Changing the WiFi network on your Aiwit doorbell camera is simple when you follow the right steps. This guide walks you through the process using the Aiwit app, ensuring a stable connection and uninterrupted security monitoring.
Key Takeaways
- Use the Aiwit app: All WiFi changes must be done through the official Aiwit app—no physical buttons on the doorbell.
- Ensure 2.4GHz network: Aiwit doorbells only work with 2.4GHz WiFi networks, not 5GHz.
- Stay close during setup: Keep your phone and doorbell within 3–5 feet of the router for a strong signal during pairing.
- Reset if needed: If the doorbell won’t connect, perform a factory reset using the reset button on the device.
- Check signal strength: Weak WiFi can cause disconnections—use a WiFi analyzer app to test signal at the doorbell location.
- Update firmware: Always keep your Aiwit app and doorbell firmware up to date for best performance.
- Reconnect after power loss: If power goes out, you may need to reconfigure WiFi settings.
How to Change WiFi on Aiwit Doorbell Camera
So, you’ve moved to a new house. Or maybe your internet provider upgraded your router. Or perhaps your Aiwit doorbell camera keeps dropping offline—again. Whatever the reason, knowing how to change WiFi on Aiwit doorbell camera is a must-have skill for any smart home owner.
The good news? It’s not as hard as it sounds. With the right steps and a little patience, you can get your Aiwit doorbell back online in under 15 minutes. This guide will walk you through the entire process—from preparing your network to confirming a successful connection. We’ll also cover common pitfalls, troubleshooting tips, and how to avoid frustration along the way.
By the end of this guide, you’ll be able to confidently switch your Aiwit doorbell to a new WiFi network, whether it’s a different SSID, password, or router entirely. No technical degree required—just follow along, and you’ll be set.
Why You Might Need to Change Your WiFi Network
Visual guide about How to Change Wifi on Aiwit Doorbell Camera
Image source: safetywish.com
Before diving into the steps, let’s talk about why you might need to change the WiFi on your Aiwit doorbell camera in the first place. Understanding the reasons can help you avoid future issues and choose the best network setup.
One of the most common reasons is moving to a new home. If you’ve taken your Aiwit doorbell with you, it’s still connected to your old WiFi network. Unless you update the settings, it won’t work at your new place.
Another reason is upgrading your internet service. Many people switch from older routers to newer models—especially mesh systems or dual-band routers. If your new router has a different network name (SSID) or password, your doorbell won’t recognize it.
Sometimes, your internet provider may change your network settings without warning. For example, they might enable WPA3 security or switch to a 5GHz-only band. Since Aiwit doorbells only support 2.4GHz networks, this can cause connection problems.
You might also be dealing with a weak signal. If your doorbell is far from the router, it may struggle to stay connected. In that case, changing to a stronger network—or adding a WiFi extender—can help.
Finally, if your doorbell keeps going offline or freezing during live view, it could be a sign of an unstable connection. Reconfiguring the WiFi settings often resolves these issues.
No matter your reason, the process is the same. Let’s get started.
What You’ll Need Before You Begin
Before you change the WiFi on your Aiwit doorbell camera, make sure you have everything ready. Skipping this step can lead to frustration and failed attempts.
First, you’ll need your smartphone or tablet with the Aiwit app installed. This app is essential—it’s the only way to manage your doorbell’s settings. You can download it from the Apple App Store or Google Play Store. Make sure it’s the latest version to avoid compatibility issues.
Next, ensure your new WiFi network is active and working. Test it on another device like your phone or laptop. Confirm the network name (SSID) and password. Write them down if needed—typos are a common cause of setup failures.
Your Aiwit doorbell must be powered on. If it’s battery-powered, check the charge level. A low battery can interrupt the setup process. If it’s hardwired, make sure the power hasn’t been turned off at the breaker.
You’ll also need access to the doorbell itself. This means being near the front door, where the device is mounted. During setup, you’ll need to press a physical button on the doorbell, so you can’t do this remotely.
Lastly, be patient. The process can take 5–10 minutes, especially if your signal is weak or the app is slow. Rushing can lead to mistakes.
