This guide walks you through how to mount Ring Doorbell Plus safely and correctly, whether you’re replacing an old doorbell or installing one for the first time. You’ll learn about tools, wiring, mounting options, and app setup to ensure your smart doorbell works perfectly from day one.
Key Takeaways
- Choose the right location: Mount your Ring Doorbell Plus at chest height (48 inches) and within Wi-Fi range for optimal performance and video quality.
- Gather essential tools: You’ll need a drill, screwdriver, level, wire strippers, and possibly a voltage tester—especially if working with existing wiring.
- Use the correct mounting bracket: The Ring Doorbell Plus includes angled brackets to adjust the viewing angle and avoid blind spots.
- Secure wiring properly: If using wired power, ensure connections are tight and insulated to prevent short circuits or power loss.
- Complete setup via the Ring app: Finalize installation by connecting to Wi-Fi, testing motion detection, and customizing settings in the app.
- Troubleshoot common issues: Problems like poor video, weak signal, or failed syncing can often be fixed with simple adjustments or resets.
- Consider professional help if needed: If you’re unsure about electrical work, hiring an electrician ensures safety and compliance with local codes.
How to Mount Ring Doorbell Plus: A Complete Step-by-Step Guide
So, you’ve got your shiny new Ring Doorbell Plus and you’re ready to upgrade your home security. Great choice! The Ring Doorbell Plus offers 1080p HD video, two-way audio, advanced motion detection, and seamless integration with Alexa. But before you can start seeing who’s at your door, you need to mount it properly.
Don’t worry—this guide will walk you through how to mount Ring Doorbell Plus like a pro, whether you’re replacing an old doorbell or installing one from scratch. We’ll cover everything: tools, wiring, mounting angles, app setup, and troubleshooting. By the end, your doorbell will be securely installed and ready to protect your home.
Let’s get started!
What You’ll Need Before You Begin
Visual guide about How to Mount Ring Doorbell Plus
Image source: safewise.com
Before you grab your drill, make sure you have all the necessary tools and materials. Having everything ready will save time and prevent frustration.
Essential Tools
- Drill with drill bits: For making pilot holes in wood, brick, or siding.
- Screwdriver (Phillips head): For tightening screws on the mounting bracket and doorbell.
- Level: To ensure your doorbell is straight—important for both appearance and camera angle.
- Wire strippers: If you’re connecting to existing doorbell wires.
- Voltage tester: To check if your current doorbell wiring is live (safety first!).
- Pencil or marker: For marking drill spots.
- Tape measure: To find the ideal mounting height.
Included in the Box
When you open your Ring Doorbell Plus package, you should find:
- Ring Doorbell Plus unit
- Mounting bracket (standard and angled options)
- Screws and anchors
- Wire nuts
- Security screw and tool
- User guide and quick start card
Optional but Helpful
- Smartphone with Ring app installed: Download it from the App Store or Google Play.
- Wi-Fi network name and password: You’ll need this during setup.
- Ladder or step stool: Depending on your door height.
- Electrical tape: For extra wire insulation.
- Wall anchors: If mounting on drywall or masonry without existing holes.
Step 1: Choose the Best Location
Where you mount your Ring Doorbell Plus makes a big difference in performance. A poor location can lead to blind spots, weak Wi-Fi, or frequent false alerts.
Ideal Mounting Height
Ring recommends mounting the doorbell at 48 inches (4 feet) from the ground. This height captures most visitors’ faces clearly and reduces the chance of tampering.
Wi-Fi Signal Strength
Your doorbell needs a strong Wi-Fi connection to stream video and send alerts. Test your signal at the installation spot using your phone. If the signal is weak:
- Move your router closer.
- Use a Wi-Fi extender.
- Consider a Ring Chime Pro (acts as a Wi-Fi booster).
Avoid These Spots
- Direct sunlight: Can cause overheating and glare in videos.
- Near windows or reflective surfaces: May create glare or false motion alerts.
- Too close to door frame or trim: Can block the camera’s field of view.
- Behind obstructions: Trees, plants, or decorations can block the lens.
Check Local Regulations
Some neighborhoods or homeowner associations have rules about doorbell placement. Make sure your installation complies with local guidelines.
