Installing a Ring Doorbell angle kit helps optimize your device’s field of view for better motion detection and clearer footage. This guide walks you through every step, from choosing the right kit to final testing, ensuring a secure and professional-looking installation.
Key Takeaways
- Choose the correct angle kit: Ring offers 15°, 30°, and 45° mounting brackets—select based on your door’s position and desired coverage.
- Turn off power before installing: Always shut off electricity at the breaker to avoid electrical shock when working near wiring.
- Use the included tools and hardware: The Ring angle kit comes with screws, anchors, and a level—use them for a secure fit.
- Adjust the angle before final tightening: Loosely attach the bracket first so you can fine-tune the tilt for optimal camera positioning.
- Test motion zones after installation: Use the Ring app to check coverage and adjust motion sensitivity to reduce false alerts.
- Seal gaps to prevent water damage: Apply silicone caulk around the bracket edges if installing outdoors to protect wiring from moisture.
- Reconnect and sync your device: After mounting, reattach your Ring Doorbell, reconnect power, and confirm it’s online in the app.
How to Install a Ring Doorbell Angle Kit: A Complete Step-by-Step Guide
So you’ve got a Ring Doorbell—great choice! But maybe you’ve noticed it’s not capturing the full picture. Perhaps it’s missing packages left at your doorstep, or motion alerts keep triggering from the street instead of your walkway. That’s where the Ring Doorbell angle kit comes in. This simple yet powerful accessory lets you tilt your doorbell to the perfect angle, improving visibility, reducing false alerts, and boosting your home’s security.
In this guide, we’ll walk you through how to install a Ring Doorbell angle kit from start to finish. Whether you’re mounting on brick, siding, or stucco, we’ve got you covered. You’ll learn how to choose the right kit, prepare your workspace, mount the bracket securely, and test your setup for maximum effectiveness. No electrician required—just a few tools, about 30 minutes, and this handy guide.
By the end, your Ring Doorbell will be perfectly positioned to monitor your entryway, giving you peace of mind and clearer footage every time someone approaches. Let’s get started!
What Is a Ring Doorbell Angle Kit?
A Ring Doorbell angle kit is an optional mounting accessory designed to adjust the viewing angle of your Ring Video Doorbell. Standard doorbell mounts are flat and attach directly to the wall, which works fine if your door is perfectly aligned with the walkway. But in most homes, the door is recessed, angled, or set back from the path—making a flat mount less effective.
Visual guide about How to Install a Ring Doorbell Angle Kit
Image source: ringdoorbellinstallationguy.com
The angle kit solves this by adding a wedge-shaped bracket that tilts your doorbell forward or to the side. Ring offers three standard angles: 15°, 30°, and 45°. Each kit includes the angled mounting plate, screws, wall anchors, a level, and sometimes a small screwdriver. Some kits also come with a weatherproof seal or gasket to protect against moisture.
Using an angle kit ensures your camera sees the area you care about—like your front steps, porch, or driveway—instead of just the wall or street. It also helps reduce glare from sunlight and minimizes blind spots caused by door frames or nearby walls.
Whether you have a Ring Video Doorbell (2nd Gen), Ring Video Doorbell 3, Ring Video Doorbell Pro, or Ring Video Doorbell Elite, there’s an angle kit compatible with your model. Just make sure to check compatibility before purchasing.
Why Use an Angle Kit?
You might be wondering: “Do I really need an angle kit?” The answer depends on your home’s layout. Here are the top reasons homeowners choose to install one:
- Improved field of view: Tilt your camera downward to capture packages, visitors, or pets at your doorstep.
- Reduced false alerts: Avoid motion triggers from cars, trees, or pedestrians passing by on the sidewalk.
- Better night vision: Proper angling reduces glare from porch lights or streetlights, improving nighttime footage.
- Enhanced security: See more of your entryway, including side approaches or hidden corners.
- Professional look: A properly angled doorbell looks cleaner and more intentional than a crooked or awkwardly mounted one.
For example, if your front door is set back 6 inches from the exterior wall, a 30° angle kit can tilt the camera forward so it faces the walkway instead of the brick. Or if your door opens inward and blocks the camera’s view, a 15° side-angle kit can shift the lens outward for a clearer shot.
Even if your current setup seems okay, a small adjustment can make a big difference. Many Ring users report fewer missed deliveries and more accurate motion alerts after installing an angle kit.
