Changing the WiFi network on your Aiwit doorbell is simple with the right steps. This guide walks you through the entire process, from preparation to final testing, ensuring a seamless connection every time.
Key Takeaways
- Preparation is key: Ensure your new WiFi network is active, and your phone is connected to it before starting the setup.
- Use the Aiwit app: The official app is required to reconfigure your doorbell’s WiFi settings—no web portal or third-party tools needed.
- Reset if necessary: If the doorbell won’t connect, a factory reset may be required to clear old network data.
- Check signal strength: Place your doorbell within range of your router or use a WiFi extender for better connectivity.
- Follow LED indicators: Pay attention to the doorbell’s light signals—they guide you through each phase of the setup.
- Update firmware regularly: Keep your Aiwit doorbell updated to avoid compatibility issues with new WiFi networks.
- Test after setup: Always verify live video, motion detection, and alerts work properly once WiFi is changed.
How to Change WiFi on Aiwit Doorbell: A Complete Step-by-Step Guide
If you’ve recently changed your internet service provider, upgraded your router, or moved to a new home, you may need to update the WiFi network on your Aiwit doorbell. While Aiwit doorbells are designed for easy setup, changing the WiFi connection isn’t always obvious—especially if you’re doing it for the first time.
Don’t worry! This comprehensive guide will walk you through the entire process of changing the WiFi on your Aiwit doorbell. Whether you’re switching from 2.4GHz to 5GHz (or vice versa), moving to a new network name (SSID), or troubleshooting a dropped connection, we’ve got you covered.
By the end of this guide, you’ll know exactly how to reconnect your Aiwit doorbell to a new WiFi network, avoid common pitfalls, and ensure your smart doorbell stays online and functional. We’ll also share pro tips and troubleshooting advice to help you get the best performance from your device.
Let’s get started!
Why You Might Need to Change the WiFi on Your Aiwit Doorbell
There are several common reasons why you might need to update the WiFi settings on your Aiwit doorbell:
- Moving to a new home: Your new house likely has a different WiFi network, so your doorbell needs to connect to the new router.
- Router replacement: Upgrading to a newer router often means a new network name or password.
- Internet provider change: Switching ISPs usually results in a new modem and WiFi setup.
- Network optimization: You may want to connect to a less congested network or a dedicated IoT network.
- Forgotten password: If you’ve changed your WiFi password and didn’t update the doorbell, it will lose connection.
Regardless of the reason, the process is straightforward—but it requires careful attention to detail. Skipping a step or entering the wrong password can leave your doorbell offline and unresponsive.
What You’ll Need Before Starting
Before you begin changing the WiFi on your Aiwit doorbell, gather the following items to ensure a smooth process:
- A smartphone or tablet: You’ll need this to run the Aiwit app (available on iOS and Android).
- The Aiwit app installed: Download it from the App Store or Google Play if you haven’t already.
- Your new WiFi network name (SSID) and password: Make sure you have the exact spelling and case sensitivity correct.
- Access to your doorbell: You’ll need to be near the doorbell to press buttons and observe LED lights.
- A stable power source: Ensure the doorbell is powered—either via wired connection or fully charged battery.
- Your doorbell’s QR code or serial number: Found on the device or in the app under device settings.
Having these ready will save you time and frustration during the setup.
Step 1: Open the Aiwit App and Log In
The first step in changing your Aiwit doorbell’s WiFi is to open the official Aiwit app on your smartphone or tablet.
Launch the App
Tap the Aiwit app icon on your home screen. If you don’t have it installed, search for “Aiwit” in the App Store (iOS) or Google Play Store (Android) and download it.
Visual guide about How to Change Wifi on Aiwit Doorbell
Image source: safetywish.com
Log In to Your Account
Use the same email and password you used when setting up your doorbell. If you’ve forgotten your login details, use the “Forgot Password” option to reset it.
Ensure Your Doorbell Is Listed
Once logged in, go to the “Devices” tab. You should see your Aiwit doorbell listed. If it’s not there, you may need to re-add it—more on that later.