Step-by-Step Guide to Change WiFi on Aiwit Doorbell Camera
Now that you’re prepared, let’s walk through the actual process of changing the WiFi on your Aiwit doorbell camera. Follow these steps carefully, and you’ll have your doorbell connected to the new network in no time.
Step 1: Open the Aiwit App
Start by opening the Aiwit app on your smartphone or tablet. If you’re not already logged in, enter your account credentials. If you’ve forgotten your password, use the “Forgot Password” option to reset it.
Once logged in, you’ll see the main dashboard. This shows all your connected devices. Look for your Aiwit doorbell camera. It should appear with its name and a live preview if it’s currently online.
If your doorbell is offline, don’t worry—this is normal during a WiFi change. Just make sure it’s listed in the app. If it’s not showing up at all, you may need to re-add it later.
Step 2: Access Device Settings
Tap on your doorbell’s name or image to open its details. This will take you to the live view screen. Look for a gear icon or “Settings” button—usually in the top-right corner.
Tap on it to open the device settings menu. Here, you’ll find options like motion detection, night vision, and WiFi settings.
Scroll down until you see “WiFi Settings” or “Network Settings.” Tap on it. This is where you’ll begin the process of changing your network.
Step 3: Start the WiFi Setup Process
In the WiFi settings menu, you’ll see an option like “Change WiFi” or “Reconfigure Network.” Tap on it. The app will ask you to confirm that you want to change the network.
Confirm the action. The app will then instruct you to press the reset button on your doorbell camera. This puts the device into pairing mode.
Step 4: Press the Reset Button on the Doorbell
Now, go to your front door. Locate the reset button on your Aiwit doorbell. It’s usually a small, recessed button on the side or back of the device. You’ll need a paperclip or SIM tool to press it.
Press and hold the reset button for about 5–7 seconds. You’ll hear a beep or see a light flash—this means the doorbell is now in pairing mode.
Important: Do not release the button too early. If you let go before the beep, the reset won’t complete.
Once the doorbell is in pairing mode, return to your phone. The app should detect the device and prompt you to select a WiFi network.
Step 5: Select Your New WiFi Network
The app will scan for available networks. Look for your new WiFi network in the list. Tap on it to select it.
Make sure you choose the 2.4GHz version of your network. If your router broadcasts both 2.4GHz and 5GHz under the same name (like “HomeWiFi”), the app may not distinguish between them. In that case, temporarily rename your 5GHz network (e.g., “HomeWiFi_5G”) so you can clearly select the 2.4GHz one.
Enter the password for your new network. Double-check for typos—even a single wrong character will prevent connection.
Tap “Connect” or “Next” to proceed.
Step 6: Wait for the Connection to Complete
The app will now attempt to connect your doorbell to the new WiFi network. This can take 1–3 minutes. During this time, the doorbell may blink or beep intermittently.
Do not close the app or walk away. Stay within range of the doorbell and router. If the signal is weak, the connection may fail.
If successful, the app will show a confirmation message like “WiFi Connected” or “Setup Complete.” Your doorbell should now appear online in the app.
Step 7: Test the Connection
Once connected, test your doorbell to make sure everything works.
First, check the live view. Tap on the doorbell in the app and see if the video loads. If it does, great—your connection is stable.
Next, test motion detection. Walk in front of the doorbell and see if you receive a notification. You can also check the event history to confirm recordings.
Finally, try two-way audio. Tap the microphone icon and speak. You should hear your voice through the doorbell’s speaker. If the audio is clear, your connection is solid.
If any of these tests fail, go to the troubleshooting section below.
Tips for a Smooth WiFi Change
Changing WiFi on your Aiwit doorbell camera doesn’t have to be stressful. With a few smart tips, you can avoid common mistakes and ensure a successful setup.
First, always use a 2.4GHz network. Aiwit doorbells do not support 5GHz WiFi. Even if your router offers both bands, the doorbell can only connect to the slower, longer-range 2.4GHz band. If your network is 5GHz-only, you’ll need to enable the 2.4GHz band in your router settings.
