Installing a Ring Doorbell with an angle mount ensures optimal video coverage on uneven or angled surfaces. This guide walks you through every step—from choosing the right mount to final setup—so you can secure your home with confidence.
Key Takeaways
- Angle mounts fix alignment issues: They help position your Ring Doorbell correctly on sloped walls, corners, or recessed doorframes.
- Choose the right angle: Ring offers 5°, 10°, 15°, and 30° mounts—pick based on your wall’s slope for best viewing angle.
- Turn off power first: Always shut off electricity at the breaker before wiring to avoid shocks or damage.
- Use the Ring app for setup: The app guides installation, tests Wi-Fi, and helps adjust motion zones after mounting.
- Secure mounting prevents wobble: Tighten screws properly and use anchors if drilling into brick or concrete.
- Test before finalizing: Check video quality and motion detection range before finishing the install.
- Troubleshoot common issues: If the doorbell doesn’t power on or Wi-Fi is weak, check wiring, signal strength, or reset the device.
How to Install Ring Doorbell with Angle Mount
Installing a Ring Doorbell is a smart way to boost your home security—but what if your doorframe is recessed, your wall slopes, or your front door sits at an awkward angle? That’s where the Ring Doorbell angle mount comes in. This simple accessory lets you adjust the viewing angle of your doorbell so you get a clear, wide shot of anyone approaching your door—no blind spots.
Whether you’re installing a Ring Video Doorbell (2nd Gen), Ring Doorbell Pro, or Ring Doorbell Elite, the angle mount can make all the difference. In this complete guide, we’ll walk you through every step of installing your Ring Doorbell with an angle mount—from planning and prep to final testing. You’ll learn how to choose the right angle, safely wire your device, secure it to tricky surfaces, and troubleshoot common issues. By the end, your Ring Doorbell will be perfectly positioned and ready to protect your home.
Let’s get started!
Why Use an Angle Mount with Your Ring Doorbell?
Visual guide about How to Install Ring Doorbell with Angle Mount
Image source: reviewed-com-res.cloudinary.com
Before diving into the installation, it’s important to understand why you might need an angle mount in the first place. Not all homes are built the same. Some have:
- Recessed doorframes (where the door is set back from the wall)
- Sloped or uneven exterior walls
- Corners or narrow entryways
- Brick, stone, or concrete surfaces that make flat mounting difficult
In these cases, mounting your Ring Doorbell directly to the wall might result in a skewed view—like only seeing someone’s shoulder or the top of their head. An angle mount solves this by tilting the doorbell forward or sideways, giving you a better, more usable field of view.
Ring offers several angle mount options, including 5°, 10°, 15°, and 30° angles. The steeper the angle, the more you’re compensating for a deeply recessed or sloped surface. For most homes, a 10° or 15° mount works well. But if your door is set back significantly—say, more than 2 inches—you might need the 30° version.
Using an angle mount also helps with motion detection. If your doorbell is pointing too high or too low, it might miss people walking up or trigger false alerts from cars or trees. Proper angling ensures the motion zones cover the walkway and driveway effectively.
What You’ll Need Before You Begin
Before you start drilling or wiring, gather all the tools and materials. Having everything ready will make the process smoother and safer.
Tools and Materials
- Ring Doorbell (compatible model)
- Ring Angle Mount (5°, 10°, 15°, or 30°)
- Screwdriver (Phillips head)
- Drill with drill bits (for wood, brick, or concrete)
- Wall anchors (if mounting into brick, concrete, or drywall)
- Level (to ensure straight mounting)
- Pencil (for marking drill points)
- Voltage tester (to confirm power is off)
- Smartphone with Ring app installed
- Ladder (if installing above ground level)
- Safety goggles and gloves (recommended)
Check Compatibility
Not all Ring Doorbells work with every angle mount. Most newer models—including Ring Video Doorbell (2nd Gen), Ring Doorbell Pro, Ring Doorbell Pro 2, and Ring Doorbell Elite—are compatible with Ring’s official angle mounts. However, older models like the original Ring Video Doorbell may require adapters or third-party mounts.