Check Current Connection Status
Tap on your doorbell to open its live view. If you see a “No Signal” or “Offline” message, it’s likely already disconnected from WiFi. This is normal if you’ve changed networks.
Step 2: Prepare Your Doorbell for WiFi Reconfiguration
Before you can change the WiFi, your doorbell needs to be in setup mode. This allows it to scan for and connect to new networks.
Wake Up the Doorbell
If your doorbell is battery-powered, make sure it’s charged. Press the doorbell button to wake it up. You should see a light indicator—usually white or blue.
Enter Setup Mode
To enter setup mode, you’ll need to press and hold the setup button on the doorbell. This is typically a small button on the back or side of the device.
- Press and hold the button for about 5–7 seconds.
- Watch for the LED light to start flashing rapidly—this means it’s in pairing mode.
- If the light turns solid or doesn’t flash, try again. Sometimes it takes a few attempts.
Confirm Setup Mode in the App
Return to the Aiwit app. The app should detect that the doorbell is ready to connect. You may see a prompt like “Device found” or “Ready to configure.”
Step 3: Connect Your Phone to the New WiFi Network
This step is crucial: your smartphone must be connected to the same WiFi network you want the doorbell to use.
Go to Phone Settings
Open your phone’s Settings app and navigate to WiFi or Network settings.
Select the New Network
Choose the WiFi network you want your doorbell to connect to. Enter the password carefully—double-check for typos, uppercase letters, and special characters.
Stay Connected
Do not disconnect from this network during the setup process. The app needs to communicate with the doorbell over the same network.
Tip: Use 2.4GHz Only
Most Aiwit doorbells only support 2.4GHz WiFi networks. If your router broadcasts both 2.4GHz and 5GHz under the same name, temporarily rename the 5GHz network or disable it to avoid confusion.
Step 4: Add or Reconfigure the Doorbell in the App
Now it’s time to guide the app through the WiFi change process.
Tap “Add Device” or “Reconnect”
In the Aiwit app, go to the “Devices” tab and look for an option like “Add Device,” “+”, or “Reconnect.” Tap it.
Select Your Doorbell Model
The app will ask you to choose your device type. Select “Doorbell” and then pick your specific Aiwit model (e.g., Aiwit Video Doorbell Pro).
Scan the QR Code
Use your phone’s camera to scan the QR code on the back of your doorbell. If you can’t scan it, you can manually enter the serial number.
Follow On-Screen Prompts
The app will guide you through the next steps. It may ask you to confirm the WiFi network name (SSID) and enter the password.
Enter WiFi Password Carefully
Type in the exact password for your new WiFi network. Pay attention to:
- Uppercase and lowercase letters
- Numbers and symbols (e.g., @, #, !)
- Spaces (if any)
Even a single mistake will prevent the doorbell from connecting.
Step 5: Wait for the Doorbell to Connect
After entering the WiFi details, the app will send the information to your doorbell. This is where patience is key.
Observe the LED Light
Watch the doorbell’s LED indicator:
- Flashing blue: Searching for network
- Solid blue: Connecting to WiFi
- Solid green: Successfully connected
- Red or no light: Connection failed
This usually takes 30–60 seconds.
Do Not Interrupt the Process
Avoid pressing buttons, moving the doorbell, or closing the app during this time. Interrupting the connection can cause it to fail.
Check App Confirmation
Once connected, the app should display a success message like “Device connected” or “Setup complete.” You may also hear a voice prompt from the doorbell saying “WiFi connected.”
Step 6: Test the Connection
Now that your doorbell is connected to the new WiFi network, it’s time to make sure everything works.
Open Live View
Tap on your doorbell in the app and open the live video feed. You should see a clear, real-time image of your front door.
Test Motion Detection
Walk in front of the doorbell to trigger motion detection. The app should send a notification and start recording.
Check Two-Way Audio
Tap the microphone icon and speak. You should hear your voice through the doorbell’s speaker. Ask someone to press the doorbell button and listen for the chime.
