Installing an Aiwit doorbell is simple and straightforward, whether you’re replacing an old doorbell or setting up a new one. This guide walks you through every step—from choosing the right model to final testing—ensuring a secure and reliable installation.
Key Takeaways
- Choose the right Aiwit model: Decide between wired or wireless based on your home setup and power source availability.
- Turn off power before installation: Safety first—always shut off electricity at the breaker to avoid shocks or damage.
- Use the included mounting template: This ensures accurate drilling and a clean, professional look.
- Test connectivity during setup: Confirm Wi-Fi signal strength at the doorbell location before final mounting.
- Sync with the Aiwit app: Complete setup via the mobile app for live video, motion alerts, and two-way audio.
- Secure all screws and covers: Prevent weather damage and tampering by tightening all components properly.
- Troubleshoot common issues: Know how to reset, reconnect, or adjust settings if the doorbell doesn’t work as expected.
How to Install Aiwit Doorbell: A Complete Step-by-Step Guide
Upgrading your home security has never been easier—especially with smart doorbells like the Aiwit doorbell. Whether you’re replacing an old mechanical chime or installing your first video doorbell, the Aiwit offers crystal-clear video, motion detection, two-way audio, and smartphone alerts—all in a sleek, weather-resistant design. But how do you actually install it? Don’t worry. This comprehensive guide will walk you through the entire process, from unboxing to final testing, so you can enjoy peace of mind knowing your front door is protected.
In this guide, you’ll learn how to install an Aiwit doorbell safely and correctly, whether you’re using a wired or wireless model. We’ll cover everything: choosing the right spot, turning off power, mounting the device, connecting to Wi-Fi, syncing with the app, and troubleshooting common problems. By the end, you’ll have a fully functional smart doorbell that enhances your home’s security and convenience.
Let’s get started!
What You’ll Need Before You Begin
Before diving into the installation, it’s important to gather all the tools and materials you’ll need. Having everything ready will save time and prevent frustration mid-installation.
Here’s a checklist of what to prepare:
- Aiwit doorbell unit – Make sure it’s the correct model (wired or wireless) for your setup.
- Smartphone or tablet – Required to download and use the Aiwit app.
- Wi-Fi network – Your doorbell needs a stable 2.4 GHz Wi-Fi connection (5 GHz is not supported).
- Screwdriver (Phillips head) – For mounting and securing screws.
- Drill and drill bits – Only needed if you’re mounting into brick, concrete, or hard surfaces.
- Level – To ensure the doorbell is straight.
- Pencil – For marking drill holes.
- Voltage tester (for wired models) – To confirm power is off before working.
- Wire strippers (for wired models) – If you need to trim or re-strip existing doorbell wires.
- Batteries (for wireless models) – Usually included, but double-check the package.
- Ladder – If your doorbell location is high up.
Pro tip: If you’re unsure whether your home has existing doorbell wiring, look near your front door. You might see a small rectangular plate or a wire sticking out of the wall. If there’s no wire, you’ll likely need the wireless version of the Aiwit doorbell.
Step 1: Choose the Right Aiwit Doorbell Model
Aiwit offers both wired and wireless doorbell models, so your first decision is determining which one suits your home best.
Wired Aiwit Doorbell
The wired version connects directly to your existing doorbell wiring and chime. It draws power from your home’s electrical system, so you never have to worry about recharging batteries. This model is ideal if you already have a working doorbell circuit and want a reliable, always-on solution.
Visual guide about How to Install Aiwit Doorbell
Image source: aiwit.app
Wireless Aiwit Doorbell
The wireless model runs on rechargeable batteries and doesn’t require any wiring. It’s perfect for renters, homes without existing doorbell wiring, or anyone who wants a quick, tool-free installation. Just keep in mind that you’ll need to recharge the batteries every few months, depending on usage.
Which one should you choose? If you’re comfortable working with electricity and have existing wires, go wired. If you want simplicity and flexibility, choose wireless. Both models offer the same core features: HD video, night vision, motion alerts, and two-way talk.
Step 2: Turn Off the Power (For Wired Models Only)
Safety is critical when working with electrical systems. Before touching any wires, you must turn off the power to your doorbell circuit.
Locate Your Circuit Breaker
Go to your home’s main electrical panel (usually in the basement, garage, or utility closet). Look for a breaker labeled “Doorbell,” “Chime,” or something similar. If there’s no label, you may need to test breakers one by one.
Turn Off the Breaker
Switch the correct breaker to the “OFF” position. To be extra safe, use a non-contact voltage tester near the doorbell wires to confirm there’s no electricity flowing.