Choosing the Right Angle Kit
Not all angle kits are the same. Ring offers different versions based on the degree of tilt and compatibility with your doorbell model. Here’s how to pick the right one:
1. Check Your Ring Doorbell Model
First, confirm which Ring Doorbell you own. The angle kit must be compatible with your specific model. For example:
- Ring Video Doorbell (1st–4th Gen)
- Ring Video Doorbell 2
- Ring Video Doorbell 3 / 3 Plus
- Ring Video Doorbell Pro / Pro 2
- Ring Video Doorbell Elite
You can find your model number in the Ring app under Device Health or on the back of the device itself.
2. Determine the Best Angle
Next, decide how much tilt you need. Ring offers three standard angles:
- 15° kit: Best for slight adjustments—ideal if your door is only slightly recessed or you want to shift the view a little to the left or right.
- 30° kit: Most popular option—great for doors set back a few inches or when you want a broader downward view.
- 45° kit: For significant angles—use when your door is deeply recessed or you need a steep downward tilt to see the ground.
To test which angle works best, you can temporarily prop up your doorbell with a book or wedge to simulate the tilt. Open the Ring app and check the live view to see what the camera captures.
3. Consider Left vs. Right Angle Kits
Some kits are designed to angle the doorbell to the left or right, not just forward. This is useful if your door swings open and blocks the camera’s view. For example, if your door opens to the right, a left-angle kit can shift the lens outward so it still sees the walkway.
Check the product description to see if the kit is labeled “left,” “right,” or “universal.” Universal kits can be flipped to work on either side.
4. Buy from Authorized Retailers
Always purchase your angle kit from Ring’s official website, Amazon (sold by Ring), or authorized retailers. Avoid third-party sellers offering cheap knockoffs—they may not fit properly or could damage your device.
Tools and Materials You’ll Need
Before you begin, gather these tools and materials. Most are included in the kit, but it’s good to have backups just in case.
Included in the Ring Angle Kit:
- Angled mounting bracket (15°, 30°, or 45°)
- Screws and wall anchors
- Small level
- Optional: Weatherproof gasket or seal
- Optional: Mini screwdriver
You May Need:
- Power drill or screwdriver
- Phillips head screwdriver
- Tape measure
- Pencil or marker
- Stud finder (optional, for wood or drywall)
- Silicone caulk (for outdoor sealing)
- Ladder (if mounting high)
- Safety goggles
Tip: If you’re mounting on brick, stucco, or concrete, use a masonry drill bit to create pilot holes for the anchors. For wood or drywall, a regular drill bit works fine.
Step-by-Step Installation Guide
Now that you’ve chosen the right kit and gathered your tools, it’s time to install. Follow these steps carefully to ensure a secure and professional-looking mount.
Step 1: Turn Off the Power
Safety first! Even though Ring Doorbells run on low voltage, they’re still connected to your home’s electrical system. To avoid any risk of shock:
- Locate your home’s circuit breaker panel.
- Find the breaker labeled “doorbell” or “chime.” If unsure, turn off the main breaker to be safe.
- Test the doorbell by pressing the button—if it doesn’t ring, the power is off.
Note: If you have a battery-powered Ring Doorbell (like the Ring Video Doorbell 3), you can skip this step. But if it’s hardwired, always turn off the power.
Step 2: Remove the Existing Mount (If Applicable)
If you’re replacing a standard mount with an angle kit, you’ll need to remove the old one first.
- Unscrew the two mounting screws on the back of your Ring Doorbell.
- Gently pull the device away from the wall.
- Disconnect the wires by loosening the terminal screws or unclipping the connectors.
- Remove the old mounting plate by unscrewing it from the wall.
Tip: Take a photo of the wiring before disconnecting it. This makes reconnection easier later.
Step 3: Position the Angle Bracket
Hold the angled mounting bracket against the wall where you want to install it. Use the included level to make sure it’s straight.
- Decide the direction of the angle—forward, left, or right—based on your needs.
- Use a pencil to mark the screw holes on the wall.
- Measure the height—Ring recommends mounting between 48 and 60 inches from the ground for optimal coverage.
Pro Tip: Stand back and look at the angle. Imagine where the camera will point. Adjust the bracket slightly if needed before marking.
Step 4: Drill Pilot Holes
Drilling pilot holes ensures the screws go in cleanly and reduces the risk of cracking the wall.
- Use a drill bit slightly smaller than the wall anchors.
- Drill into each marked spot, about 1–1.5 inches deep.
- If mounting on brick or concrete, use a masonry bit and hammer drill for best results.
Caution: Wear safety goggles to protect your eyes from dust and debris.
Step 5: Attach the Angle Bracket
Now it’s time to secure the bracket to the wall.
