This guide walks you through installing your Ring Battery Doorbell Plus on brick with clear, easy-to-follow steps. You’ll learn the right tools, mounting techniques, and how to ensure a secure, long-lasting setup—even on tough brick surfaces.
Key Takeaways
- Use a masonry drill bit: Standard wood bits won’t work on brick. A 3/16″ or 1/4″ masonry bit is essential for clean, safe drilling.
- Anchor screws properly: Plastic wall anchors or concrete screws ensure the mounting plate stays secure in brick without cracking.
- Angle the doorbell for best view: Tilt the device slightly downward to capture visitors’ faces and avoid glare from sunlight.
- Test Wi-Fi signal before mounting: Weak signal can cause lag or disconnections. Use the Ring app to check signal strength at the installation spot.
- Charge the battery fully before installation: A full charge ensures your doorbell works right away and avoids mid-installation power issues.
- Use the included level tool: Keeping the doorbell straight improves video quality and gives a professional look.
- Consider a wedge or corner kit: If your door is recessed or angled, these accessories help optimize the camera’s field of view.
Introduction: Why Install Ring Battery Doorbell Plus on Brick?
Installing a Ring Battery Doorbell Plus on brick might seem tricky at first—after all, brick is harder than wood or siding, and drilling into it requires the right tools and technique. But with the proper preparation, it’s totally doable—and well worth the effort. The Ring Battery Doorbell Plus offers 1080p HD video, two-way talk, motion detection, and long-lasting rechargeable battery life, making it one of the best smart doorbells for homes with brick exteriors.
In this guide, you’ll learn exactly how to install your Ring Battery Doorbell Plus on brick, step by step. We’ll cover everything from choosing the right tools to securing the mounting plate, connecting to Wi-Fi, and troubleshooting common issues. Whether you’re a DIY beginner or a seasoned home improver, this guide will help you get your doorbell up and running safely and securely—without damaging your brick wall.
By the end, you’ll have a fully functional smart doorbell that enhances your home security and gives you peace of mind. Let’s get started!
What You’ll Need Before You Begin
Before you grab your drill and head to the front door, make sure you have all the necessary tools and materials. Having everything ready will save time and prevent frustration mid-installation.
Visual guide about How to Install Ring Battery Doorbell Plus on Brick
Image source: doorbellmount.com
Essential Tools and Materials
- Ring Battery Doorbell Plus kit: Includes the doorbell, mounting plate, screws, anchors, level tool, and security screwdriver.
- Masonry drill bit (3/16″ or 1/4″): Standard drill bits won’t cut through brick. A carbide-tipped masonry bit is a must.
- Power drill or hammer drill: A hammer drill works best for brick, but a regular drill with a hammer setting can also work.
- Screwdriver (Phillips head): For tightening screws and securing the mounting plate.
- Measuring tape: To find the ideal height and alignment.
- Pencil or chalk: For marking drill points.
- Vacuum or brush: To clean dust from drill holes.
- Optional: Wedge or corner mounting kit: If your door is recessed or the wall is angled, these help adjust the camera view.
Safety Gear
- Safety goggles to protect your eyes from brick dust.
- Dust mask to avoid inhaling fine particles.
- Gloves to protect your hands.
Pre-Installation Checklist
- Charge the Ring doorbell battery fully using the included USB cable.
- Download and set up the Ring app on your smartphone (iOS or Android).
- Test your Wi-Fi signal strength at the installation location using the app’s “Device Health” feature.
- Ensure the doorbell is within range of your Wi-Fi router (ideally within 30–50 feet).
Step 1: Choose the Right Location
The placement of your Ring doorbell is crucial for both security and functionality. You want a spot that captures clear video of visitors, avoids glare, and is within Wi-Fi range.
Ideal Height and Angle
The recommended height for a doorbell is between 48 and 60 inches from the ground. This ensures the camera can see faces clearly and reduces the risk of tampering. If your front door has a porch or steps, adjust accordingly so the camera isn’t too high or too low.
