold securely on their own.
Step 5: Attach the Mounting Bracket
Now it’s time to secure the bracket that will hold your Ring Doorbell.
Align the Bracket
Hold the mounting bracket over the holes. Make sure it’s level and aligned with your pencil marks. The bracket should sit flat against the wall.
Screw It In
Use the provided screws to attach the bracket. Tighten them firmly with a screwdriver, but don’t over-tighten—this can strip the holes or crack the bracket. The mount should feel solid and not wiggle.
Use a Corner Kit (If Needed)
If you’re using a Ring Corner Kit for an angled view, attach the corner bracket first, then secure the main mounting plate to it. Follow the kit’s instructions for proper alignment.
Step 6: Connect the Wires (Wired Models Only)
This step applies only if you’re installing a wired Ring Doorbell.
Thread the Wires Through the Bracket
Feed the two doorbell wires through the center hole in the mounting bracket. This keeps them tidy and prevents pinching.
Connect to the Doorbell
On the back of your Ring Doorbell, you’ll see two terminals labeled “Front” and “Trans.” Loosen the screws, insert one wire into each terminal, and tighten the screws. It doesn’t matter which wire goes where—Ring devices are not polarity-sensitive.
Secure the Wires
Use the included wire clips or electrical tape to gently secure the wires to the wall or bracket. Avoid pulling or bending them sharply.
Step 7: Attach the Ring Doorbell to the Mount
Now for the fun part—putting your Ring Doorbell on the mount.
Slide It Into Place
Hold the Ring Doorbell with the camera facing outward. Align the slots on the back of the device with the tabs on the mounting bracket. Gently slide the doorbell down until it clicks into place.
You should feel it lock securely. Give it a light tug to confirm it’s attached.
Secure with the Security Screw
Use the included security screw and special tool to fasten the doorbell to the mount. Insert the screw into the hole at the bottom of the device and tighten it. This prevents theft and tampering.
Don’t lose the security tool—it’s small and easy to misplace. Store it in a safe place for future use.
Step 8: Turn Power Back On and Test
If you turned off the power earlier, it’s time to restore it.
Flip the Breaker
Go back to your electrical panel and turn the doorbell breaker back on. Wait a few seconds for the system to power up.
Check the Doorbell
Your Ring Doorbell should light up and begin initializing. You may hear a chime or see a light pattern indicating it’s connecting to Wi-Fi.
Open the Ring App
Launch the Ring app on your smartphone. Follow the on-screen prompts to complete setup:
- Select “Set Up a Device”
- Choose “Doorbells”
- Scan the QR code on the back of your doorbell
- Connect to your Wi-Fi network
- Name your doorbell (e.g., “Front Door”)
- Adjust motion zones and notification settings
Once connected, test the live view. Make sure the video is clear, the audio works, and motion detection is responsive.
Step 9: Adjust Angle and Fine-Tune Settings
Even small adjustments can improve performance.
Check the Camera Angle
Look at the live feed in the Ring app. Is your doorstep fully visible? Can you see visitors’ faces? If not, you may need to adjust the mount.
For minor tweaks, loosen the security screw slightly and reposition the doorbell. For major changes, consider using a Corner Kit or relocating the mount.
Set Motion Zones
In the Ring app, go to Device Settings > Motion Settings > Motion Zones. Draw zones to focus on areas like your walkway or porch. Avoid areas with frequent false triggers (like busy streets or trees).
Enable Smart Alerts
Turn on features like:
- People Only Mode (reduces false alerts)
- Motion Scheduling (only alert during certain hours)
- Linked Chimes (connect to Ring Chime or Echo devices)
These settings help you get the most out of your doorbell.
Troubleshooting Common Installation Issues
Even with careful installation, problems can arise. Here’s how to fix the most common ones.
Doorbell Won’t Power On
- Check that power is restored at the breaker.
- Verify wires are connected securely.
- Test the transformer voltage with a multimeter (should be 8–24V AC).
- For battery models, ensure the battery is charged and properly inserted.
Weak Wi-Fi Signal
- Move your router closer or use a Wi-Fi extender.
- Install a Ring Chime Pro to boost the signal.
- Avoid mounting near metal objects or thick walls.
Blurry or Dark Video
- Clean the camera lens with a soft, dry cloth.
- Ensure the doorbell isn’t facing direct sunlight or bright lights.
- Adjust the angle to reduce glare.
Doorbell Falls Off or Wobbles
- Tighten all screws, including the security screw.
- Use wall anchors if mounting into drywall.
- Ensure the mounting surface is flat and stable.
No Sound or Chime
- Check that the Ring Chime or Echo device is connected.
- Verify volume settings in the Ring app.
- For wired models, ensure the chime unit is compatible and properly wired.
Maintenance Tips for Long-Term Performance
To keep your Ring Doorbell working perfectly, regular maintenance is key.
Clean the Lens Monthly
Use a microfiber cloth to wipe away dust, dirt, or fingerprints. Avoid harsh chemicals—water or a mild glass cleaner is sufficient.
Check Mounting Screws
Every few months, inspect the screws and tighten them if loose. Weather and vibrations can cause them to loosen over time.
Update the App and Firmware
Keep the Ring app updated and allow automatic firmware updates. These improve security, performance, and add new features.
Test Monthly
Open the live view and test motion detection. Make sure alerts are working and the video quality is clear.
Conclusion
Learning how to put Ring Doorbell on mount doesn’t have to be complicated. With the right tools, a safe approach, and attention to detail, you can install your smart doorbell in under an hour. Whether you’re using a wired or battery-powered model, following these steps ensures a secure, stable, and high-performing setup.
Remember to choose the right location, turn off power when needed, use a level, and test everything before finishing. Don’t forget to secure the device with the security screw and adjust settings in the Ring app for the best experience.
A properly mounted Ring Doorbell not only enhances your home security but also gives you peace of mind. You’ll be able to see, hear, and speak to visitors from anywhere—making your home smarter and safer.
Now that you know how to put Ring Doorbell on mount, it’s time to get started. Grab your tools, follow this guide, and enjoy the benefits of modern home security.