How to Install Ring Battery Doorbell Plus - Wireless

This guide walks you through installing the Ring Battery Doorbell Plus wirelessly, from unboxing to final setup. You’ll learn how to mount it, connect to Wi-Fi, and customize settings for optimal performance.

Key Takeaways

Choose the right location: Install your doorbell at chest height, within Wi-Fi range, and facing the front door for best motion detection.
Use the Ring app for setup: The free Ring app guides you through installation, Wi-Fi pairing, and device configuration.
Ensure strong Wi-Fi signal: A 2.4 GHz network with at least -70 dBm signal strength is recommended for reliable performance.
Charge the battery fully before use: The rechargeable battery should be charged for at least 5 hours before first installation.
Test motion zones and alerts: After setup, customize motion zones and test notifications to ensure everything works correctly.
Secure mounting is essential: Use the included screws and anchors to prevent theft or tampering.
Troubleshoot common issues: If connection fails, restart the device, check Wi-Fi, or reset the doorbell using the orange button.

How to Install Ring Battery Doorbell Plus – Wireless

Installing the Ring Battery Doorbell Plus wirelessly is a smart, DIY-friendly way to enhance your home security. Whether you’re replacing an old doorbell or adding one for the first time, this battery-powered model offers flexibility and ease of use. Unlike wired doorbells, the Ring Battery Doorbell Plus doesn’t require electrical wiring, making it perfect for renters or homes without existing doorbell circuits.

In this comprehensive guide, you’ll learn how to install your Ring Battery Doorbell Plus step by step. We’ll cover everything from unboxing and charging the battery to mounting the device, connecting it to your Wi-Fi network, and customizing settings in the Ring app. You’ll also get practical tips to ensure strong signal strength, avoid common pitfalls, and troubleshoot any issues that may arise.

By the end of this guide, you’ll have a fully functional smart doorbell that sends real-time alerts, records HD video, and lets you see and speak to visitors from anywhere using your smartphone. Let’s get started!

What’s in the Box?

Visual guide about How to Install Ring Battery Doorbell Plus – Wireless

Image source: media.cnn.com

Before you begin installation, it’s important to know what comes with your Ring Battery Doorbell Plus. Here’s what you’ll find inside the box:

Ring Battery Doorbell Plus unit
Rechargeable battery pack (pre-installed)
Mounting bracket (angled and flat options)
Screws and wall anchors
Security screw and screwdriver
Charging cable (micro-USB)
Quick start guide

Take a moment to inspect all components. If anything is missing or damaged, contact Ring customer support immediately. Having all parts ready will make the installation process smoother and faster.

Step 1: Charge the Battery

The Ring Battery Doorbell Plus runs on a rechargeable lithium-ion battery. Before installation, you must fully charge the battery to ensure optimal performance and avoid interruptions during setup.

How to Charge the Battery

Remove the battery pack from the doorbell by pressing the release button on the bottom of the device.
Connect the included micro-USB cable to the battery and plug the other end into a USB power adapter (not included).
Plug the adapter into a wall outlet.
Charge the battery for at least 5 hours. A full charge typically takes 4–6 hours.
Once charged, the LED indicator on the battery will turn solid green.

Pro Tip: Use a high-quality USB adapter (at least 1A output) for faster charging. Avoid using laptop USB ports, as they may charge the battery too slowly.

Reinstall the Battery

After charging, reinsert the battery into the doorbell by sliding it back into place until it clicks. Make sure it’s securely locked to prevent accidental dislodging.

Step 2: Download and Set Up the Ring App

The Ring app is essential for setting up and managing your doorbell. It’s available for free on both iOS and Android devices.

Download the App

Open the App Store (iOS) or Google Play Store (Android).
Search for “Ring – Always Home” and download the official app.
Open the app and create a Ring account if you don’t already have one.

Note: You’ll need a valid email address and phone number to create an account. Two-factor authentication is recommended for added security.

Log In and Add a Device

Log in to your Ring account.
Tap the menu icon (three lines) in the top-left corner.
Select “Set up a device.”
Choose “Doorbells” and then “Ring Video Doorbell (Battery).”
Follow the on-screen prompts to begin setup.

The app will guide you through the entire process, including Wi-Fi connection, device pairing, and configuration.

Step 3: Choose the Right Location

Selecting the best location for your doorbell is crucial for performance and security. Here’s what to consider:

Ideal Placement Tips

Height: Mount the doorbell at chest level (about 48 inches from the ground). This ensures clear video of visitors and minimizes blind spots.
Angle: Position it so the camera faces the front door or main entrance. Avoid pointing it directly at walls or bushes.
Wi-Fi Range: Stay within 30–50 feet of your Wi-Fi router. Thick walls, metal objects, or large appliances can weaken the signal.
Weather Protection: Install under an eave or porch to protect from rain, snow, and direct sunlight.
Privacy: Avoid pointing the camera at neighboring properties or public sidewalks to respect privacy.

Use the Ring App to Test Signal

Before drilling any holes, use the Ring app’s “Signal Strength” feature to check Wi-Fi strength at your chosen location:

Hold the doorbell in place where you plan to install it.
Open the Ring app and go to “Device Health.”
Tap “Test Wi-Fi Signal.”
The app will show signal strength in dBm. Aim for -60 dBm or higher (closer to zero is better).

If the signal is weak, consider relocating the doorbell or using a Wi-Fi extender.

Step 4: Install the Mounting Bracket

The Ring Battery Doorbell Plus comes with two mounting brackets: flat and angled (15°). Choose the one that best fits your doorframe or wall.