- Insert the wall anchors into the pilot holes (if needed).
- Align the bracket with the holes.
- Use the provided screws to attach the bracket. Tighten just enough to hold it in place—don’t overtighten, or you could crack the plastic.
- Use the level again to confirm the bracket is straight.
Tip: If the bracket feels loose, double-check that the anchors are fully seated. You may need longer screws for thicker walls.
Step 6: Reconnect the Wiring
With the bracket secure, reconnect your doorbell’s wires.
- Strip about 1/4 inch of insulation from the wire ends if needed.
- Attach the wires to the terminal screws on the back of the Ring Doorbell. Most models are polarity-neutral, but if your doorbell has “+” and “-” labels, match them correctly.
- Tighten the screws to secure the wires.
Note: If you have a battery-powered model, skip this step and proceed to mounting the device.
Step 7: Mount the Ring Doorbell
Now attach your Ring Doorbell to the angle bracket.
- Align the mounting slots on the back of the device with the bracket.
- Slide the doorbell down until it clicks into place.
- Secure it with the two mounting screws (usually included with the doorbell, not the angle kit).
- Use a screwdriver to tighten the screws—just enough to hold it firmly.
Pro Tip: Don’t overtighten! The plastic housing can crack under pressure.
Step 8: Seal the Edges (Optional but Recommended)
To protect against rain, snow, and moisture, apply a thin bead of silicone caulk around the edges of the bracket.
- Use a clear, waterproof silicone sealant.
- Run a small bead along the top and sides where the bracket meets the wall.
- Smooth it with your finger or a caulk tool.
- Let it dry for at least 2 hours before testing.
This step is especially important if you live in a rainy or humid climate.
Step 9: Restore Power and Test
Once everything is secure, it’s time to power up and test your setup.
- Turn the power back on at the breaker.
- Wait 30–60 seconds for the doorbell to reconnect.
- Open the Ring app on your phone.
- Go to Device Health and check if your doorbell is online.
- Tap “Live View” to see the camera feed.
If the image looks good, you’re almost done!
Step 10: Adjust Motion Zones and Settings
Now that your doorbell is angled correctly, fine-tune the settings for best performance.
- In the Ring app, go to Device Settings > Motion Settings.
- Tap “Motion Zones” and draw a box around the area you want to monitor (e.g., your walkway or porch).
- Adjust motion sensitivity—lower if you’re getting too many alerts, higher if you’re missing activity.
- Enable “People Only Mode” to reduce false alerts from animals or moving branches.
Test the motion detection by walking through the zone. Check your phone for alerts.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Problem: Doorbell Won’t Power On
Solution: Double-check that the power is restored at the breaker. Ensure the wires are securely connected. If using a battery model, charge the battery fully.
Problem: Blurry or Dark Video
Solution: Clean the camera lens with a microfiber cloth. Check for obstructions like spider webs or dirt. Adjust the angle if the lens is facing a bright light source.
Problem: Weak Wi-Fi Signal
Solution: Move your router closer or use a Wi-Fi extender. Avoid mounting the doorbell behind metal doors or thick walls.
Problem: Loose or Wobbly Mount
Solution: Tighten the mounting screws. If the bracket is still loose, use longer screws or add extra anchors.
Problem: Water Leaking Behind the Bracket
Solution: Reapply silicone caulk around the edges. Ensure the bracket is flush with the wall to prevent gaps.
Maintenance Tips
To keep your Ring Doorbell angle kit in top shape, follow these simple maintenance tips:
- Clean the camera lens monthly with a soft, dry cloth.
- Check the mounting screws every 6 months to ensure they’re tight.
- Inspect the sealant around the bracket for cracks or peeling.
- Update the Ring app and firmware regularly for security and performance improvements.
- Trim nearby bushes or trees that might block the camera’s view.
Conclusion
Installing a Ring Doorbell angle kit is a quick and easy way to dramatically improve your home security setup. With just a few tools and about 30 minutes of your time, you can adjust your camera’s view to capture exactly what matters—packages, visitors, and potential threats—while minimizing false alerts and blind spots.
By following this guide, you’ve learned how to choose the right kit, prepare your workspace, mount the bracket securely, and fine-tune your settings for optimal performance. Whether you’re dealing with a recessed door, an awkward angle, or just want a cleaner look, the angle kit is a smart upgrade that pays off in peace of mind.
So go ahead—mount that bracket, tilt that camera, and enjoy a clearer, smarter view of your front door. Your future self (and your packages) will thank you.