Check for Obstructions
- Avoid placing the doorbell directly under bright outdoor lights, which can cause glare or wash out the video.
- Don’t install it behind glass or screens, as this can blur the image or block the motion sensor.
- Make sure trees, bushes, or decorations won’t block the camera’s view.
Test Wi-Fi Signal
Open the Ring app and go to Device Health > Signal Strength. Hold your phone where you plan to install the doorbell and check the reading. You want at least two or three bars for reliable performance. If the signal is weak, consider moving your router, using a Wi-Fi extender, or choosing a different spot closer to the router.
Step 2: Mark and Drill Pilot Holes
Now it’s time to prepare the brick surface for mounting. This step requires precision to avoid cracking the brick or misaligning the doorbell.
Position the Mounting Plate
Hold the mounting plate (the flat bracket that comes with the Ring) against the brick at your chosen height. Use the included level tool to make sure it’s perfectly straight. If it’s crooked, your doorbell will look off-kilter and may not capture video properly.
Mark the Drill Points
Use a pencil or chalk to mark the center of each screw hole on the brick. Double-check the alignment with the level tool before drilling.
Drill into the Brick
- Put on your safety goggles and dust mask.
- Insert the masonry drill bit into your drill. Set the drill to hammer mode if available.
- Start drilling slowly at a 90-degree angle to the brick. Apply steady, gentle pressure—don’t force it.
- Drill about 1.5 to 2 inches deep for each hole. This gives the anchors enough room to grip securely.
- After drilling, use a vacuum or brush to remove all dust and debris from the holes. Clean holes ensure a tight fit for the anchors.
Tip: Drill into the Mortar (If Possible)
If your brick wall has visible mortar lines, consider drilling into the mortar instead of the brick itself. Mortar is softer and less likely to crack. However, make sure the mortar is solid and not crumbling. If it’s loose, stick to drilling into the brick.
Step 3: Install Wall Anchors and Screws
Brick is too hard for screws to grip directly, so you need wall anchors to create a secure hold.
Insert Plastic Wall Anchors
Push the included plastic wall anchors into the drilled holes. They should fit snugly—tap them gently with a hammer if needed, but don’t force them too deep.
Secure the Mounting Plate
Line up the mounting plate with the anchors and insert the screws through the plate and into the anchors. Use a screwdriver or drill (on low torque) to tighten them. Don’t overtighten—this can crack the brick or strip the anchors.
Alternative: Use Concrete Screws
If you prefer a stronger hold, you can use concrete screws (Tapcon screws) instead of plastic anchors. These screw directly into the brick and provide excellent grip. Just make sure your drill bit matches the screw size (usually 3/16″).
Step 4: Attach the Ring Doorbell
With the mounting plate securely in place, it’s time to attach the doorbell itself.
Connect the Battery
If you haven’t already, insert the fully charged battery into the back of the doorbell. Slide it in until it clicks into place.
Snap the Doorbell onto the Mounting Plate
Align the doorbell with the mounting plate and press it firmly until it clicks. You should hear a secure snap, indicating it’s locked in place.
Secure with the Security Screw
Use the included security screwdriver to tighten the small security screw at the bottom of the doorbell. This prevents theft and ensures the device stays firmly attached.
Step 5: Adjust the Angle (If Needed)
The Ring Battery Doorbell Plus has a slight tilt built into the mounting plate, but you may need to adjust it further for the best view.
Use a Wedge or Corner Kit
If your door is recessed or the wall is angled, the standard mount might not give you the ideal camera angle. Ring offers optional wedge kits (15° or 30°) and corner kits that let you tilt the doorbell downward or sideways.
- Wedge kit: Tilts the doorbell downward to better capture faces and packages.
- Corner kit: Mounts the doorbell on the side of a corner wall, ideal for homes with angled entryways.
To install a wedge or corner kit, simply replace the standard mounting plate with the angled one and follow the same drilling and anchoring steps.
Test the View
Open the Ring app and go to Live View to see what the camera captures. Adjust the angle if needed by loosening the security screw, repositioning the doorbell, and retightening.