Step 2: Turn Off Power (If Using Wired Installation)
If you’re connecting your Ring Doorbell Plus to existing doorbell wiring, safety is critical. Electricity and water don’t mix—and neither do live wires and fingers.
Locate Your Doorbell Transformer
Most doorbells run on low-voltage power (8–24 volts) from a transformer, usually found in your basement, garage, or electrical panel.
Turn Off the Circuit
- Go to your main electrical panel.
- Find the breaker labeled “doorbell” or “chime.” If unsure, turn off the main power temporarily.
- Use a voltage tester on the doorbell wires to confirm power is off.
Pro Tip: Even though doorbell voltage is low, it’s still wise to treat it like any other electrical work. When in doubt, call an electrician.
Step 3: Remove Your Old Doorbell (If Applicable)
If you’re replacing an existing doorbell, you’ll need to remove it first.
Unscrew the Old Unit
Use a screwdriver to remove the screws holding the old doorbell in place. Gently pull it away from the wall.
Disconnect the Wires
You’ll see two thin wires connected to the back. Loosen the screws or pull them out of the terminals. Don’t cut them! You’ll need them to power your Ring Doorbell Plus.
Secure the Wires
Tape the loose wires to the wall or use wire nuts to cap them temporarily. This prevents them from slipping back into the wall.
Patch Old Holes (Optional)
If the old mounting holes don’t align with the Ring bracket, you may need to fill them with spackle or wood filler and drill new ones.
Step 4: Install the Mounting Bracket
The mounting bracket is the backbone of your installation. It holds the doorbell securely and allows for angle adjustments.
Choose the Right Bracket
The Ring Doorbell Plus comes with three bracket options:
- Standard bracket: For flat surfaces.
- 15-degree angled bracket: Tilts the camera left or right.
- 30-degree angled bracket: For wider angles or corner mounting.
Use the angled brackets if your door is set back or if you want to capture more of your porch or walkway.
Position the Bracket
Hold the bracket against the wall at 48 inches high. Use a level to make sure it’s straight. Mark the screw holes with a pencil.
Drill Pilot Holes
Use a drill bit slightly smaller than your screws to create pilot holes. This prevents splitting wood and makes screwing easier.
Secure the Bracket
Insert wall anchors if needed (especially for drywall or brick). Then screw the bracket into place using the provided screws. Make sure it’s tight and doesn’t wobble.
Pro Tip: If mounting on brick or concrete, use a masonry drill bit and plastic anchors for a secure hold.
Step 5: Connect the Wires (Wired Installation)
Now it’s time to connect your Ring Doorbell Plus to power.
Strip the Wire Ends
Use wire strippers to remove about 1/4 inch of insulation from each wire. This exposes the copper for a solid connection.
Attach Wires to the Bracket
The mounting bracket has two small terminals. Loosen the screws, insert the stripped wires, and tighten them down. It doesn’t matter which wire goes where—Ring doorbells are not polarity-sensitive.
Secure with Wire Nuts (Optional)
For extra safety, twist the wires together and cover them with a wire nut. Then tape the connection with electrical tape.
Test the Connection
Turn the power back on briefly to see if the doorbell lights up. If it does, turn the power off again before mounting the unit.
Step 6: Mount the Ring Doorbell Plus
With the bracket in place and wires connected, it’s time to attach the doorbell.
Align the Doorbell
Hold the Ring Doorbell Plus against the bracket. The hooks on the back of the unit should slide into the slots on the bracket.
Slide Down to Lock
Gently press the doorbell against the bracket and slide it downward until it clicks into place. You should feel it lock securely.
Secure with Security Screw
Use the included security screw and tool to fasten the bottom of the doorbell. This prevents theft and tampering.
Pro Tip: Don’t overtighten the security screw—just snug it enough to prevent removal.
Step 7: Power On and Test
Now that everything is mounted, it’s time to bring your doorbell to life.
Turn Power Back On
Go to your electrical panel and restore power to the doorbell circuit.
Wait for the Light
The Ring Doorbell Plus has a light ring on the front. It will pulse white when powering on. This means it’s receiving power and initializing.
