Installing a Ring Doorbell Pro angle bracket is a simple upgrade that improves your doorbell’s field of view and motion detection accuracy. This guide walks you through every step—from choosing the right bracket to final testing—so you can get the best performance from your smart doorbell.
Key Takeaways
- Choose the right angle bracket: Ring offers 15°, 30°, and 45° brackets—select based on your door’s position and desired field of view.
- Turn off power before installation: Always shut off electricity at the breaker to avoid electrical shock when working with doorbell wiring.
- Use the included mounting template: This ensures accurate drilling and alignment for a secure, professional-looking installation.
- Adjust the angle before tightening screws: Loosely attach the bracket first so you can fine-tune the angle for optimal coverage.
- Test motion zones after installation: Use the Ring app to verify that the new angle improves detection and reduces blind spots.
- Seal screw holes with silicone: Prevent water damage by applying a small bead of outdoor silicone around the mounting screws.
- Reconnect and test the system: Once installed, restore power and confirm the doorbell powers on and connects to Wi-Fi.
How to Install Ring Doorbell Pro Angle Bracket
So, you’ve got your Ring Doorbell Pro up and running—great! But what if you’re noticing blind spots, people walking past without triggering motion alerts, or the camera angle just feels… off? That’s where the Ring Doorbell Pro angle bracket comes in. This small but powerful accessory lets you tilt your doorbell to the perfect angle, improving both video quality and motion detection.
In this guide, we’ll walk you through the entire process of installing a Ring Doorbell Pro angle bracket—step by step. Whether you’re mounting it on brick, wood, or siding, we’ve got you covered. You’ll learn how to choose the right bracket, prepare your tools, safely remove your existing doorbell, install the new bracket, and test everything for optimal performance. By the end, your Ring Doorbell Pro will be perfectly positioned to catch every visitor, package, or unexpected guest.
Let’s get started!
Why Use an Angle Bracket?
Before we dive into the installation, it’s worth understanding why you’d want to use an angle bracket in the first place. The Ring Doorbell Pro comes with a standard flat mount, which works well if your door is flush with the wall and faces directly forward. But in many homes, doors are recessed, angled, or surrounded by trim that blocks the camera’s view.
An angle bracket solves these problems by allowing you to tilt the doorbell inward or outward. This adjustment gives you a clearer view of your porch, driveway, or walkway. It also improves motion detection by ensuring the sensor can “see” people approaching from the sides or at an angle.
For example, if your front door is set back from the sidewalk, a 30° or 45° bracket can help the camera capture people walking up the path. Without it, they might enter the frame too late—or not at all.
Additionally, the angle bracket can help reduce glare from sunlight or porch lights, especially if your doorbell faces east or west. By tilting the lens slightly downward, you minimize reflections and get a clearer image at night.
What You’ll Need
Before you begin, gather all the tools and materials. Having everything ready will make the process smoother and faster.
Here’s what you’ll need:
- Ring Doorbell Pro angle bracket (15°, 30°, or 45°)
- Phillips head screwdriver
- Drill (if mounting into brick, concrete, or hard siding)
- Masonry drill bit (if drilling into brick or concrete)
- Level
- Pencil or marker
- Wire strippers (optional, in case you need to trim wires)
- Electrical tape
- Silicone sealant (optional, for weatherproofing)
- Smartphone with the Ring app installed
Most of these items are likely already in your toolbox. The angle bracket itself can be purchased directly from Ring’s website or through authorized retailers like Amazon. Make sure you buy the correct model—Ring sells angle brackets specifically designed for the Doorbell Pro, so don’t use one meant for the standard Ring Video Doorbell.
Step 1: Choose the Right Angle Bracket
Not all angle brackets are the same. Ring offers three options: 15°, 30°, and 45°. Choosing the right one depends on your home’s layout and how much adjustment you need.
15° Angle Bracket
This is the mildest tilt and works well if your door is only slightly recessed or if you want to fine-tune the angle without making a big change. It’s ideal for homes with narrow porches or where the door is close to the wall.
Visual guide about How to Install Ring Doorbell Pro Angle Bracket
Image source: bigamartusax.s3-accelerate.amazonaws.com
30° Angle Bracket
This is the most popular choice. It provides a noticeable improvement in field of view without being too extreme. Use this if your door is set back a few inches or if you want better coverage of a walkway or driveway.