Always check the product packaging or Ring’s website to confirm compatibility before purchasing. Using an incompatible mount could damage your device or void the warranty.
Choose the Right Angle
Ring’s angle mounts come in four options:
- 5° mount: For minor adjustments—ideal if your doorframe is only slightly recessed.
- 10° mount: Great for moderate slopes or small setbacks. A popular choice for most homes.
- 15° mount: Best for deeper recesses or steeper walls. Offers a noticeable tilt.
- 30° mount: For extreme angles—use only if your door is set back 2+ inches or the wall slopes sharply.
If you’re unsure, start with a 10° or 15° mount. You can always adjust later.
Step 1: Turn Off Power and Remove Old Doorbell (If Applicable)
Safety first! If you’re replacing an existing doorbell, you must turn off the power before touching any wires.
Locate Your Breaker Box
Find your home’s electrical panel (usually in the basement, garage, or utility room). Look for the breaker labeled “doorbell,” “front door,” or something similar. If it’s not labeled, you may need to test breakers one by one.
Turn Off the Power
Switch the correct breaker to the “OFF” position. Use a voltage tester on the doorbell wires to confirm no electricity is flowing. This step is crucial—even low-voltage doorbell circuits can cause shocks or damage your Ring device.
Remove the Old Doorbell
Unscrew the existing doorbell from the wall. Gently pull it away to expose the wires. Don’t cut the wires—just disconnect them from the terminals. Wrap the exposed ends with electrical tape to prevent short circuits.
If there’s no existing doorbell, you’ll need to run wires from your transformer (usually near your furnace or electrical panel) to the door. This is more complex and may require professional help. Most Ring Doorbells can also run on battery, so wiring isn’t always necessary.
Step 2: Plan Your Mounting Location
Where you install your Ring Doorbell affects everything—from video quality to motion detection. Take time to plan the best spot.
Ideal Height
Mount your doorbell between 48 and 60 inches from the ground. This height captures most people’s faces and avoids tampering. If you have tall visitors or packages left high on the doorstep, go closer to 60 inches.
Check Wi-Fi Signal
Use your smartphone to test Wi-Fi strength at the installation spot. Ring Doorbells need a strong 2.4 GHz signal (5 GHz is not supported). If the signal is weak, consider:
- Moving your router closer
- Using a Wi-Fi extender
- Choosing a battery-powered model (which can be placed farther from the router)
Consider Sun and Weather
Avoid mounting in direct sunlight, which can cause glare or overheating. Also, protect the doorbell from heavy rain or snow if possible. Most Ring models are weather-resistant, but extreme conditions can affect performance.
Test the Angle
Hold the angle mount against the wall at your chosen height and angle. Look through the camera’s expected field of view (about 155° diagonal). Make sure it covers the walkway, driveway, and anyone approaching the door. Adjust the angle if needed.
Step 3: Install the Angle Mount
Now it’s time to attach the angle mount to your wall. This step varies slightly depending on your wall material.
Mark Drill Points
Hold the angle mount against the wall at your planned location. Use a level to ensure it’s straight. Mark the screw holes with a pencil.
Drill Pilot Holes
Using a drill bit slightly smaller than your screws, drill pilot holes at the marked spots. This prevents wood from splitting and makes screwing easier.
Use Wall Anchors (If Needed)
If you’re drilling into drywall, brick, or concrete, insert wall anchors into the pilot holes. These provide extra support and prevent screws from loosening over time.
Attach the Angle Mount
Line up the mount with the holes and screw it into place using the provided screws. Don’t overtighten—this can crack the mount or strip the screws. Make sure it’s secure and doesn’t wobble.
