How to Change Ssid on a Ring Doorbell

How to Change Ssid on a Ring Doorbell

by

Changing the SSID on your Ring Doorbell is essential for maintaining a secure and reliable connection. This guide walks you through the entire process, from accessing your device settings to reconnecting to a new network, with troubleshooting tips included.

Key Takeaways

  • Why change your SSID: Updating your Wi-Fi network name (SSID) improves security, reduces interference, and ensures your Ring Doorbell stays connected to the right network.
  • Use the Ring app: All SSID changes are managed through the official Ring app—no need to access your router directly from the device.
  • Prepare your new network: Make sure your new Wi-Fi network is active, within range, and uses a compatible frequency (2.4 GHz recommended).
  • Reconnect after SSID change: After changing your home network name, you must reconnect your Ring Doorbell to the new SSID through the app.
  • Check signal strength: A weak Wi-Fi signal can cause disconnections—place your router closer or use a Wi-Fi extender if needed.
  • Troubleshoot common issues: If your doorbell won’t connect, try rebooting it, restarting your router, or resetting the device to factory settings.
  • Keep firmware updated: Regular updates improve compatibility and performance—ensure your Ring Doorbell is running the latest software.

How to Change SSID on a Ring Doorbell

If you’ve recently changed your Wi-Fi network name (SSID) or are setting up a new router, you’ll need to update your Ring Doorbell to connect to the new network. The SSID is the name of your wireless network that appears when you search for Wi-Fi on your phone or computer. When this name changes, your Ring Doorbell won’t automatically recognize the new network—even if the password is the same.

This guide will walk you through the complete process of changing the SSID on your Ring Doorbell. Whether you’re upgrading your internet setup, improving home security, or troubleshooting connectivity issues, reconnecting your doorbell to a new network name is a simple but crucial step. We’ll cover everything from preparation to reconnection, plus tips to avoid common pitfalls.

By the end of this guide, you’ll know exactly how to change the SSID on your Ring Doorbell using the Ring app, ensure a strong connection, and keep your smart doorbell working reliably. Let’s get started!

Why You Might Need to Change the SSID on Your Ring Doorbell

How to Change Ssid on a Ring Doorbell

Visual guide about How to Change Ssid on a Ring Doorbell

Image source: wizcase.com

There are several reasons why you might need to change the SSID your Ring Doorbell is connected to:

  • Upgraded your router: New routers often come with default network names like “NETGEAR-5G” or “LinksysXXXX.” You may want to personalize this name for easier identification.
  • Improved security: Using a unique SSID helps prevent unauthorized access and makes it harder for attackers to guess your network type or brand.
  • Reduced interference: If multiple networks in your area have similar names (like “HomeWiFi”), changing yours can help your devices connect to the correct one.
  • Moved to a new home: Your new residence likely has a different Wi-Fi setup, requiring your Ring Doorbell to connect to a new SSID.
  • Troubleshooting connectivity: Sometimes, reconnecting to a fresh network name resolves persistent dropouts or poor video quality.

Regardless of your reason, the process is straightforward—but it requires careful attention to detail. Let’s go over what you’ll need before starting.

What You’ll Need Before Changing the SSID

Before you begin, make sure you have the following:

  • A smartphone or tablet: You’ll use the Ring app (available on iOS and Android) to manage your doorbell settings.
  • Access to your new Wi-Fi network: Know the new SSID name and password. Write them down if needed.
  • Your Ring Doorbell powered on: Ensure the device has sufficient battery or is hardwired and receiving power.
  • Stable internet connection: Your phone should be connected to the same network you plan to assign to the doorbell (or at least able to switch between networks).
  • Router access (optional): If you’re changing the SSID yourself, you may need to log into your router’s admin panel—usually via a web browser.

Having these items ready will make the process smoother and reduce the chance of errors.