Second, stay close to the router during setup. The pairing process requires a strong signal. If you’re too far away, the connection may drop. Stand within 3–5 feet of the doorbell and router while the app is running.
Third, avoid using special characters in your WiFi password. While most symbols are supported, some can cause issues during pairing. Stick to letters, numbers, and basic symbols like hyphens or underscores.
Fourth, restart your router before starting. A quick reboot can clear temporary glitches and improve signal strength. Unplug the router for 30 seconds, then plug it back in.
Fifth, update the Aiwit app and firmware. Outdated software can cause compatibility problems. Check for updates in your app store and in the Aiwit app’s settings menu.
Finally, be patient. The process can take longer than expected, especially on older devices. Don’t rush or repeat steps unnecessarily—follow the guide in order.
Troubleshooting Common Issues
Even with careful preparation, things can go wrong. Here’s how to fix the most common problems when changing WiFi on your Aiwit doorbell camera.
Issue: Doorbell Won’t Enter Pairing Mode
If pressing the reset button doesn’t trigger a beep or light, the doorbell may not be powered properly. Check the battery level or ensure the wires are connected securely.
Try pressing the reset button again, holding it for a full 7 seconds. If it still doesn’t respond, perform a factory reset by holding the button for 15–20 seconds until you hear multiple beeps.
Issue: App Can’t Find the Doorbell
If the app doesn’t detect the doorbell during setup, make sure both devices are on the same network. Your phone should be connected to the same WiFi you’re trying to assign to the doorbell.
Also, ensure Bluetooth is enabled on your phone. The Aiwit app uses Bluetooth to communicate with the doorbell during pairing.
Issue: Connection Fails After Password Entry
This is usually due to an incorrect password or network incompatibility. Double-check the password for typos. If you’re sure it’s correct, try restarting your router and the doorbell.
If the problem persists, your network may be using WPA3 security. Aiwit doorbells typically support WPA2. Log into your router settings and change the security mode to WPA2-PSK.
Issue: Doorbell Connects but Drops Frequently
This indicates a weak signal. Use a WiFi analyzer app (like “WiFi Analyzer” for Android or “NetSpot” for iOS) to check signal strength at your front door.
If the signal is weak, consider moving your router closer, adding a WiFi extender, or using a powerline adapter.
Issue: Live View is Laggy or Freezes
This could be due to network congestion or low bandwidth. Limit the number of devices using the network during testing. Also, reduce the video quality in the Aiwit app settings if needed.
How to Prevent Future WiFi Issues
Once your Aiwit doorbell is connected to the new WiFi, take steps to keep it stable long-term.
First, monitor signal strength regularly. Use a WiFi analyzer app monthly to check for interference or dead zones.
Second, avoid changing your network name or password frequently. If you do, remember to update the doorbell.
Third, keep your router firmware updated. Manufacturers often release updates that improve compatibility and security.
Fourth, consider a dedicated IoT network. Some routers allow you to create a separate 2.4GHz network just for smart devices. This reduces congestion and improves reliability.
Finally, check your doorbell’s battery or wiring periodically. A weak power source can cause disconnections, even with a strong WiFi signal.
Conclusion
Changing the WiFi on your Aiwit doorbell camera is a straightforward process when you follow the right steps. From opening the app to testing the connection, each stage is designed to ensure a stable and secure link between your doorbell and your home network.
Remember to use a 2.4GHz network, stay close during setup, and double-check your password. If you run into issues, the troubleshooting tips above can help you get back on track.
With your doorbell now connected to the new WiFi, you can enjoy uninterrupted live views, instant motion alerts, and clear two-way audio. Your home security is back online—and better than ever.
Don’t forget to update your app and firmware regularly, and keep an eye on signal strength. A little maintenance goes a long way in keeping your Aiwit doorbell running smoothly.
Now that you know how to change WiFi on Aiwit doorbell camera, you’re equipped to handle any network change with confidence. Whether you’re moving, upgrading, or just troubleshooting, you’ve got this.