This guide walks you through how to put Ring Doorbell on wall safely and securely, whether you’re installing a Ring Video Doorbell, Pro, or Battery model. You’ll learn the right tools, mounting techniques, and wiring tips for a clean, reliable setup.
Key Takeaways
- Choose the right model: Select a Ring Doorbell that fits your home’s power setup—battery, wired, or solar.
- Gather essential tools: You’ll need a drill, level, screwdriver, and possibly a voltage tester for hardwired models.
- Pick the ideal location: Install at chest height, 4–5 feet off the ground, with a clear view of your entryway.
- Use the mounting bracket correctly: The angle and alignment affect motion detection and video quality.
- Secure wiring safely: If hardwiring, turn off power and follow electrical safety steps to avoid shocks or damage.
- Test before finalizing: Always check Wi-Fi signal, video feed, and motion alerts after mounting.
- Maintain regularly: Clean the lens and check battery or connections every few months.
How to Put Ring Doorbell on Wall: A Complete Step-by-Step Guide
Installing a Ring Doorbell on your wall is a smart way to boost home security, monitor deliveries, and keep an eye on your front door—even when you’re not home. Whether you’re replacing an old doorbell or setting up a brand-new smart system, knowing how to put Ring Doorbell on wall correctly ensures optimal performance and a clean, professional look.
This comprehensive guide will walk you through every step of the process, from choosing the right location to testing your device. We’ll cover tools, safety tips, mounting techniques, and troubleshooting common issues. By the end, you’ll have a securely mounted Ring Doorbell that works flawlessly and looks great on your home.
Let’s get started!
Why Install a Ring Doorbell on the Wall?
Visual guide about How to Put Ring Doorbell on Wall
Image source: i.ytimg.com
Before diving into the installation, it’s helpful to understand why mounting your Ring Doorbell properly matters. A well-placed doorbell improves video quality, motion detection accuracy, and overall reliability.
When mounted correctly, your Ring Doorbell:
- Captures a wider field of view of your porch and walkway
- Reduces blind spots and false motion alerts
- Prevents tampering or theft due to secure attachment
- Looks neat and integrated with your home’s exterior
Poor installation—like mounting too low, at the wrong angle, or on an unstable surface—can lead to poor video quality, missed motion events, or even device damage. That’s why following the right steps is essential.
What You’ll Need Before You Start
Before you begin, gather all the tools and materials. Having everything ready saves time and prevents frustration mid-installation.
Basic Tools and Supplies
- Ring Doorbell kit: Includes the device, mounting bracket, screws, and anchors
- Drill with drill bits: For creating pilot holes in wood, brick, or siding
- Screwdriver (Phillips head): For tightening screws
- Level: To ensure the doorbell is straight
- Pencil: For marking drill points
- Measuring tape: To find the correct height and alignment
- Voltage tester (for wired models): To confirm power is off
- Wire strippers (if hardwiring): To prepare doorbell wires
- Safety goggles and gloves: For protection during drilling
Optional but Helpful Tools
- Stud finder: Helps locate wall studs for extra support
- Caulk or exterior sealant: To seal holes and prevent water damage
- Extension ladder: If installing above ground level
- Helper: Someone to hold the doorbell while you secure it
Choosing the Right Location
Where you mount your Ring Doorbell affects everything—from video quality to motion detection. Take time to pick the best spot.
Ideal Height and Angle
Ring recommends mounting your doorbell 4 to 5 feet above the ground. This height:
- Provides a clear view of visitors’ faces
- Reduces the chance of tampering
- Optimizes motion sensor range
Avoid mounting too high (hard to see faces) or too low (vulnerable to damage or theft).
Field of View Considerations
Stand back and look at your entryway. Your doorbell should have:
- A clear line of sight to the walkway, driveway, or sidewalk
- Minimal obstructions like plants, mailboxes, or overhangs
- Good lighting—avoid direct backlighting from the sun
If your porch is narrow, consider a angled mounting bracket (sold separately) to adjust the camera’s view.
Wi-Fi Signal Strength
Your Ring Doorbell needs a strong Wi-Fi connection. Before drilling, use your phone to check signal strength at the installation spot. If the signal is weak:
- Move your router closer
- Install a Wi-Fi extender
- Use a Ring Chime Pro (acts as a Wi-Fi booster)
A weak signal leads to laggy video, missed alerts, and frequent disconnections.
Preparing for Installation
Now that you’ve chosen the location, it’s time to prepare.
Turn Off Power (For Hardwired Models)
If you’re installing a wired Ring Doorbell (like the Ring Video Doorbell Pro), turn off the power at the circuit breaker. Then use a voltage tester on the existing doorbell wires to confirm no electricity is flowing.
Never skip this step—electrical shock can be dangerous.
Remove the Old Doorbell (If Applicable)
Unscrew and remove your existing doorbell. Disconnect the wires carefully, and tape the ends to prevent them from slipping back into the wall.
If you’re not using the old wires (e.g., for a battery-powered model), cap them with wire nuts and tuck them safely into the wall.