Verify Cloud or Local Storage
If you use cloud recording, check that events are being saved. For local storage (microSD), ensure recordings are accessible in the app.
Monitor for a Few Hours
Leave the doorbell running and check back later to ensure it stays connected. Some networks may drop devices after inactivity.
What to Do If the Connection Fails
Sometimes, despite following all steps correctly, the doorbell won’t connect to the new WiFi. Here’s how to troubleshoot.
Double-Check the WiFi Password
The most common cause of failure is an incorrect password. Re-enter it carefully, or try typing it into another device to confirm it works.
Ensure 2.4GHz Network
Confirm your doorbell supports 5GHz (most don’t). If your router uses a combined SSID, temporarily separate the bands or rename the 5GHz network.
Move Closer to the Router
Weak signal can prevent connection. Stand near the router with the doorbell in hand during setup, then reinstall it.
Restart the Doorbell
Power cycle the doorbell by removing the battery (if applicable) or turning off the power for 10 seconds. Reinsert and try again.
Restart Your Phone and Router
Turn off your phone’s WiFi, wait 10 seconds, then turn it back on. Also, restart your router to refresh the network.
Reset the Doorbell to Factory Settings
If all else fails, perform a factory reset:
- Press and hold the setup button for 10–15 seconds until the LED flashes red.
- The doorbell will reset and return to factory settings.
- Re-add it in the app as if it were new.
Note: This will erase all settings and recordings.
Pro Tips for a Smooth WiFi Change
Here are some expert tips to make changing your Aiwit doorbell’s WiFi easier and more reliable:
- Use a WiFi analyzer app: Apps like “WiFi Analyzer” (Android) or “NetSpot” (iOS) can help you check signal strength at your doorbell’s location.
- Install a WiFi extender: If your front door is far from the router, a mesh system or extender can boost the signal.
- Update the app and firmware: Before changing WiFi, check for app updates and install the latest doorbell firmware via the app.
- Write down your WiFi details: Keep your SSID and password in a secure note or password manager for future reference.
- Test during low-traffic hours: Network congestion can affect setup. Try changing WiFi early in the morning or late at night.
- Label your networks: If you have multiple networks (e.g., “Home_2.4G” and “Home_5G”), use clear names to avoid confusion.
How to Avoid Common Mistakes
Even experienced users make errors when changing WiFi on smart devices. Here’s how to avoid the most common pitfalls:
- Don’t skip the app: Never try to change WiFi through a web browser or third-party app. Only the official Aiwit app works.
- Don’t rush the process: Take your time entering the password and waiting for the connection. Rushing leads to mistakes.
- Don’t ignore LED signals: The lights tell you what’s happening. Learn what each color and pattern means.
- Don’t assume 5GHz works: Most Aiwit doorbells only support 2.4GHz. Check your model’s specs before assuming otherwise.
- Don’t forget to test: A successful setup doesn’t guarantee full functionality. Always test video, audio, and alerts.
When to Contact Aiwit Support
If you’ve tried everything and your doorbell still won’t connect, it may be time to reach out for help.
Contact Aiwit customer support if:
- The doorbell won’t enter setup mode
- The app doesn’t detect the device
- The LED lights behave abnormally (e.g., flashing red continuously)
- You suspect a hardware issue
- Firmware updates fail repeatedly
You can usually find support through the app (Settings > Help & Support) or on the official Aiwit website. Have your model number and purchase details ready.
Conclusion
Changing the WiFi on your Aiwit doorbell doesn’t have to be stressful. With the right preparation, a clear understanding of the steps, and a little patience, you can successfully reconnect your doorbell to a new network in under 10 minutes.
Remember: always use the Aiwit app, double-check your WiFi password, and test all features after setup. If you run into trouble, don’t hesitate to reset the device or contact support.
By following this guide, you’ll keep your Aiwit doorbell online, secure, and ready to protect your home—no matter how many times your WiFi changes.
Stay connected, stay safe!