Installing the Ring Battery Doorbell Plus is simple and doesn’t require wiring. This guide walks you through unboxing, mounting, app setup, and troubleshooting for a seamless experience.
Key Takeaways
- No wiring needed: The Ring Battery Doorbell Plus runs on a rechargeable battery, making it ideal for renters or homes without existing doorbell wiring.
- Use the Ring app: Download the free Ring app (iOS or Android) to guide you through setup, customize settings, and test your device.
- Choose the right location: Mount the doorbell at chest height (48 inches) and within Wi-Fi range for optimal performance and video quality.
- Secure mounting is key: Use the included tools and anchors to firmly attach the mounting bracket to prevent theft or damage.
- Test after installation: Always test motion detection, live view, and notifications to ensure everything works before finishing.
- Maintain regularly: Charge the battery every 6–12 months and clean the lens monthly for clear video footage.
- Troubleshoot common issues: If the doorbell won’t connect, check Wi-Fi signal, reset the device, or re-pair it in the app.
How to Install the Ring Battery Doorbell Plus
Upgrading your home security has never been easier—especially with the Ring Battery Doorbell Plus. This sleek, wire-free smart doorbell offers HD video, two-way audio, motion alerts, and night vision, all powered by a long-lasting rechargeable battery. Whether you’re a tech newbie or a DIY pro, installing this device is straightforward and can be done in under 30 minutes.
In this complete guide, you’ll learn how to install the Ring Battery Doorbell Plus from start to finish. We’ll cover everything from unboxing and preparing your door area to mounting the device, setting it up in the Ring app, and troubleshooting common issues. By the end, you’ll have a fully functional smart doorbell that keeps your home safe and gives you peace of mind—no electrician required.
What’s in the Box?
Before you begin, let’s make sure you have all the parts. Open the box and check that you have the following components:
Visual guide about How to Install the Ring Battery Doorbell Plus
Image source: i.ytimg.com
- Ring Battery Doorbell Plus unit
- Rechargeable battery pack
- Mounting bracket (angled and flat options)
- Screws and wall anchors
- Security screw and tool
- Charging cable (micro-USB)
- User guide and quick start card
If anything is missing, contact Ring customer support or the retailer where you purchased the device. It’s also a good idea to keep the box and packaging until you’ve confirmed everything works.
Tools You’ll Need
While the Ring Battery Doorbell Plus comes with most of what you need, you’ll need a few basic tools to complete the installation:
- Phillips-head screwdriver (or electric drill with a Phillips bit)
- Drill (optional, for harder surfaces like brick or concrete)
- Level (to ensure the doorbell is straight)
- Pencil (for marking drill holes)
- Smartphone or tablet with the Ring app installed
Most people already have these tools at home. If not, they’re inexpensive and widely available at hardware stores.
Step 1: Charge the Battery
Before installing, make sure the battery is fully charged. A dead or low battery can cause setup issues or prevent the doorbell from working properly.
How to Charge the Battery
- Remove the battery from the doorbell by pressing the release button on the bottom of the device.
- Connect the included micro-USB cable to the battery and plug the other end into a USB power source (like a wall adapter or computer).
- Charge for at least 5–6 hours. A full charge typically takes about 5 hours, but it’s best to leave it overnight if possible.
- Once charged, reinsert the battery into the doorbell until it clicks into place.
Pro Tip: Always charge the battery indoors. Avoid charging in extreme temperatures (below 32°F or above 104°F), as this can damage the battery.
Step 2: Download and Set Up the Ring App
The Ring app is essential for setting up and managing your doorbell. It’s available for free on the App Store (iOS) and Google Play (Android).
How to Install the Ring App
- Open your phone’s app store.
- Search for “Ring – Always Home” and download the app.
- Open the app and create a Ring account (or log in if you already have one).
- Tap the “+” icon in the top right corner and select “Set up a device.”
- Choose “Doorbells” and then “Battery Doorbell Plus.”
The app will now guide you through the setup process. Make sure your phone is connected to your home Wi-Fi network (2.4 GHz is required; 5 GHz is not supported during setup).
Step 3: Choose the Right Location
Where you mount your doorbell affects video quality, motion detection, and Wi-Fi signal. Follow these guidelines for the best results:
- Height: Mount the doorbell at chest level—about 48 inches (4 feet) from the ground. This ensures clear facial recognition and avoids blind spots.
- Angle: Position it so the camera faces the walkway or driveway, not directly into the sun or a busy street (to reduce false alerts).
- Wi-Fi Range: Stay within 30–50 feet of your router. If your front door is far from the router, consider a Wi-Fi extender.
- Obstructions: Avoid placing it behind glass, metal doors, or thick walls, which can block the signal.
Example: If your front door is on the side of the house and far from the router, you might need to install a Wi-Fi extender near the door or use a mesh network system.
Step 4: Remove Your Old Doorbell (If Applicable)
If you’re replacing an existing wired doorbell, you’ll need to remove it first. Don’t worry—you won’t be left without a doorbell, since the Ring Battery Doorbell Plus is wireless.
How to Remove a Wired Doorbell
- Turn off the power to the doorbell at the circuit breaker (for safety).
- Unscrew the old doorbell from the wall.
- Disconnect the wires (take a photo first for reference, though you won’t need them).
- Cap the wires with wire nuts and tuck them safely into the wall.
- Patch any holes if needed, or use the Ring mounting bracket to cover them.