Double-Check the Angle
Once mounted, verify the angle is correct. If it’s off, loosen the screws slightly, adjust, and retighten.
Step 4: Connect the Wires and Mount the Doorbell
With the angle mount in place, it’s time to connect your Ring Doorbell.
Prepare the Wires
Remove the electrical tape from the doorbell wires. Strip about 1/4 inch of insulation from each wire if needed.
Attach Wires to the Doorbell
Most Ring Doorbells have two terminals: “Front” and “Trans.” Connect the wires to these terminals—it doesn’t matter which wire goes where. Tighten the screws to secure the connections.
Mount the Doorbell to the Angle Mount
Slide the Ring Doorbell onto the angle mount. It should click into place. Secure it with the included security screw using a screwdriver. This prevents theft.
Turn Power Back On
Go back to your breaker box and turn the power back on. The doorbell should light up or chime, indicating it’s receiving power.
Step 5: Set Up the Ring Doorbell Using the App
The Ring app is your control center for setup, customization, and monitoring.
Download and Open the Ring App
If you haven’t already, download the Ring app from the App Store (iOS) or Google Play (Android). Create an account or log in.
Add a New Device
Tap the “+” icon and select “Set up a device.” Choose “Doorbells” and follow the prompts. The app will guide you through connecting to Wi-Fi, naming your doorbell, and setting up motion zones.
Test the Connection
The app will test the Wi-Fi signal and confirm the doorbell is online. If it fails, move closer to your router or use an extender.
Adjust Motion Zones
Use the app to define where you want motion detection. Avoid areas like busy streets or trees that could trigger false alerts.
Enable Notifications
Turn on push notifications so you’re alerted when someone approaches or rings the bell.
Step 6: Final Checks and Adjustments
Before calling the job done, do a few final checks.
Test the Video Feed
Open the app and view the live feed. Check for clarity, lighting, and angle. Make sure the entire walkway is visible.
Test Motion Detection
Walk in front of the doorbell to see if it detects motion and sends an alert. Adjust sensitivity in the app if needed.
Check Night Vision
Test the doorbell at night or in low light. The infrared LEDs should provide a clear black-and-white image.
Secure All Screws
Double-check that all screws—on the mount and the doorbell—are tight. Loose parts can cause vibration or damage.
Troubleshooting Common Issues
Even with careful installation, problems can happen. Here’s how to fix the most common ones.
Doorbell Won’t Power On
- Check that the breaker is on.
- Verify wires are connected securely.
- Test the voltage with a multimeter (should be 8–24V AC).
- Try a battery-powered setup if wiring is faulty.
Weak Wi-Fi Signal
- Move your router closer.
- Use a Wi-Fi extender.
- Switch to a 2.4 GHz network (not 5 GHz).
- Reposition the doorbell closer to the router.
Blurry or Glared Video
- Clean the camera lens with a soft cloth.
- Adjust the angle to avoid direct sunlight.
- Use the “Night Vision” setting in low light.
False Motion Alerts
- Adjust motion zones in the app.
- Lower motion sensitivity.
- Trim bushes or trees near the detection area.
Doorbell Falls Off or Wobbles
- Tighten all screws.
- Use longer or stronger screws for brick/concrete.
- Add extra wall anchors for support.
Conclusion
Installing a Ring Doorbell with an angle mount might seem tricky at first, but with the right tools and guidance, it’s totally doable—even for beginners. The angle mount ensures your doorbell captures the best possible view, no matter how your home is built. From choosing the right angle to wiring, mounting, and app setup, every step matters for optimal performance.
Remember: safety first (always turn off power), plan your location carefully, and test everything before finishing. If you run into issues, the Ring app and customer support are great resources.
Once installed, your Ring Doorbell will give you peace of mind, letting you see, hear, and speak to visitors from anywhere. Whether you’re home or away, you’ll always know who’s at the door.
So grab your tools, follow this guide, and enjoy a smarter, safer home—starting right at your front door.