Step 6: Connect to Wi-Fi and Set Up in the App
Now that the doorbell is physically installed, it’s time to connect it to your home network and complete the setup.
Open the Ring App
Launch the Ring app on your smartphone. If you haven’t already, create an account or log in.
Add a New Device
Tap the “Set Up a Device” button and select “Doorbells”, then choose “Ring Battery Doorbell Plus”.
Scan the QR Code
Use your phone’s camera to scan the QR code on the back of the doorbell. This pairs the device with your account.
Connect to Wi-Fi
Follow the on-screen prompts to connect the doorbell to your 2.4 GHz Wi-Fi network. (Note: The Ring Battery Doorbell Plus does not support 5 GHz networks.)
Complete Setup
- Name your doorbell (e.g., “Front Door”).
- Set up motion zones to focus on areas like your walkway or porch.
- Enable notifications so you’re alerted when motion is detected.
- Test two-way audio by speaking through the app.
Step 7: Test and Fine-Tune
Before calling the job done, run a few tests to ensure everything works perfectly.
Check Video Quality
Use Live View to check for clarity, lighting, and field of view. Make sure faces are visible and there’s no excessive glare or shadows.
Test Motion Detection
Walk in front of the doorbell to trigger motion alerts. Check that you receive notifications on your phone and that the video clips are saved.
Verify Two-Way Talk
Press the talk button in the app and speak. Ask someone to listen at the doorbell to confirm audio is clear both ways.
Check Battery Life
Go to Device Health in the app to see the battery percentage. A full charge should last 6–12 months, depending on usage.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Stay Connected to Wi-Fi
- Ensure you’re using a 2.4 GHz network (not 5 GHz).
- Move your router closer or use a Wi-Fi extender.
- Restart your router and the doorbell.
- Reconnect the doorbell in the app under Device Health > Reconnect to Wi-Fi.
Video Is Blurry or Dark
- Clean the camera lens with a soft, dry cloth.
- Adjust the angle to avoid direct sunlight or bright lights.
- Enable HDR in the app settings for better lighting balance.
Motion Alerts Are Too Sensitive
- Adjust motion zones to exclude areas like busy streets or trees.
- Lower the motion sensitivity in the app settings.
- Use People Only mode to reduce false alerts from cars or animals.
Doorbell Keeps Falling Off
- Make sure the security screw is fully tightened.
- Check that the wall anchors are properly seated and not cracked.
- Re-drill and use larger anchors or concrete screws if needed.
Battery Drains Too Fast
- Reduce motion detection frequency or use People Only mode.
- Turn off LED lights if not needed.
- Ensure the doorbell isn’t in a high-traffic area triggering constant alerts.
Maintenance Tips for Long-Term Performance
To keep your Ring Battery Doorbell Plus working smoothly for years, follow these simple maintenance tips.
Clean the Lens Regularly
Wipe the camera lens with a microfiber cloth every few weeks to remove dust, dirt, or fingerprints.
Check Battery Every 3–6 Months
Recharge the battery when the app alerts you or when the percentage drops below 20%. Avoid letting it fully drain.
Inspect Mounting Hardware
Every few months, check that the screws and anchors are still tight. Brick can shift slightly over time, especially in extreme weather.
Update Firmware
The Ring app will notify you when a firmware update is available. Install updates promptly to improve performance and security.
Conclusion: Enjoy Your Secure, Smart Front Door
Installing a Ring Battery Doorbell Plus on brick might take a little extra effort, but the result is a sleek, secure, and smart addition to your home. With the right tools, careful drilling, and proper anchoring, you can mount your doorbell safely and confidently—even on tough brick surfaces.
From choosing the perfect spot to connecting to Wi-Fi and fine-tuning motion settings, this guide has walked you through every step. Now you can enjoy real-time alerts, crystal-clear video, and two-way communication—all from your smartphone.
Remember, a well-installed doorbell not only boosts your home security but also adds convenience and peace of mind. So charge that battery, grab your drill, and take the first step toward a smarter, safer home today.