Mark the Mounting Holes

Hold the bracket against the wall where you want to install the doorbell.
Use a level to ensure it’s straight.
Mark the screw holes with a pencil.

Drill Pilot Holes

Use a drill bit slightly smaller than the screws to create pilot holes.
If mounting on brick, concrete, or tile, use a masonry bit and wall anchors.

Safety Tip: Wear safety goggles when drilling. Check for electrical wires or plumbing behind the wall using a stud finder.

Attach the Bracket

Align the bracket with the pilot holes.
Insert the screws and tighten them with a screwdriver or drill (use low torque to avoid cracking the bracket).
If using wall anchors, tap them into the holes first, then screw in the bracket.

Optional: Use the Angle Mount

If your doorbell needs to be tilted for better coverage, use the 15° angle mount. Attach it to the flat bracket before securing it to the wall.

Step 5: Attach the Doorbell to the Bracket

Once the bracket is secure, it’s time to mount the doorbell.

Secure the Doorbell

Slide the Ring Battery Doorbell Plus onto the mounting bracket.
Push it down until it clicks into place.
Use the included security screw and screwdriver to lock the device. This prevents theft and tampering.

Pro Tip: Don’t overtighten the security screw—just snug it enough to hold the doorbell firmly.

Step 6: Connect to Wi-Fi and Complete Setup

Now that the doorbell is mounted, it’s time to connect it to your Wi-Fi network and finalize the setup.

Pair the Doorbell with the App

Open the Ring app and return to the setup screen.
Tap “Continue” when prompted to connect to Wi-Fi.
Press and hold the orange button on the back of the doorbell for 5 seconds until the LED flashes white.
The app will search for the device. When found, select it.
Choose your Wi-Fi network and enter the password.
Wait for the app to confirm a successful connection (this may take 1–2 minutes).

Wi-Fi Requirements:

2.4 GHz network (the Ring Battery Doorbell Plus does not support 5 GHz).
WPA2 encryption (recommended).
Minimum signal strength of -70 dBm.

Customize Settings

After connecting, the app will prompt you to:

Name your doorbell (e.g., “Front Door”).
Set up motion zones to focus on specific areas (like your walkway).
Adjust motion sensitivity (low, medium, high).
Enable or disable notifications.
Set up Live View and two-way talk.

Take time to explore these settings. For example, reducing motion sensitivity can prevent false alerts from passing cars or blowing leaves.

Step 7: Test the Doorbell

Before considering the installation complete, test all features to ensure everything works.

Test Motion Detection

Walk in front of the doorbell to trigger motion.
Check if you receive a notification on your phone.
Open the app and view the recorded clip.

Test Two-Way Audio

Press the doorbell button (or trigger motion).
Open the Live View in the app.
Tap the microphone icon and speak. You should hear audio through the doorbell’s speaker.

Check Video Quality

Review the live feed and recorded clips.
Ensure the image is clear, even in low light (the doorbell has night vision).

If any feature isn’t working, proceed to the troubleshooting section below.

Troubleshooting Common Issues

Even with careful installation, you might encounter issues. Here’s how to fix the most common problems.

Doorbell Won’t Connect to Wi-Fi

Check Wi-Fi password: Re-enter it carefully—case-sensitive and no extra spaces.
Restart the router: Power cycle your Wi-Fi router and try again.
Move closer to the router: Temporarily place the doorbell near the router during setup.
Reset the doorbell: Press and hold the orange button for 20 seconds to factory reset, then retry setup.

Poor Video Quality or Lag

Weak signal: Use the app’s signal test and consider a Wi-Fi extender.
Interference: Keep the doorbell away from microwaves, cordless phones, or thick walls.
Low battery: Charge the battery fully—low power can affect performance.

Motion Alerts Not Working

Check motion zones: Ensure the active zone covers the area you want to monitor.
Adjust sensitivity: Increase sensitivity if alerts are missed.
Test at different times: Motion detection may vary in low light or bad weather.

Doorbell Keeps Disconnecting

Update the app: Make sure you’re using the latest version of the Ring app.
Check for firmware updates: The app will notify you if an update is available.
Reinstall the battery: Remove and reinsert the battery to reset the connection.

Maintenance and Best Practices

To keep your Ring Battery Doorbell Plus working smoothly, follow these maintenance tips:

Regularly Charge the Battery

The battery lasts 6–12 months depending on usage and climate.
Check battery level in the app under “Device Health.”
Charge the battery when it drops below 20%.

Clean the Lens and Sensors

Wipe the camera lens and motion sensor with a soft, dry cloth every few months.
Avoid using water or cleaning sprays directly on the device.

Update Firmware

Ring automatically pushes firmware updates to improve performance and security.
Ensure your doorbell stays connected to Wi-Fi to receive updates.

Review Recorded Clips

Save important clips to your phone or cloud storage.
Delete old clips to free up space (if using Ring Protect Plan).

Conclusion

Installing the Ring Battery Doorbell Plus wirelessly is a straightforward process that can significantly boost your home security. By following this guide, you’ve learned how to charge the battery, choose the right location, mount the device, connect to Wi-Fi, and customize settings using the Ring app.

With features like HD video, two-way talk, motion alerts, and night vision, your new doorbell keeps you connected to your home no matter where you are. Regular maintenance and smart placement will ensure long-term reliability and performance.

Whether you’re a tech新手 or a DIY pro, the Ring Battery Doorbell Plus offers a user-friendly, wire-free solution for modern home security. Now that it’s installed, enjoy peace of mind knowing you can see, hear, and speak to anyone at your door—from anywhere in the world.