Check Wall Material
Different surfaces require different mounting techniques:
- Wood or siding: Easy to drill into; use the included screws
- Brick or concrete: Use masonry drill bits and wall anchors
- Stucco: Drill carefully to avoid cracking; use anchors
For brick or concrete, a hammer drill works best. For wood, a standard drill is fine.
Step-by-Step: How to Put Ring Doorbell on Wall
Now for the main event—mounting your Ring Doorbell. Follow these steps carefully.
Step 1: Attach the Mounting Bracket
The mounting bracket holds your doorbell securely. It also allows for angle adjustments.
- Hold the bracket against the wall at the desired height
- Use a level to ensure it’s straight
- Mark the screw holes with a pencil
- Drill pilot holes (use a smaller bit than the screws)
- Insert wall anchors if needed (for brick, concrete, or drywall)
- Secure the bracket with screws using a screwdriver or drill
Tip: Don’t overtighten the screws—this can crack the bracket or wall surface.
Step 2: Connect the Wires (For Hardwired Models)
If you’re using a wired Ring Doorbell:
- Strip about 1/4 inch of insulation from the doorbell wires
- Connect them to the terminals on the back of the Ring device
- Most models are polarity-insensitive, but check your manual
- Tuck excess wire neatly into the wall
For battery-powered models, skip this step—just insert the battery.
Step 3: Attach the Ring Doorbell to the Bracket
- Slide the Ring Doorbell onto the mounting bracket
- Push it firmly until it clicks into place
- Use the security screw (included) to lock it in
This screw prevents thieves from easily removing your device.
Step 4: Adjust the Angle (If Needed)
If your doorbell isn’t pointing straight ahead:
- Loosen the bracket screws slightly
- Tilt the bracket to the desired angle (up to 15 degrees)
- Retighten the screws
Use the Ring app’s live view to check the angle before finalizing.
Setting Up the Ring App
Mounting is only half the job. Now you need to connect your doorbell to the Ring app.
Download and Open the Ring App
Available on iOS and Android, the Ring app guides you through setup.
Create or Log In to Your Account
If you’re new, sign up with your email. Existing users can log in.
Add Your Device
- Tap “Set Up a Device”
- Select “Doorbells”
- Scan the QR code on your Ring device (found on the back or in the box)
- Follow the on-screen instructions
The app will prompt you to connect to Wi-Fi, name your doorbell, and set up motion zones.
Test the Connection
Once connected:
- Check the live video feed
- Test motion detection by walking in front
- Verify two-way audio by speaking through the app
If anything isn’t working, go to the troubleshooting section below.
Powering Your Ring Doorbell
Ring offers different power options. Choose the one that fits your home.
Battery-Powered Models
- Use the rechargeable battery included
- Charge fully before first use (takes 5–10 hours)
- Lasts 6–12 months per charge, depending on use
Tip: Enable “Motion Scheduling” in the app to reduce battery drain.
Hardwired Models
- Connect to existing doorbell wires
- Requires 8–24V AC power
- No need to charge—always on
If your existing transformer is too weak, you may need to upgrade it.
Solar Panel Option
Ring sells a solar panel accessory that charges the battery daily. Ideal for sunny areas.
Securing and Finishing Touches
Once installed, make sure everything is secure and weatherproof.
Seal Drill Holes
Use exterior caulk or silicone sealant around the screw holes to prevent water from entering the wall.
Check for Gaps
Ensure the doorbell sits flush against the wall. Gaps can let in moisture or pests.
Label Wires (If Applicable)
If you ever need to remove the doorbell, label the wires so you know which is which.
Troubleshooting Common Issues
Even with careful installation, problems can happen. Here’s how to fix the most common ones.
Doorbell Won’t Turn On
- Check battery level (for battery models)
- Verify power is on at the breaker (for wired models)
- Ensure wires are connected properly
Poor Wi-Fi Connection
- Move closer to the router during setup
- Use a Wi-Fi extender or Ring Chime Pro
- Restart your router
Blurry or Dark Video
- Clean the lens with a microfiber cloth
- Adjust angle to avoid direct sunlight
- Check for condensation inside the lens (rare, but possible)
Motion Alerts Not Working
- Check motion zones in the app
- Ensure the sensor isn’t blocked
- Update the app and firmware
Doorbell Falls Off
- Use the security screw
- Ensure wall anchors are properly installed
- Avoid mounting on loose or rotting wood
Maintenance Tips for Long-Term Use
To keep your Ring Doorbell working well:
- Clean the lens monthly with a soft, dry cloth
- Check battery level every 2–3 months
- Inspect screws and brackets for looseness
- Update the app and firmware regularly
- Trim nearby plants that block the view
Regular care prevents issues and extends the life of your device.
Final Thoughts
Learning how to put Ring Doorbell on wall doesn’t have to be complicated. With the right tools, a good location, and careful steps, you can install a secure, high-performing smart doorbell in under an hour.
Remember: safety first (especially with electricity), double-check your Wi-Fi signal, and test everything before calling the job done. A well-installed Ring Doorbell not only protects your home but also gives you peace of mind.
Whether you’re a DIY beginner or a seasoned home improver, this guide gives you everything you need for a successful installation. Now go enjoy your smarter, safer front door!