Test the Doorbell
Go back to your front door and press the existing doorbell button. If the chime doesn’t sound, the power is off. If it still rings, double-check the breaker or try another one.
Never skip this step. Even low-voltage doorbell systems can cause shocks or damage your new Aiwit doorbell if powered during installation.
Step 3: Remove the Old Doorbell (If Applicable)
If you’re replacing an existing doorbell, you’ll need to remove it first.
Unscrew the Old Plate
Use a screwdriver to remove the screws holding the old doorbell button in place. Gently pull the button away from the wall.
Disconnect the Wires
You’ll see two small wires connected to the back of the button. Loosen the screws holding them and carefully pull the wires free. Don’t let them fall back into the wall—tape them to the outside of the wall or hold them with a clip.
Clean the Area
Wipe down the wall surface to remove dust or debris. This ensures a clean, secure mount for your new Aiwit doorbell.
If you’re installing in a new location (no existing doorbell), skip to the next step.
Step 4: Choose the Best Mounting Location
Where you install your Aiwit doorbell affects its performance. Here’s how to pick the ideal spot.
Height Matters
Mount the doorbell at about 48 inches (4 feet) from the ground. This height captures most visitors’ faces clearly and reduces the chance of tampering.
Angle for Best View
Tilt the doorbell slightly downward so it points at the walkway or porch. Avoid pointing it directly at the sun or bright lights, which can cause glare.
Check Wi-Fi Signal
Use your smartphone to check Wi-Fi strength at the installation spot. Weak signal can cause lag, dropped connections, or failed recordings. If the signal is weak, consider using a Wi-Fi extender or choosing a different location.
Avoid Obstructions
Make sure trees, walls, or decorations don’t block the camera’s view. The Aiwit doorbell needs a clear line of sight to work effectively.
Pro tip: If you’re unsure, temporarily tape the doorbell to the wall and test it for a day. Adjust the position if needed before drilling.
Step 5: Use the Mounting Template
The Aiwit doorbell comes with a paper mounting template to help you drill accurate holes.
Position the Template
Hold the template against the wall at your chosen height. Use a level to make sure it’s straight. Mark the screw holes with a pencil.
Drill Pilot Holes
Use a drill bit slightly smaller than the screws provided. Drill into the marked spots. If you’re drilling into brick or concrete, use a masonry bit and wall anchors for extra support.
Insert Wall Anchors (If Needed)
For drywall or soft surfaces, push the included plastic anchors into the holes. This helps the screws grip securely.
Attach the Mounting Plate
Line up the mounting plate with the holes and screw it into place. Don’t overtighten—just snug enough to hold firmly.
The mounting plate is the backbone of your installation. A secure plate ensures the doorbell stays in place, even in wind or rain.
Step 6: Connect the Wires (Wired Models Only)
Now it’s time to connect your Aiwit doorbell to the existing wiring.
Strip the Wire Ends
If the exposed wire ends are too short or frayed, use wire strippers to remove about 1/4 inch of insulation. This ensures a clean connection.
Attach Wires to the Doorbell
Loosen the terminal screws on the back of the Aiwit doorbell. Insert one wire under each screw and tighten securely. It doesn’t matter which wire goes where—doorbell circuits are not polarized.
Secure the Doorbell to the Plate
Align the doorbell with the mounting plate and press it into place. You should hear a click when it locks. Use the included security screw to prevent tampering.
For wireless models, skip this step and proceed to battery installation.
Step 7: Install Batteries (Wireless Models Only)
If you’re using the wireless Aiwit doorbell, you’ll need to install the rechargeable batteries.
Open the Battery Compartment
Use a screwdriver to remove the cover on the back of the doorbell. Insert the batteries as indicated by the polarity markings (+ and -).
Reattach the Cover
Secure the cover with the screw. Make sure it’s tight to prevent moisture from entering.
Charge Before Use (If Needed)
If the batteries aren’t fully charged, plug the doorbell into a USB charger for a few hours before mounting. A full charge lasts 3–6 months, depending on usage.
Step 8: Mount the Doorbell
With the wiring or batteries in place, it’s time to attach the doorbell to the wall.
Align and Snap Into Place
Hold the doorbell against the mounting plate and press firmly until it clicks. Ensure it’s level and secure.
Tighten the Security Screw
Use the provided screw and screwdriver to fasten the doorbell to the plate. This prevents someone from easily removing it.
Check for Gaps
Make sure there are no large gaps between the doorbell and the wall. If needed, use the included anti-theft bracket or weatherproofing tape for a tighter seal.
Step 9: Turn the Power Back On (Wired Models)
If you turned off the breaker earlier, now’s the time to restore power.