Step 1: Change Your Wi-Fi Network Name (SSID)

If you haven’t already changed your Wi-Fi network name, you’ll need to do that first. This is done through your router’s settings—not the Ring app. Here’s how:

Access Your Router’s Admin Panel

  1. Connect your phone or computer to your current Wi-Fi network.
  2. Open a web browser (Chrome, Safari, Firefox, etc.).
  3. Type your router’s IP address into the address bar. Common addresses include 192.168.1.1, 192.168.0.1, or 10.0.0.1. Check your router’s manual if unsure.
  4. Log in using your admin username and password. If you haven’t changed these, defaults are often “admin” for both fields—but check the label on your router.

Locate the Wireless Settings

  1. Once logged in, look for a section labeled “Wireless,” “Wi-Fi,” or “Network Settings.”
  2. Find the field for “SSID” or “Network Name.”
  3. Enter your new desired network name. Avoid spaces or special characters—use letters, numbers, and hyphens only.
  4. Save the changes. Your router may restart automatically.

Tip: Use a name that’s easy to identify but doesn’t include personal information like your address or full name (e.g., “SmithFamilyWiFi” is better than “123MainSt”).

Reconnect Your Devices

After changing the SSID, all devices—including your phone—will disconnect from Wi-Fi. Reconnect your phone to the new network using the same password (unless you changed that too).

Now that your new SSID is active, it’s time to reconnect your Ring Doorbell.

Step 2: Open the Ring App and Locate Your Doorbell

The Ring app is your control center for all Ring devices. Here’s how to access your doorbell settings:

Launch the Ring App

  1. Open the Ring app on your smartphone or tablet.
  2. Log in with your Ring account credentials (email and password).
  3. If you have multiple Ring devices, tap the menu icon (usually three lines in the top-left corner) to see a list of your devices.
  4. Select your Ring Doorbell from the list.

Navigate to Device Health

  1. On the doorbell’s main screen, look for the “Device Health” option. It’s usually represented by a signal bar icon or found under “Settings.”
  2. Tap “Device Health” to view connection status, battery level, and Wi-Fi signal strength.

If your doorbell is still connected to the old SSID, you’ll see it listed under “Network.” Now, let’s change it.

Step 3: Start the Wi-Fi Setup Process

To connect your Ring Doorbell to the new SSID, you’ll need to reconfigure its Wi-Fi settings. Here’s how:

Begin Setup Mode

  1. In the Ring app, go to “Device Settings” for your doorbell.
  2. Tap “Wi-Fi Network” or “Change Wi-Fi Network.”
  3. Select “Set Up a New Wi-Fi Network.”
  4. The app will prompt you to put your doorbell into setup mode.

Activate Setup Mode on the Doorbell

  1. On your Ring Doorbell, locate the orange setup button. It’s usually on the back or side of the device, depending on the model.
  2. Press and hold the button for about 5–10 seconds until the light ring on the front flashes white.
  3. Release the button. The doorbell is now in setup mode and ready to connect to a new network.

Note: If your doorbell doesn’t have a physical button (like some Ring Video Doorbell Pro models), the app may guide you through an alternative method, such as scanning a QR code.

Step 4: Connect to the New SSID

Now that your doorbell is in setup mode, the Ring app will search for available Wi-Fi networks. Follow these steps to connect it to your new SSID:

Select Your New Network

  1. The app will display a list of nearby Wi-Fi networks.
  2. Find and tap your new SSID from the list.
  3. If your network doesn’t appear, make sure your phone is connected to the same 2.4 GHz band (Ring devices typically don’t support 5 GHz).

Enter the Wi-Fi Password

  1. When prompted, enter the password for your new Wi-Fi network.
  2. Double-check for typos—passwords are case-sensitive.
  3. Tap “Connect” or “Next.”

Wait for Confirmation

  1. The app will attempt to connect your doorbell to the new network.
  2. This may take 30–60 seconds. You’ll see a progress bar or status message.
  3. If successful, you’ll receive a confirmation message: “Your device is now connected to [New SSID].”

Tip: If the connection fails, try moving closer to your router or temporarily disabling other devices that might interfere with the signal.

Step 5: Verify the Connection

Once connected, it’s important to confirm that your Ring Doorbell is working properly with the new SSID.