45° Angle Bracket
This offers the steepest angle and is best for deeply recessed doors or homes where the camera needs to look outward significantly. Be cautious with this one—too much tilt can cause the camera to point at the ground or miss people approaching from the side.
To decide, stand back and look at your door. Imagine where people walk and where you want the camera to focus. If they approach from the left or right, a 30° or 45° bracket might help. If they come straight up the steps, a 15° or flat mount may suffice.
You can also use the Ring app’s “View Live Feed” feature to test different angles before buying. Temporarily tilt the doorbell with a wedge or tape to see how it affects the view.
Step 2: Turn Off the Power
Safety first! The Ring Doorbell Pro is wired into your home’s electrical system, so you must turn off the power before removing or adjusting it.
Locate Your Breaker Box
Find your home’s main electrical panel (breaker box). It’s usually in the basement, garage, or utility closet.
Identify the Doorbell Circuit
Look for a breaker labeled “doorbell,” “chime,” or something similar. If it’s not labeled, you may need to test each one. Turn off breakers one by one and check if your existing doorbell stops working.
Turn Off the Breaker
Once you’ve found the right breaker, switch it to the “off” position. For extra safety, use a non-contact voltage tester to confirm that power is off at the doorbell location.
Never skip this step. Even though doorbell voltage is low (typically 16–24V), it’s still electricity, and you don’t want to risk a shock—especially if your hands are near metal tools or wet surfaces.
Step 3: Remove the Existing Doorbell
Now that the power is off, it’s time to take down your current Ring Doorbell Pro.
Unscrew the Mounting Plate
Use a Phillips head screwdriver to remove the two screws on the bottom of the doorbell. These hold the device to the mounting plate. Gently pull the doorbell away from the wall.
Disconnect the Wires
You’ll see two wires connected to the back of the doorbell. These are usually labeled “Front” and “Trans” (transformer). Carefully disconnect them by loosening the terminal screws or pulling them out if they’re push-in connectors.
Secure the Wires
To prevent the wires from slipping back into the wall, wrap them around a pencil or use electrical tape to hold them in place. This makes reinstallation much easier.
Remove the Old Mounting Plate
If you’re replacing the entire mount (which you will be), unscrew the old mounting plate from the wall. Keep the screws—you might need them later.
At this point, you should have the wires exposed and the old mount removed. Take a moment to inspect the wiring. If the wires are frayed or damaged, trim them back with wire strippers and expose fresh copper. This ensures a solid connection.
Step 4: Prepare the Angle Bracket
Now it’s time to set up your new angle bracket. This step is simple but important for a secure installation.
Unpack the Bracket
Open the box and remove the angle bracket, screws, and any included hardware. Most Ring angle brackets come with two long screws and wall anchors.
Attach the Mounting Plate
The angle bracket has a flat side that attaches to the wall and a sloped side that holds the doorbell. Some models come with a separate mounting plate that screws into the bracket. If yours does, attach it now using the provided screws.
Check the Angle
Hold the bracket up to the wall where you plan to install it. Make sure the angle points in the direction you want the camera to face. For example, if your door is recessed to the left, the bracket should tilt to the right.
Use the Template (If Included)
Ring often includes a paper template with pre-marked drill holes. Tape this to the wall at the desired height (usually 48 inches from the ground). Use a level to ensure it’s straight, then mark the screw holes with a pencil.
If you don’t have a template, measure and mark the hole locations yourself. The standard spacing is about 2.5 inches apart, but check your bracket for exact dimensions.
Step 5: Drill Holes and Install the Bracket
With your marks in place, it’s time to secure the bracket to the wall.
Drill Pilot Holes
Use a drill to create pilot holes at the marked spots. If you’re drilling into wood or soft siding, a regular drill bit is fine. For brick, concrete, or hard stone, use a masonry bit and hammer drill. Go slowly to avoid cracking the material.
Insert Wall Anchors (If Needed)
If you’re mounting into drywall, brick, or another hollow or hard surface, insert the included wall anchors. Tap them gently with a hammer until they’re flush with the wall.
Attach the Bracket
Line up the bracket with the holes and insert the screws. Don’t tighten them all the way yet—leave them slightly loose so you can adjust the angle if needed.
Check the Level
Use a level to make sure the bracket is straight. Even a small tilt can affect the camera’s view. Adjust as needed, then tighten the screws securely.
Seal the Screw Holes (Optional)
To prevent water from seeping into the wall, apply a small bead of outdoor silicone sealant around each screw head. This is especially important if you’re mounting on exterior brick or stucco.