Flip the Breaker
Return to the electrical panel and switch the breaker back to “ON.”
Test the Doorbell
Press the button on the Aiwit doorbell. You should hear a chime (if connected to a mechanical chime) or see a light on the device.
If nothing happens, double-check your wiring and breaker. Refer to the troubleshooting section below.
Step 10: Download and Set Up the Aiwit App
The Aiwit doorbell works with a free mobile app that lets you view live video, receive alerts, and talk to visitors.
Download the App
Search for “Aiwit” in the Apple App Store or Google Play Store. Download and install the app on your smartphone or tablet.
Create an Account
Open the app and sign up with your email address. Verify your account via the confirmation email.
Add Your Doorbell
Tap “Add Device” and select your Aiwit doorbell model. Follow the on-screen instructions to scan the QR code on the doorbell or enter the device ID manually.
Connect to Wi-Fi
Enter your Wi-Fi network name (SSID) and password. Make sure you’re connecting to a 2.4 GHz network—5 GHz is not supported.
Complete Setup
The app will guide you through naming your doorbell, setting motion zones, and adjusting notification preferences. You’re now ready to use your Aiwit doorbell!
Step 11: Test All Features
Before considering the installation complete, test every function to ensure everything works.
Live Video
Open the app and tap “Live View.” You should see a clear, real-time image from your doorbell.
Two-Way Audio
Tap the microphone icon and speak. Ask someone to stand near the doorbell and confirm they can hear you.
Motion Detection
Walk in front of the doorbell. You should receive a push notification on your phone within a few seconds.
Night Vision
Test the doorbell at night or in low light. The infrared LEDs should activate, providing a clear black-and-white image.
Doorbell Press
Press the button. You should hear a chime (if wired to a mechanical chime) and receive an alert on your phone.
If any feature isn’t working, check the troubleshooting section below.
Troubleshooting Common Aiwit Doorbell Issues
Even with careful installation, problems can arise. Here’s how to fix the most common issues.
Doorbell Won’t Turn On
For wired models: Check that the breaker is on and wires are securely connected. Use a voltage tester to confirm power. For wireless models: Ensure batteries are charged and installed correctly.
No Wi-Fi Connection
Make sure you’re using a 2.4 GHz network. Move closer to the router or use a Wi-Fi extender. Reboot your router and try reconnecting.
Poor Video Quality
Clean the camera lens with a soft cloth. Check for obstructions or glare. Ensure strong Wi-Fi signal at the doorbell location.
Motion Alerts Not Working
Open the app and check motion detection settings. Adjust sensitivity and motion zones. Make sure the doorbell is not facing a busy street or tree that triggers false alerts.
App Not Receiving Notifications
Check your phone’s notification settings. Allow the Aiwit app to send alerts. Ensure your phone isn’t in Do Not Disturb mode.
Doorbell Keeps Disconnecting
This is often a Wi-Fi issue. Reduce interference by moving the router closer or using a mesh network. Update the doorbell firmware via the app.
Chime Doesn’t Ring (Wired Models)
Verify the doorbell is compatible with your existing chime. Some smart doorbells require a digital chime or resistor. Check Aiwit’s compatibility list or contact support.
If problems persist, reset the doorbell by holding the setup button for 10 seconds, then reconfigure it through the app.
Maintenance Tips for Long-Term Performance
To keep your Aiwit doorbell working smoothly, follow these maintenance tips.
Clean the Lens Monthly
Use a microfiber cloth to wipe away dust, dirt, or fingerprints. Avoid harsh chemicals.
Check Battery Level (Wireless)
Monitor battery life in the app. Recharge when it drops below 20%.
Update Firmware
The app will notify you when updates are available. Install them to improve performance and security.
Inspect Mounting
Every few months, check that the doorbell is secure and hasn’t loosened over time.
Review Recordings
Periodically check saved videos to ensure motion detection is working correctly.
With regular care, your Aiwit doorbell will provide reliable service for years.
Conclusion
Installing an Aiwit doorbell is a smart way to boost your home’s security and convenience. Whether you choose the wired or wireless model, the process is straightforward when you follow the steps in this guide. From turning off the power and mounting the device to syncing with the app and testing features, each step ensures a safe and successful installation.
Remember: safety first, plan your location carefully, and don’t skip the app setup. With your Aiwit doorbell in place, you’ll enjoy real-time alerts, clear video, and peace of mind—all from your smartphone.
Now that you know how to install an Aiwit doorbell, it’s time to take action. Gather your tools, follow the steps, and enjoy the benefits of modern home security. Your front door will never be the same!