Check for Solid Light
After a minute or two, the light should turn solid white. This indicates the doorbell is ready to connect to Wi-Fi.
Step 8: Set Up the Ring App
The Ring app is your control center for everything—live view, motion settings, alerts, and more.
Download and Open the App
If you haven’t already, download the Ring app on your smartphone. Create an account or log in.
Tap “Set Up a Device”
Select “Doorbells” and then “Ring Video Doorbell Plus.”
Scan the QR Code
Use your phone’s camera to scan the QR code on the back of your doorbell or in the app. This pairs the device with your account.
Connect to Wi-Fi
Follow the prompts to connect your doorbell to your home Wi-Fi network. Make sure you’re on a 2.4 GHz network—Ring devices don’t support 5 GHz.
Name Your Doorbell
Give it a name like “Front Door” or “Main Entrance” for easy identification.
Complete Setup
The app will guide you through motion zones, alert preferences, and chime settings. Take your time to customize these for your needs.
Step 9: Adjust Settings and Test Features
Once setup is complete, fine-tune your doorbell for the best experience.
Test Live View
Open the app and tap “Live View” to see the camera feed. Check for clarity, lighting, and field of view.
Test Two-Way Audio
Speak into your phone and listen through the doorbell. Ask someone to stand at the door and test the audio both ways.
Trigger Motion Detection
Walk in front of the doorbell to see if it detects motion and sends an alert. Adjust motion zones in the app if needed.
Test the Chime
Press the doorbell button. If you have a Ring Chime or Chime Pro, it should ring. If using wired power, your existing doorbell chime should sound (if compatible).
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix the most common ones.
Doorbell Won’t Power On
- Check that power is restored at the breaker.
- Verify wire connections are tight and not loose.
- Use a voltage tester to confirm the transformer is outputting 8–24 volts.
- If using a battery, ensure it’s fully charged.
Poor Wi-Fi Signal
- Move your router closer or use a Wi-Fi extender.
- Switch to a less congested Wi-Fi channel.
- Consider a Ring Chime Pro for boosted signal.
Blurry or Dark Video
- Clean the camera lens with a soft, dry cloth.
- Adjust the angle to avoid direct sunlight or glare.
- Enable “HDR” in the app for better lighting balance.
Motion Alerts Not Working
- Check motion zones in the app—make sure they cover the desired area.
- Ensure “Motion Alerts” are turned on.
- Test during daylight first—some settings may differ at night.
Doorbell Button Not Responding
- Make sure the button isn’t stuck or obstructed.
- Re-pair the device in the app.
- Reset the doorbell by holding the setup button for 20 seconds.
Maintenance Tips for Long-Term Performance
To keep your Ring Doorbell Plus working smoothly, follow these maintenance tips:
- Clean the lens monthly: Use a microfiber cloth to remove dust, dirt, or spiderwebs.
- Check Wi-Fi signal quarterly: Move or boost your router if signal weakens.
- Update firmware regularly: The app will notify you of updates—install them promptly.
- Inspect wiring annually: Ensure connections are secure and not corroded.
- Replace battery if needed: The Ring Doorbell Plus can run on battery, but wired power is recommended for reliability.
When to Call a Professional
While most people can install a Ring Doorbell Plus themselves, some situations call for expert help:
- You’re uncomfortable working with electrical wiring.
- Your home has complex wiring or no existing doorbell circuit.
- You need to run new wires through walls or masonry.
- You want to integrate with a hardwired chime system.
A licensed electrician can ensure safe, code-compliant installation—especially in older homes.
Conclusion
Mounting your Ring Doorbell Plus doesn’t have to be intimidating. With the right tools, a clear plan, and this step-by-step guide, you can install it confidently in under an hour. From choosing the perfect spot to connecting wires and setting up the app, every step brings you closer to smarter, safer home security.
Remember: how to mount Ring Doorbell Plus isn’t just about hardware—it’s about optimizing performance, ensuring safety, and customizing your experience. Take your time, follow the instructions, and don’t hesitate to troubleshoot or seek help when needed.
Once installed, you’ll enjoy peace of mind knowing you can see, hear, and speak to anyone at your door—whether you’re home or halfway around the world. Welcome to the future of doorbells!