Step 6: Reconnect the Wires and Mount the Doorbell
With the bracket securely in place, it’s time to reconnect your doorbell.
Strip the Wires (If Necessary)
If the wire ends are damaged or too short, use wire strippers to expose about 1/4 inch of fresh copper. This ensures a solid connection.
Connect the Wires
Attach the two wires to the terminals on the back of the Ring Doorbell Pro. It doesn’t matter which wire goes where—the doorbell is not polarity-sensitive. Tighten the screws to secure the connections.
Attach the Doorbell to the Bracket
Slide the doorbell onto the mounting plate or bracket. It should click into place. Secure it with the two bottom screws using your Phillips head screwdriver.
Double-Check the Angle
Before tightening everything, step back and look at the camera angle. Make sure it’s pointing where you want it. If it’s off, loosen the bracket screws slightly, adjust, and retighten.
Step 7: Restore Power and Test the System
You’re almost done! Now it’s time to bring your doorbell back to life.
Turn the Power Back On
Go to your breaker box and switch the doorbell circuit back on. Wait a few seconds for the system to power up.
Check the Doorbell
Look at the doorbell’s LED light. It should glow solid blue, indicating it’s receiving power and connecting to Wi-Fi.
Open the Ring App
Launch the Ring app on your smartphone. Go to the device settings for your Doorbell Pro. You should see it come online within a minute or two.
Test the Live View
Tap “Live View” to see the camera feed. Check that the angle looks correct and that you can see the desired area—your porch, walkway, or driveway.
Adjust Motion Zones
Go to “Motion Settings” and customize your motion zones. With the new angle, you may need to resize or reposition the zones to focus on high-traffic areas and ignore trees or passing cars.
Test Motion Detection
Walk in front of the doorbell from different angles to see if it triggers alerts. If it misses you, adjust the angle slightly or widen the motion zones.
Troubleshooting Common Issues
Even with careful installation, you might run into a few hiccups. Here’s how to fix the most common problems.
Doorbell Won’t Power On
If the LED doesn’t light up, double-check the wiring. Make sure the wires are securely connected and not touching each other. Also, confirm the breaker is on and the voltage is correct (use a multimeter if needed).
Poor Wi-Fi Connection
If the doorbell connects but the video is choppy, it might be too far from your router. Consider moving your Wi-Fi extender closer or using a Ring Chime Pro to boost the signal.
Blind Spots Remain
If people still walk past without triggering alerts, try a steeper angle bracket or install a second camera (like a Ring Spotlight Cam) to cover the gap.
Water Leaking Around Screws
If you notice moisture around the mounting screws, remove them and apply more silicone sealant. Let it dry completely before reattaching.
Doorbell Falls Off
If the bracket feels loose, the wall anchors may not be suitable for your wall type. Remove the bracket, drill new holes, and use heavier-duty anchors or toggle bolts for better support.
Tips for a Professional-Looking Installation
A clean, secure installation not only works better but also looks great. Here are some pro tips to elevate your setup.
- Use a level every time: Even a small tilt can make the camera look crooked. Always double-check with a level before tightening screws.
- Hide the wires: If possible, tuck excess wire into the wall or use wire covers to keep the area neat.
- Paint the bracket (optional): If the bracket stands out against your wall, you can spray-paint it to match your siding or trim.
- Install during daylight: Natural light makes it easier to see wires, drill holes, and check alignment.
- Keep the app updated: Ring frequently releases firmware updates that improve performance and security.
Conclusion
Installing a Ring Doorbell Pro angle bracket is a smart, simple upgrade that can dramatically improve your home security. By adjusting the camera angle, you gain better visibility, more accurate motion detection, and fewer blind spots. Whether you’re dealing with a recessed door, angled walkway, or just want to fine-tune your setup, the angle bracket gives you the flexibility you need.
The process is straightforward: choose the right angle, turn off the power, remove the old mount, install the new bracket, reconnect the wires, and test everything. With the right tools and a little patience, you can complete the job in under an hour.
Remember to use the included template, seal the screw holes, and adjust the motion zones in the app. And if you run into any issues, the troubleshooting tips above should help you get back on track.
Now that your Ring Doorbell Pro is perfectly positioned, you can enjoy peace of mind knowing you’ll never miss a visitor, delivery, or unexpected event again. Stay safe, stay connected, and enjoy your smarter home!