Note: Even though the Ring doorbell is battery-powered, some users choose to connect it to existing wiring using the Ring Plug-In Adapter (sold separately) for continuous power. This guide focuses on battery-only installation.
Step 5: Install the Mounting Bracket
The mounting bracket holds the doorbell securely in place. You can choose between a flat bracket (for flat surfaces) or an angled bracket (to adjust the viewing angle).
How to Mount the Bracket
- Hold the bracket against the wall at the desired height (48 inches).
- Use a level to make sure it’s straight.
- Mark the screw holes with a pencil.
- Drill pilot holes if needed (especially for brick, concrete, or stucco).
- Insert wall anchors if mounting into drywall or a soft surface.
- Secure the bracket with the provided screws using a screwdriver or drill.
Pro Tip: If you’re mounting on brick or concrete, use a masonry drill bit and plastic anchors for a secure fit. Avoid over-tightening screws, as this can crack the bracket.
Step 6: Attach the Doorbell to the Bracket
Once the bracket is secure, it’s time to attach the Ring Battery Doorbell Plus.
How to Attach the Doorbell
- Slide the doorbell onto the mounting bracket from the top down.
- Push it firmly until it clicks into place.
- Use the security screw and tool (included) to lock the doorbell to the bracket. This prevents theft.
Important: Always use the security screw. Without it, the doorbell can be easily removed by pulling it upward.
Step 7: Complete Setup in the Ring App
Now that the doorbell is mounted, finish the setup in the Ring app.
How to Finish Setup
- Open the Ring app and follow the on-screen prompts.
- When prompted, press and hold the orange button on the back of the doorbell for 5 seconds until the light ring flashes white.
- The app will search for the device and connect it to your Wi-Fi network.
- Name your doorbell (e.g., “Front Door”) and select your location.
- Customize settings like motion zones, alerts, and video quality.
Pro Tip: Enable “Motion Alerts” and “Live View” during setup so you can test the features right away.
Step 8: Test Your Doorbell
Before considering the job done, test everything to make sure it works properly.
How to Test the Doorbell
- Press the doorbell button to trigger a ring. You should hear a chime (if you have a Ring Chime or Echo device) and receive a notification on your phone.
- Open the Ring app and tap “Live View” to see the camera feed.
- Walk in front of the doorbell to test motion detection. You should receive an alert.
- Speak through the app to test two-way audio.
If any feature isn’t working, check the troubleshooting section below.
Step 9: Customize Settings
The Ring app lets you personalize your doorbell to fit your lifestyle.
Recommended Settings
- Motion Zones: Define areas where you want motion alerts (e.g., driveway but not sidewalk).
- Alert Frequency: Choose how often you receive notifications (immediate, every 5 minutes, etc.).
- Video Quality: Set to “Standard” to save battery or “Enhanced” for better clarity.
- Night Vision: Automatically adjusts in low light—no setup needed.
- Linked Devices: Connect to a Ring Chime, Echo Show, or smart lock for added convenience.
Example: If you get frequent false alerts from passing cars, reduce the motion zone to only cover your porch.
Step 10: Maintain Your Doorbell
To keep your Ring Battery Doorbell Plus working smoothly, regular maintenance is key.
Maintenance Tips
- Charge the battery: Every 6–12 months, depending on usage. The app will notify you when the battery is low.
- Clean the lens: Wipe the camera lens monthly with a soft, dry cloth to remove dust and smudges.
- Check for updates: The Ring app automatically updates firmware, but check occasionally for new features.
- Inspect the mount: Ensure the doorbell is secure and not loose after storms or temperature changes.
Pro Tip: Keep the charging cable in a safe place so you can easily recharge the battery when needed.
Troubleshooting Common Issues
Even with careful installation, you might run into problems. Here’s how to fix the most common issues:
Doorbell Won’t Connect to Wi-Fi
- Make sure you’re using a 2.4 GHz network (5 GHz is not supported).
- Move closer to the router during setup.
- Restart your router and try again.
- Reset the doorbell by holding the orange button for 20 seconds.
No Notifications or Alerts
- Check that notifications are enabled in the Ring app and your phone’s settings.
- Ensure motion zones are set correctly.
- Verify the battery is charged.
Poor Video Quality
- Clean the camera lens.
- Check Wi-Fi signal strength in the app.
- Move the router or use a Wi-Fi extender.
Battery Drains Too Fast
- Reduce motion sensitivity or alert frequency.
- Turn off “Pre-Roll” if not needed.
- Ensure the doorbell isn’t in direct sunlight, which can overheat the battery.
Doorbell Falls Off or Is Loose
- Make sure the security screw is tightened.
- Reinforce the mounting bracket with longer screws or anchors.
- Use the angled bracket for better grip on uneven surfaces.
Conclusion
Installing the Ring Battery Doorbell Plus is a smart, simple way to enhance your home security. With no wiring required, you can set it up in under 30 minutes and start enjoying features like HD video, two-way talk, and real-time alerts. By following this guide—choosing the right location, charging the battery, using the Ring app, and testing everything—you’ll ensure a smooth and successful installation.
Remember to maintain your doorbell regularly and customize settings to fit your needs. Whether you’re home or away, the Ring Battery Doorbell Plus gives you peace of mind and keeps your property secure. Now that you know how to install the Ring Battery Doorbell Plus, you’re ready to take the next step toward a smarter, safer home.