Check Device Health

  1. Return to the “Device Health” section in the Ring app.
  2. Look for the “Network” field—it should now display your new SSID.
  3. Check the signal strength indicator. A full or mostly full bar means a strong connection.

Test Live View

  1. Tap “Live View” on your doorbell’s main screen.
  2. Wait for the video feed to load. This may take a few seconds.
  3. If the video appears clearly and responds to motion, your connection is working.

Test Motion and Chime Alerts

  1. Walk in front of the doorbell to trigger motion detection.
  2. Check if you receive a notification on your phone.
  3. If you have a Ring Chime, ensure it rings when the doorbell is pressed.

If everything works, congratulations—you’ve successfully changed the SSID on your Ring Doorbell!

Troubleshooting Common Issues

Sometimes, things don’t go as planned. Here are solutions to the most common problems:

Doorbell Won’t Connect to New SSID

  • Check Wi-Fi band: Ring Doorbells only work on 2.4 GHz networks. If your new SSID is 5 GHz only, create a separate 2.4 GHz network or enable dual-band broadcasting on your router.
  • Restart devices: Power cycle your router, phone, and doorbell. Wait 30 seconds before turning them back on.
  • Move closer to router: Weak signals cause connection failures. Try the setup process within 10–15 feet of your router.

App Can’t Find the New SSID

  • Ensure network is broadcasting: Some routers hide the SSID. Log into your router and make sure “SSID Broadcast” is enabled.
  • Refresh the list: In the Ring app, tap “Refresh” or “Scan Again” to update the network list.
  • Use manual entry: If the network still doesn’t appear, tap “Add Network Manually” and enter the SSID and password yourself.

Connection Drops Frequently

  • Check signal strength: Use the Ring app’s signal meter. If it’s low, consider relocating your router or adding a Wi-Fi extender.
  • Update firmware: Go to “Device Health” > “Firmware” and check for updates. Outdated software can cause instability.
  • Avoid interference: Keep your doorbell away from microwaves, cordless phones, and thick walls that block Wi-Fi signals.

Forgot Router Login Details

  • Check the router label: Most routers have default login info printed on a sticker.
  • Reset the router: Press and hold the reset button (usually a small hole) for 10 seconds to restore factory settings. Note: This will disconnect all devices.
  • Contact your ISP: If you rent your router, your internet provider may assist with login details.

Tips for a Strong and Secure Connection

To keep your Ring Doorbell running smoothly after changing the SSID, follow these best practices:

  • Use a strong password: Combine uppercase, lowercase, numbers, and symbols. Avoid common words or phrases.
  • Enable WPA3 encryption: If your router supports it, use WPA3 for better security. Otherwise, WPA2 is acceptable.
  • Regularly update your router firmware: Manufacturers release updates to fix bugs and improve performance.
  • Limit connected devices: Too many devices on one network can slow down your doorbell’s connection.
  • Schedule reboots: Restart your router once a week to clear cache and refresh connections.

When to Reset Your Ring Doorbell

If you’ve tried everything and your doorbell still won’t connect, a factory reset may be necessary. This erases all settings and returns the device to its original state.

How to Reset Your Ring Doorbell

  1. Press and hold the orange setup button for 20–25 seconds.
  2. The light ring will flash white, then turn solid green when reset is complete.
  3. Reinstall the doorbell using the Ring app’s setup wizard.

Warning: A reset removes all custom settings, including motion zones and shared users. Only do this as a last resort.

Conclusion

Changing the SSID on your Ring Doorbell is a simple but important task that ensures your device stays connected, secure, and functional. Whether you’ve upgraded your router, moved to a new home, or just want better network performance, following the steps in this guide will help you reconnect your doorbell quickly and confidently.

Remember to use the Ring app for all setup changes, verify your connection after updating, and troubleshoot any issues with patience. With a strong Wi-Fi signal and proper configuration, your Ring Doorbell will continue to protect your home with reliable video, alerts, and two-way audio.

By staying proactive about your network settings, you’ll enjoy uninterrupted service and peace of mind. Now that you know how to change the SSID on your Ring Doorbell, you’re ready to handle future network updates with ease.